Gravity Warzone WZ10US Subwoofer-aren argibideen eskuliburua

1. Produktua amaitu daview

The Gravity Warzone WZ10US is a 10-inch active compact subwoofer designed to fit discreetly within your vehicle's spare tire hub, providing powerful bass without occupying valuable cargo space. Its robust die-cast aluminum housing ensures durability and stable low-end extension, while the 10-inch feather-light fiberglass woofer cone delivers fast, tight, and deep bass with minimal distortion.

Ezaugarri nagusiak:

• Diseinu trinkoa: Specifically engineered to fit inside a 10-inch spare tire, saving trunk space.
• Potentzia handiko irteera: Delivers up to 1000 Watts of peak power for deep and impactful bass.
• 2 Ohm Voice Coil: Offers flexible wiring options for various ampdeformatzaileen konfigurazioak.
• Die-Cast Aluminum Housing: Provides excellent density and strength for stable performance and heat dissipation.
• Kontrol integratuak: Features phase shift, low pass filter, and bass boost adjustments for optimal sound tuning.
• Kablezko urrutiko kontrola: Allows convenient adjustment of bass levels from the driver's seat.
• Piztu/Itzali automatikoa: For high-level connections, simplifying integration with factory head units.

Figure 1.1: The Gravity Warzone WZ10US active subwoofer with its wired remote control.

2. Segurtasun informazio garrantzitsua

Please read all instructions carefully before installation and use. Failure to follow these guidelines may result in injury, damage to the product, or damage to your vehicle.

• Instalazio profesionala gomendatzen da: Instalazioaren edozein alderdiri buruz ziur ez bazaude, kontsultatu autoko audio teknikari kualifikatu batekin.
• Potentzia deskonexioa: Zirkuitulaburrak eta deskarga elektrikoak saihesteko, deskonektatu beti ibilgailuaren bateriaren terminal negatiboa edozein lan elektriko hasi aurretik.
• Kableatu egokia: Ensure all wiring connections are secure and properly insulated to prevent shorts and fire hazards. Use appropriate gauge wire for power and ground connections.
• Aireztapena: Although designed for compact spaces, ensure the subwoofer has adequate ventilation to prevent overheating. Do not block any vents.
• Muntatzeko segurtasuna: Securely mount the subwoofer to prevent it from shifting during vehicle movement, which could cause injury or damage.
• Bolumen mailak: Bolumen maila altuen eraginpean denbora luzez egoteak entzumen kalteak eragin ditzake. Doitu bolumena arduraz.
• Uraren esposizioa: This product is not waterproof. Avoid exposing it to moisture or liquids.

3. Zer dago kutxan

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• Gravity Warzone WZ10US 10" Active Subwoofer
• Kable bidezko urrutiko agintea
• Power/Speaker Input Harness
• Mounting Hardware (screws, brackets, foam pads)
• Erabiltzailearen eskuliburua (dokumentu hau)

4. Konfigurazioa eta instalazioa

The WZ10US subwoofer is designed for installation within the hub of your vehicle's spare tire. Ensure your spare tire well has sufficient depth and diameter to accommodate the unit.

4.1 Kokatzea eta Muntatzea

1. Locate your vehicle's spare tire well. Remove the spare tire and any existing tools or covers.
2. Place the WZ10US subwoofer into the center of the spare tire. Ensure it sits flush and does not interfere with the tire's structure or the vehicle's trunk floor cover.
3. Utilize the provided mounting hardware to secure the subwoofer. The subwoofer is designed to be held in place by the spare tire's central bolt or a similar securing mechanism. If your vehicle uses a plastic post, you may need to adapt the mounting. The subwoofer has a central threaded insert on its underside for this purpose.
4. Apply the foam pads to the contact points of the mounting brackets to prevent rattles and provide a snug fit.

Figure 4.1: Subwoofer positioned within a spare tire well.

Figure 4.2: Underside of the subwoofer showing the central mounting point and connection ports.

