1. Sarrera
This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.
Mesedez, irakurri arretaz eskuliburu hau gailua erabili aurretik eta gorde etorkizunean erreferentzia gisa.
2. Segurtasun informazioa
- Always ensure the device is clean and dry before use.
- Ez jarri gailua muturreko tenperatura, hezetasun edo eguzki-argitara.
- Saihestu gailua kolpe gogorrak erortzea edo jasaten.
- Ez saiatu gailua zeuk desmuntatzen edo konpontzen. Jo ezazu langile kualifikatuengana zerbitzurako.
- Mantendu gailua haurren eskura.
- Tokiko araudien arabera bota bateriak arduraz.
3. Produktua amaitu daview
The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.
1. irudia: Aurrealdea view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.
3.1 Funtsezko osagaiak
- LCD pantaila: Shows measurement readings, units, and mode indicators.
- MODE botoia: Used to switch between measurement modes (Single, Continuous, Differential).
- UNIT botoia: Used to switch between metric (µm) and imperial (mils) units.
- ZERO botoia: Used for zero calibration and powering the device on/off.
- Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.
4. Konfigurazioa
4.1 Bateriaren instalazioa
Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.
4.2 Piztu/Itzaltzea
Eduki sakatuta ZERO button to power on the device. To power off, press and hold the ZERO button again. The device also features an automatic shut-off function to conserve battery life.
5. Funtzionamendu-argibideak
The GYS 059856 offers three measurement modes and supports both metric and imperial units.
5.1 Selecting Measurement Units
Sakatu UNITATEA button to toggle between metric (µm) and imperial (mils) units.
5.2 Neurketa moduak
Sakatu MODUA button to cycle through the following measurement modes:
- Single Measurement Mode: Takes a single reading each time the probe is placed on the surface.
- Continuous Measurement Mode: Continuously takes readings as the probe is moved across the surface.
- Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.
5.3 Neurketa bat egitea
- Ensure the surface to be measured is clean and free of debris.
- Select the desired measurement unit and mode.
- Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
- Read the thickness value displayed on the LCD screen.
- Lift the device from the surface to prepare for the next measurement (in Single mode).
6. Kalibrazioa
Accurate measurements depend on proper calibration. The device supports three calibration functions:
6.1 Zero Kalibrazioa
This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the ZERO botoia).
6.2 Bi puntuko kalibratzea
This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.
6.3 Easy Calibration
Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.
Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.
7. Mantentzea
- Garbiketa: Garbitu gailua zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Biltegiratzea: Gorde gailua leku lehor eta fresko batean, eguzki-argitik eta muturreko tenperaturetatik babestuta. Denbora luzez gordetzen baduzu, kendu bateriak.
- Zunda zaintzea: Keep the measurement probe clean and free from scratches or damage.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Gailua ez da pizten. | Bateriak gutxi edo agortuta; bateriaren polaritate okerra. | Replace batteries; check battery orientation. |
| Irakurketa okerrak. | Device not calibrated; dirty probe; surface not clean; incorrect measurement mode. | Perform calibration; clean probe and surface; select appropriate measurement mode. |
| Display shows "OL" or "Err". | Measurement range exceeded; sensor error. | Ensure measurement is within device's range; restart device. If error persists, contact support. |
9. Zehaztapenak
- Eredua: GYS 059856
- Fabrikatzailea: GYS
- Produktuaren neurriak (L x W x H): 10.5 x 6.1 x 2.8 cm
- Pisua: 137 gramo
- Neurketa-printzipioa: Non-magnetic coating on metallic surfaces
- Neurketa Unitateak: Metric (µm), Imperial (mils)
- Neurketa moduak: Single, Continuous, Differential
- Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
- Itzaltze automatikoa: Bai
- ASIN: B09GS7G1N4
- Fabrikatzailearen erreferentzia: 059856
- Ordezko piezen erabilgarritasuna: Informazioa ez dago eskuragarri
10. Bermea eta Laguntza
For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.
GYS Official Webgunea: www.gys.fr
