Thermex ID 50 V Shadow Smart Vertical Water Heater User Manual

1. Sarrera

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Thermex ID 50 V Shadow Smart vertical electric water heater. Please read these instructions thoroughly before installation and use, and retain them for future reference. This appliance is designed to provide hot water for domestic use.

2. Segurtasun informazioa

Garrantzitsua: Installation, maintenance, and repair must be performed by qualified personnel in accordance with local regulations and standards. Failure to comply with these instructions may result in property damage, personal injury, or death.

• Ensure the electrical supply matches the specifications of the water heater (230V, 2000W).
• Aparatuak behar bezala lurrarekin egon behar du.
• Ez jarri ur-berogailua martxan hondatuta edo gaizki funtzionatzen badu.
• Never block the pressure relief valve.
• Mantendu material sukoiak ur-berogailutik urrun.
• Deskonektatu korrontea mantentze-lan edo garbiketa egin aurretik.
• This appliance is equipped with frost protection. However, in areas prone to freezing, additional measures may be necessary if the appliance is not in continuous use.

3. Paketearen edukia

Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela:

• Thermex ID 50 V Shadow Smart Electric Water Heater
• Elikatze kablea entxufearekin
• 3-in-1 Safety Group (includes drain valve, check valve, and pressure relief valve)
• Wall anchors (1 set)
• Argibide eskuliburua (dokumentu hau)

4. Produktua amaitu daview

The Thermex ID 50 V Shadow Smart water heater features a flat, vertical design with a black finish, making it suitable for various installations. It incorporates a digital display and intelligent control modes for efficient operation.

1. irudia: Aurrealdea view of the Thermex ID 50 V Shadow Smart water heater, displaying the digital control panel and water connections at the bottom.

2. irudia: Aldea view illustrating the slim profile and vertical mounting bracket of the water heater.

3. Irudia: Atzealdea view of the water heater, highlighting the secure mounting points.

4. irudia: Xehetasuna view of the digital control panel, displaying temperature and operational modes.

5. Irudia: Behea view showing the hot (red) and cold (blue) water connections.

5. Konfigurazioa eta instalazioa

Professional installation by a certified plumber and electrician is strongly recommended to ensure safety and compliance with all local codes.

5.1 Muntaketa

• Select a suitable vertical wall location that can support the weight of the water heater when full (approx. 19 kg empty + 43 kg water = 62 kg).
• Ensure adequate clearance around the unit for maintenance and air circulation.
• Use the provided wall anchors to securely mount the water heater.

5.2 Iturgintza-konexioak

• Connect the cold water inlet (blue connection) to your main cold water supply.
• Install the 3-in-1 safety group on the cold water inlet line. This group includes a drain valve, check valve, and pressure relief valve. Ensure it is installed correctly to prevent backflow and overpressure.
• Connect the hot water outlet (red connection) to your hot water distribution system.
• Once connections are made, slowly open the cold water supply valve to fill the tank. Open a hot water tap in your home to allow air to escape until water flows steadily.
• Egiaztatu konexio guztiak ihesak daudenik.

5.3 Konexio elektrikoa

• Ensure the power supply is off at the main breaker before connecting the appliance.
• Connect the water heater's power cable to a dedicated, properly grounded electrical outlet.
• The electrical circuit should be protected by an appropriate circuit breaker (10 Amp gomendagarria).

6. Funtzionamendu-argibideak

6.1 Piztu/Itzali

After successful installation and filling the tank with water, switch on the electrical supply. Press the 'On/Off' button on the control panel to activate the water heater.

6.2 Tenperatura Kontrola

Use the 'Temperature control' up and down arrows on the control panel to set your desired water temperature. The current temperature will be displayed on the digital screen. The maximum temperature setting is 65 degrees Celsius.

6.3 Berokuntza moduak

The water heater offers several heating modes, accessible via the 'Heating mode' button:

• Turbo: Provides rapid heating for quick hot water availability.
• Optimoa: Balances heating speed and energy efficiency.
• Ekonomia: Prioritizes energy saving by heating water to a lower, but still comfortable, temperature.
• Smart: Activates the intelligent learning function.

7. Smart Mode Functionality

The 'SMART' mode is designed to optimize energy consumption based on your hot water usage patterns. When activated, the water heater monitors your hot water consumption over a 7-day cycle. It then anticipates future demand, heating water only when needed. During periods of low demand, the water is maintained at a minimum temperature to save energy while ensuring comfort.

8. Mantentzea

Mantentze-lan erregularrak zure ur-berogailuaren iraupena eta funtzionamendu eraginkorra bermatzen ditu.

• Anodoen ikuskapena: The BIO-glasslined tanks are equipped with two anodes for enhanced corrosion protection. These anodes should be inspected and replaced by a qualified technician periodically, typically every 1-2 years, depending on water quality.
• Presioa Arintzeko Balbula: Manually operate the pressure relief valve on the safety group at least once a year to ensure it is not blocked. Follow the manufacturer's instructions for the safety group.
• Depositua hustutzea: If the water heater will be out of use for an extended period or if there is a risk of freezing, drain the tank completely. Refer to the safety group instructions for draining procedures.
• Garbiketa: Garbitu ur-berogailuaren kanpoaldea oihal leun eta lehor batekinamp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.

9. Arazoak

The Thermex ID 50 V Shadow Smart features self-diagnosis capabilities. If an error occurs, a code may be displayed on the control panel. Refer to the specific error code table in the full manual (if provided separately) or contact customer support.

• Ur beroa ez: Check power supply, circuit breaker, and ensure the unit is turned on. Verify temperature setting.
• Insufficient Hot Water: Adjust temperature setting, check if 'Economy' mode is active, or if 'SMART' mode is still learning your usage patterns.
• Isurketak: Immediately turn off water supply and power. Inspect connections. Contact a qualified plumber if the leak persists.
• Ezohiko zaratak: This could indicate sediment buildup or other internal issues. Contact a qualified technician.

Potentzia bat izanez gerotage, the appliance will remember its last settings.

10. Zehaztapen Teknikoak

11. Bermea eta Laguntza

Your Thermex ID 50 V Shadow Smart water heater comes with the following warranty:

• Appliance Warranty: 2 urte
• Deposituaren bermea: 5 urte
• Ordezko piezen erabilgarritasuna: 10 urte

For warranty claims, technical support, or service, please contact your retailer or the authorized Thermex service center. Ensure you have your proof of purchase and the model number (ID 50 V Shadow) available.