Risco Vupoint POE IP Kameraren Erabiltzaile Eskuliburua

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Risco Vupoint POE IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Produktua amaituview

The Risco Vupoint POE IP Camera is a high-resolution surveillance camera designed for robust security applications. It features Power over Ethernet (PoE) for simplified installation, a 4 Megapixel sensor for clear imaging, and advanced night vision capabilities.

Figure 1: Risco Vupoint POE IP Camera. This image shows a white cylindrical camera with a black lens housing and a circular mounting base. The 'RISCO' logo is visible on the side of the camera body.

Paketearen edukia

Egiaztatu osagai guztiak paketean daudela:

• 1 x Risco Vupoint POE IP Camera (Model: RVCM52P2200A)
• Muntatzeko hardwarea (torlojuak, aingurak)
• Hasierako gida azkarra

2. Segurtasun informazioa

Produktuari kalterik ez egiteko edo zeure buruari lesiorik ez egiteko, jarraitu segurtasun neurri hauek:

• Ensure the power source meets the camera's requirements (PoE).
• Do not expose the camera to extreme temperatures or humidity beyond its IP67 rating.
• Avoid direct exposure of the lens to strong light sources.
• Ez saiatu kamera desmuntatzen edo aldatzen. Mantendu konponketa guztiak langile kualifikatuen esku.
• Install the camera securely to prevent it from falling.

3. Konfigurazioa eta instalazioa

Instalazio fisikoa

The Risco Vupoint POE IP Camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1.06 kg / 2.34 lbs).

1. Choose a suitable location that provides the desired field of view and is within range of your network cable.
2. Use the provided mounting template (if applicable) to mark drill holes on the wall or ceiling.
3. Beharrezkoa bada, zuloak egin eta hormako aingurak sartu.
4. Secure the camera's mounting base to the surface using the provided screws.
5. Egokitu kameraren angelua estaldura optimoa lortzeko.

Sare-konexioa (PoE)

This camera supports Power over Ethernet (PoE), simplifying wiring by delivering both power and data over a single Ethernet cable.

1. Konektatu Ethernet kablearen mutur bat kameraren RJ45 atakara.
2. Connect the other end of the Ethernet cable to a PoE-enabled switch or PoE injector.
3. Ensure your network is configured to provide IP addresses via DHCP or assign a static IP address to the camera if required by your system.

Hasierako Konfigurazioa

The camera is designed for Plug and Play installation with Risco systems. For integration with Risco Cloud™, Agility™ v3.59+, LightSYS™ v2.52+, or ProSYS™ Plus systems, follow the specific integration steps provided by Risco for your security panel.

• Risco NVR/License Requirement: Connection is mandatory via a Risco NVR, or a specific license may be required for full functionality and cloud connectivity.
• ONVIF bateragarritasuna: The camera supports ONVIF protocol for integration with compatible third-party NVRs or video management systems. Refer to your NVR's manual for ONVIF device discovery and addition.
• SD txartelaren zirrikitua: Insert a compatible microSD card (not included) into the camera's SD card slot for local storage of video recordings.

4. Kameraren funtzionamendua

Zuzenean View eta Grabaketa

Access the live video feed and manage recordings through your connected Risco security system's interface (e.g., Risco Cloud, NVR) or a compatible ONVIF client.

• Ebazpena: The camera provides a 4 Megapixel effective video resolution. Recording resolution may be set to 1080p depending on system configuration.
• Gaueko ikuspegia: The camera features advanced night vision with a range of up to 50 meters, automatically activating in low-light conditions.
• Mugimendu-detekzioa: Configure motion detection zones and sensitivity settings via your connected system for event-triggered recording and alerts.

Hodeiko Konektibitatea

For remote access and cloud-based features, ensure your camera is properly linked to your Risco Cloud account via a compatible Risco NVR or security panel.

5. Mantentzea

Garbiketa

To maintain optimal image quality, periodically clean the camera lens and housing.

• Erabili zapi leun eta lehor bat kameraren gorputza garbitzeko.
• For the lens, use a lens cleaning cloth and a specialized lens cleaning solution. Do not use abrasive cleaners.

Firmware eguneraketak

Periodically check for firmware updates through your Risco system or Risco's official website. Firmware updates can improve performance, add new features, and enhance security.

6. Arazoak

If you encounter issues with your Risco Vupoint POE IP Camera, refer to the following common problems and solutions:

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Risco webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.

Risco Ofiziala Webgunea: www.riscogroup.com