1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Ezaugarri nagusiak
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Beira tenplatuko alboko panela: A 4mm thick tempered glass side panel provides a clear view zure barne osagaien.
- Extensive Radiator Support: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Plakaren bateragarritasuna: ATX, Micro-ATX eta Mini-ITX plaka baseak onartzen ditu.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Konfigurazioa eta instalazioa
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Hozte-sistemaren konfigurazioa
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Aurrealdea: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Goia: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- Atzekoa: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Elikatze hornidura estalkia: 2 x 120 mm-ko haizagailu onartzen ditu.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Osagaien instalazioa
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Plaka nagusia: Supports ATX motherboards (up to 305mm x 275mm).
- CPU hozgailua: Maximum height of 170mm.
- Txartel grafikoa (GPU): Maximum length of 340mm.
- Elikatze-iturria (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Biltegiratzea: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
7. irudia: Barneko bat view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
1. bideoa: Ofizialki amaitu daview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Funtzionamendu-argibideak
3.1 I/O Panel Functions
The top I/O panel provides convenient access to essential controls and ports.
- Pizteko botoia: Sistema pizten edo itzaltzen du.
- LED kontrol botoia: Cycles through various ARGB lighting modes for the included fans.
- Berrezarri botoia: Sistema berrabiarazten du.
- USB 3.0 portuak (x2): Abiadura handiko datuak transferitzeko.
- MIC/HD-AUDIO Jacks: For connecting headphones and microphones.
8. irudia: Xehetasuna view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 ARGB haizagailuaren kontrola
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Plaka basearen sinkronizazioa: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasing its vibrant ARGB lighting capabilities.
4. Mantentzea
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Hauts-iragazkiak: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Kanpoaldea: Garbitu kanpoko gainazalak leun batekin, damp oihal. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Beira tenplatuko panela: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- Barne garbiketa: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Arazoak
This section addresses common issues you might encounter with your Antec NX700 case.
5.1 Fans Not Spinning or Lighting Up
- Potentzia-konexioa: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- ARGB konexioa: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Plaka basearen softwarea: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Aurreko paneleko konektoreak: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Zehaztapenak
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | Antek |
| Seriea | NX700 |
| Ereduaren izena | NX700 |
| Elementuaren eredu-zenbakia | 0-761345-81072-2 |
| Kasu mota | Mid dorrea |
| Plaka amaren bateragarritasuna | ATX, Mikro-ATX, Mini-ITX |
| Materiala | SPCC + Plastic, Tempered Glass |
| Produktuaren neurriak (LxWxH) | 17.32 x 8.66 x 19.37 hazbete (440 x 220 x 492 mm) |
| Elementuaren pisua | 15.84 libra (7.2 kilogramo) |
| Zaleak barne | 2 x 185mm ARGB (Front), 1 x 120mm ARGB (Rear) |
| Aurrealdeko Fan euskarria | 3 x 120 mm / 3 x 140 mm / 2 x 185 mm |
| Top Fan Support | 2 x 120 mm / 2 x 140 mm |
| Rear Fan Support | 1 x 120 mm / 1 x 140 mm |
| PSU Shroud Fan Support | 2 x 120 mm |
| Aurreko erradiadorearen euskarria | Gehienez 360 mm |
| Goiko erradiadorearen euskarria | Gehienez 280 mm |
| Atzeko erradiadorearen euskarria | Gehienez 140 mm |
| CPU hozgailuaren gehienezko altuera | 170 mm |
| GPUaren gehienezko luzera | 340 mm |
| PSUaren gehienezko luzera | 200mm (with HDD) / 365mm (without HDD) |
| Drive Bays | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| I/O panela | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
11. Irudia: Atzealdea view of the Antec NX700, showing expansion slots and fan mount.
7. Bermea eta Laguntza
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Antec Official Webgunea: www.antec.com