4.2 Kableatutako konexioak

Before making any electrical connections, ensure the vehicle's negative battery terminal is disconnected.

• Potentzia (B+): Connect the main power wire (typically red) from the subwoofer's harness to the vehicle's positive battery terminal. Use an in-line fuse (not included, recommended 15A) as close to the battery as possible.
• Lurra (GND): Connect the ground wire (typically black) from the subwoofer's harness to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
• Urruneko piztea (REM):
  • Maila baxuko sarrera (RCA): If using RCA inputs from an aftermarket head unit, connect the remote turn-on wire from the head unit to the REM terminal on the subwoofer's harness.
  • High-Level Input (Speaker Level): If connecting directly to factory speaker wires, the subwoofer features an auto power on/off function. In this case, the REM wire may not be needed, or it can be connected to an accessory power source that turns on with the ignition.
• Audio sarrera:
  • RCA sarrera: Connect RCA cables from your head unit's subwoofer or full-range pre-outs to the RCA input jacks on the subwoofer.
  • Goi-mailako sarrera: Use the provided speaker-level input harness to connect directly to your vehicle's speaker wires. This is ideal for factory head units without RCA outputs.

Figure 4.3: Top panel of the subwoofer with input and control connections.

4.3 Remote Control Connection

Connect the wired remote control to the designated port on the subwoofer. Route the cable to a convenient location near the driver's seat for easy access to the bass level control.

Figure 4.4: Wired remote control for bass level adjustment.

5. Funtzionamendu-argibideak

Once installed and wired, you can adjust the subwoofer's settings for optimal performance.

5.1 Hasierako piztea

After all connections are made, reconnect the vehicle's negative battery terminal. Turn on your car's ignition and audio system. The subwoofer should power on, indicated by the power LED on the remote control (if connected) or on the unit itself.

5.2 Kontrolak doitzea

The WZ10US features several adjustable controls to fine-tune its output to your vehicle's acoustics and personal preference. These controls are typically located on the subwoofer's top panel (refer to Figure 4.3).

• Gain Control: Adjusts the input sensitivity of the subwoofer. Start with the gain at minimum and slowly increase it until the bass blends well with your main speakers without distortion.
• Pasabide baxuko iragazkia (LPF): Controls the upper frequency limit that the subwoofer will play. Frequencies above this setting will be filtered out. Adjust this between 40Hz and 150Hz to blend smoothly with your main speakers. A common starting point is 80Hz.
• Fase Aldaketa: Compensates for time alignment problems in the system. If the bass sounds weak or out of sync, try switching the phase between 0° and 180°. Choose the setting that provides the most impactful and cohesive bass.
• Baxu Boost: Increases the sound level of specific low frequencies (0 to 12 dB). Use this sparingly to add more punch to the bass. Excessive bass boost can lead to distortion.
• Urruneko maila kontrola: The wired remote allows you to conveniently adjust the overall bass volume from your listening position without accessing the subwoofer directly.

6. Mantentzea

The Gravity Warzone WZ10US subwoofer requires minimal maintenance.

• Garbiketa: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Do not use harsh chemicals, solvents, or abrasive cleaners.
• Konexioak: Aldian-aldian egiaztatu kableatu-konexio guztiak ondo finkatuta daudela eta korrosiorik gabe daudela ziurtatzeko.
• Aireztapena: Ensure that the area around the subwoofer remains clear of obstructions to allow for proper heat dissipation.

7. Arazoak

If you experience issues with your subwoofer, consult the following table before contacting support.

8. Zehaztapen Teknikoak

9. Bermea eta bezeroarentzako laguntza

The Gravity Warzone WZ10US subwoofer comes with a Berme mugatua. Specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For Technical Support or Warranty Claims:

Please contact the retailer where you purchased the product or visit the official Gravity website for contact information and support resources. When contacting support, please have your product model number (WZ10US) and proof of purchase readily available.