mDesign Metal Curved Desk Lamp (Model 18875MDHS) User Manual

1. Sarrera

This manual provides essential instructions for the safe and efficient use of your mDesign Metal Curved Desk Lamp, Model 18875MDHS. Please read this manual thoroughly before assembly and operation, and retain it for future reference. This lamp is designed for indoor use only and is suitable for various settings such as home offices, bedrooms, and living rooms.

Segurtasun informazio garrantzitsua

• Always disconnect the power supply before cleaning or replacing the light bulb.
• Ez erabili l hauamp with a dimmer switch unless specifically rated for it.
• Ziurtatu lamp gainazal egonkor eta lau batean jartzen da, iraultzea saihesteko.
• Saihestu lamp hezetasunera edo muturreko tenperaturetara.
• Erabili zehaztutako bonbilla mota eta wat bakarriktage gehiegi berotzea eta kalteak saihesteko.
• Keep the power cord away from heat sources, sharp edges, and wet areas.

2. Paketearen edukia

Please check the package carefully to ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

• Lamp Base with Power Cord and In-line Switch
• Lamp Besoa
• Lamp Itzala
• Mounting Hardware (if applicable for assembly)

2.1. irudia: Amaituview of the mDesign Metal Curved Desk Lamp. This image shows the assembled lamp, which consists of a base, a curved arm, and a conical shade.

3. Konfigurazioa eta Muntaketa

Follow these steps to assemble your desk lamp:

1. Deskonprimitu osagaiak: Carefully remove all parts from the packaging. Place them on a clean, flat, and stable surface.
2. Bildu Lamp Base and Arm: Erantsi lamp besoa lamp base. Ensure it is securely tightened to prevent wobbling. (Note: Some models may have pre-assembled bases and arms. If you encounter loose wiring, ensure connections are secure before proceeding, or contact support.)
3. Erantsi Lamp Itzala: Seguru lamp itzala l goialderaamp besoa.
4. Bonbilla instalatu:
   • Ziurtatu lamp entxufetik deskonektatuta dago.
   • Screw a compatible light bulb into the lamp socket. Refer to the specifications section for bulb type and maximum wattage.
5. Kokatu Lamp: Jarri lamp on your desired surface, ensuring it is stable and the power cord can reach an outlet without being strained or obstructed.

3.1. irudia: This image illustrates the bulb requirements for the lamp. It clearly states "USES TYPE G BULBS MAXIMUM 40W".

4. Funtzionamendu-argibideak

Operating your mDesign Desk Lamp zuzena da:

1. Potentzia-konexioa: Entxufatu lampren elikatze-kablea entxufe elektriko estandar batera konektatu.
2. Piztu/Itzaltzea: Locate the in-line switch on the power cord. Press the switch to turn the lamp ON edo OFF.
3. L doitzeaamp Burua: Lamp head is designed to swivel, allowing you to direct the light as needed. Gently adjust the shade to your desired angle.

4.1. irudia: This image displays a close-up of the black in-line switch located on the power cord, used to turn the lamp piztu eta itzali.

4.2. irudia: This image demonstrates the adjustable nature of the lamp head, showing it swiveling to different positions to direct light.

5. Mantentzea

Garbiketa

• Deskonektatu beti lamp garbitu aurretik.
• Garbitu lamp's surface with a soft, dry cloth.
• Ez erabili garbitzaile, disolbatzaile edo leuntzeko agente urratzailerik, akabera kaltetu baitezakete.

Bonbilla ordezkatzea

• Ziurtatu lamp is unplugged and the bulb has cooled completely before attempting to replace it.
• Kontu handiz askatu bonbilla zaharra zorrotik.
• Screw in a new bulb of the correct type (E26 base, Type G) and wattage (maximum 40W).

6. Arazoak

Zure l-rekin arazoak badituzuamp, ikusi ondorengo arazoak konpontzeko gida:

7. Zehaztapenak

7.1. irudia: This image provides detailed measurements of the lamp, including height, width, depth, and cord length in both inches and centimeters.

8. Bermearen informazioa

Specific warranty details for the mDesign Metal Curved Desk Lamp (Model 18875MDHS) are not provided in this manual. For information regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact mDesign customer support directly.

9. Bezeroarentzako arreta

If you have any questions, require assistance with assembly, operation, or troubleshooting beyond the scope of this manual, please contact mDesign customer support. Contact information can typically be found on the product packaging or on the official mDesign webgunea.

For more information about mDesign products, visit: mDesign Store on Amazon