LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3 Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3. This device allows you to split a single digital optical audio source to three output devices simultaneously, enhancing your audio setup flexibility. Please read this manual thoroughly before use to ensure proper functionality and safety.

Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 1x LiNKFOR Digital Audio Splitter SPDIF/Toslink 1x3
• 1x Optical Cable (1 meter)
• 1x USB kable elektrikoa
• 1x Erabiltzailearen eskuliburua

Produktuaren Ezaugarriak

• 1x3 Optical Audio Splitter: Divides one digital optical Toslink source to three output devices.
• Onartutako audio formatuak: Compatible with LPCM2.0, DTS, and Dolby-AC3. Note: Does not support 7.1CH Dolby Digital Plus / Dolby TrueHD.
• Lossless & Long-Distance Transmission: Supports signal transmission up to 25 meters (82 feet) with minimal signal loss (<0.2dB/m) via fiber optic cable.
• Interferentziaren aurkako diseinua: Aluminiozko aleazio casing ensures good anti-interference performance and heat dissipation.
• LED adierazlea: Provides clear operational status.
• Overboltage Babesa: Prevents damage to the splitter.
• Bateragarritasun zabala: Works with PS3, STB, Xbox, DVD players, Blu-ray players, HDTVs, and power ampigogailuak.

Produktua amaituview

Familiarize yourself with the ports and indicators on your LiNKFOR Digital Audio Splitter.

• Micro USB / DC 5V: Energia sarrerako ataka.
• LEDa: Power/Status indicator.
• IN: Toslink optical audio input port.
• OUT1, OUT2, OUT3: Toslink optical audio output ports.

Konfigurazio Argibideak

Follow these steps to connect your LiNKFOR Digital Audio Splitter:

1. Konektatu iturria: Use a Toslink optical cable to connect your digital audio source (e.g., TV, PS3, Xbox, Blu-ray player) to the IN port on the splitter.
2. Konektatu irteerako gailuak: Use up to three Toslink optical cables to connect your audio receiving devices (e.g., soundbar, amplifier, headphones with optical input, Bluetooth optical transmitter, DAC audio converter) to the IRTEERA1, IRTEERA2, eta IRTEERA3 ports on the splitter.
3. Piztu: Connect the provided USB power cable to the DC 5V or Mikro USBa port on the splitter and then to a 5V USB power adapter (not included) or a USB port on your source device. The LED indicator will illuminate when power is supplied.
4. Egiaztatu konexioa: Ensure all cables are securely connected. Power on all connected devices.

Funtzionamendu-argibideak

Once the splitter is set up, operation is straightforward:

• Ensure all devices (source, splitter, and output devices) are powered on.
• The splitter will automatically distribute the digital optical audio signal from the input source to all three connected output devices.
• Adjust the volume on your individual output devices as needed.
• The LED indicator on the splitter will remain lit, indicating proper power supply and operation.

Mantentzea

To ensure the longevity and optimal performance of your LiNKFOR Digital Audio Splitter, follow these maintenance guidelines:

• Keep the device in a cool, dry place, away from direct sunlight, heat sources, and moisture.
• Garbitu gailua zapi leun eta lehor batekin. Ez erabili garbitzaile likido edo aerosolik.
• Avoid placing heavy objects on top of the splitter.
• Do not attempt to open or repair the device yourself. Refer to qualified service personnel for any repairs.
• Denbora luzez erabiltzen ez duzunean, deskonektatu korronte-egokitzailea.

Arazoak konpontzea

If you encounter issues with your splitter, please refer to the following common problems and solutions:

Zehaztapenak

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LiNKFOR webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.