OnLyee Projection Alarm Clock Model CR1001F User Manual

1. Produktua amaitu daview

The OnLyee Projection Alarm Clock Model CR1001F is a versatile digital alarm clock designed to enhance your bedroom experience. It features an ultra-clear LED display, dual alarms with snooze, a 180° rotatable time projector, adjustable brightness for both the display and projection, a USB charging port, and battery backup for settings retention.

Image: OnLyee Projection Alarm Clock with time projected and a phone charging.

2. Paketearen edukia

Paketea irekitzean, ziurtatu elementu guztiak bertan daudela:

• OnLyee Projection Alarm Clock
• Elikatze-moldagailua
• Erabiltzailearen eskuliburua (dokumentu hau)

Image: The alarm clock with its power adapter and user manual.

3. Produktuen diagrama

Familiarize yourself with the buttons and ports on your alarm clock for easy operation.

Image: Back and top view of the alarm clock with labeled buttons and ports.

1. SET TIME / 12/24H Button: Set time, switch 12/24 hour format.
2. ORDU botoia: Adjust hour during time setting.
3. MIN botoia: Adjust minute during time setting.
4. ILUNGAILUA botoia: Doitu pantailaren distira.
5. DST Button: Activate/deactivate Daylight Saving Time.
6. SNOOZE OK/* Button: Snooze alarm, confirm settings, adjust projection brightness.
7. ALARM1 / ALARM2 Buttons: Set Alarm 1 and Alarm 2.
8. ALARM ON/PAUSE Button: Turn alarm on/off.
9. PROJECTION ON/OFF Button: Turn projection on/off.
10. PROJECTION DIMMER: Adjust projection brightness.
11. ROTATE CLARITY: Focus ring for projection.
12. USB kargatzeko ataka: Kanpoko gailuak kargatzeko.
13. DC Jack: Potentzia sarrera.
14. Bateriaren konpartimendua: For backup batteries.

4. Konfigurazioa

4.1 Energia-konexioa

Connect the provided AC power adapter (100-240V) to the DC Jack on the back of the alarm clock. Plug the adapter into a standard wall outlet. The display will illuminate.

4.2 Bateriaren babeskopia

Install 2 AAA batteries (not included) into the battery compartment on the bottom of the clock. These batteries serve as a backup for your time and alarm settings during a power outage. The display will go blank during a power outage, but the alarm settings will be retained and the alarm will still sound.

Image: Illustration of battery backup functionality during power loss.

5. Oinarrizko Eragiketak

5.1 Setting Time (12/24H Format)

1. Luze sakatu SET TIME / 12/24H botoia ordua ezartzeko moduan sartzeko. Orduko digituak keinuka hasiko dira.
2. Sakatu ORDUA botoia ordua doitzeko.
3. Sakatu MIN botoia minutua doitzeko.
4. Sakatu laburra SET TIME / 12/24H button to switch between 12-hour and 24-hour display formats.
5. Sakatu SET TIME / 12/24H button again to confirm and exit time setting.

5.2 Udako Ordutegia (UdG)

Sakatu laburra DST button to activate or deactivate Daylight Saving Time. The display will adjust by one hour accordingly.

5.3 Display Brightness (5-Level Dimmer)

Sakatu laburra DIMMER button to cycle through 5 levels of display brightness (100%, 75%, 50%, 25%, 5%). Choose the level that suits your preference.

Image: Visual representation of the 5-level adjustable display brightness.

6. Alarma-funtzioak

6.1 Alarma bikoitzak ezartzea

The clock supports two independent alarms (ALARM1 and ALARM2).

1. Prentsa luzea ALARM1 or ALARM2 button to enter alarm setting mode. The hour digits will flash.
2. Sakatu ORDUA botoia alarma ordua doitzeko.
3. Sakatu MIN botoia alarma minutua doitzeko.
4. Sakatu ALARM1 or ALARM2 again to confirm and exit alarm setting.

6.2 Activating/Deactivating Alarms

Sakatu laburra ALARMA AKTITU/PAUSA button to toggle Alarm 1 or Alarm 2 on/off. An alarm icon will appear on the display when active.

6.3 Snooze funtzioa

When an alarm sounds, short press the large SNOOZE OK/* button on top to activate snooze. The alarm will pause for 9 minutes and then sound again.

Image: Using the snooze function for an additional 9 minutes of sleep.

6.4 Alarma bolumena

The alarm volume can be adjusted. Refer to the product diagram for the volume control buttons, typically located on the side or back. There are 5 adjustable volume levels.

Video: Demonstrates setting the alarm volume on a similar projection clock.

7. Projection Features

The OnLyee Projection Alarm Clock allows you to project the time onto your ceiling or wall.

7.1 Activating Projection

Sakatu laburra PROIEKZIOA ON / OFF botoia proiekzioa piztu edo itzaltzeko.

7.2 Adjusting Projection Angle

The projector can be rotated 180° to direct the time display to your desired surface (ceiling or wall).

Image: The alarm clock projecting time on a wall, highlighting the 180° flip feature.

7.3 Adjusting Projection Clarity (Focus Ring)

Biratu ROTATE CLARITY ring on the projector to achieve a clear and sharp time image on the projection surface. The optimal projection distance is 1.64-11.4 feet (0.5-3 meters).

7.4 Proiekzio-Distira

Sakatu laburra SNOOZE OK/* button to adjust the projection brightness. There are 5 levels of brightness for the projected time.

Video: Demonstrates the projection feature and how the time is displayed on the wall or ceiling.

8. USB kargatzeko ataka

The alarm clock includes a USB charging port (5V/1A) on the back. You can use this port to charge your mobile phone, tablet, or other electronic devices, eliminating the need for an extra wall adapter.

Image: A smartphone connected to the alarm clock's USB port for charging.

9. Mantentze-lanak eta zainketa

• Garbitu erlojua zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Mantendu gailua uretatik eta hezetasun handietatik urrun.
• Saihestu erlojua eguzki-argiaren edo tenperatura altuen eraginpean jartzea.
• Ensure the projector lens is clean for optimal clarity.

10. Arazoak

No display/Clock not turning on:

Ensure the power adapter is securely connected to the clock and a working power outlet.

Projection is blurry:

Adjust the 'ROTATE CLARITY' focus ring on the projector until the image is sharp.

Alarma ez da jotzen:

Check if Alarm 1 or Alarm 2 is activated (icon visible on display). Ensure the alarm volume is not set to minimum.

Ezarpenak galdu dira energia itzaltzeantage:

Verify that 2 AAA backup batteries are correctly installed in the battery compartment.

11. Zehaztapenak

Image: Product dimensions of the alarm clock.

12. Bermea eta laguntza

OnLyee provides a one-year warranty for this product. For any issues or support needs, please refer to the contact information provided in your product packaging or visit the official OnLyee website. We offer 30 days unconditional refund/exchange and 24-hour response for customer inquiries.