GEWISS P-COMFORT GWD6916 Wired Load Management Relay User Manual

1. Sarrera

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the GEWISS P-COMFORT GWD6916 Wired Load Management Relay. Please read this manual thoroughly before attempting any installation or operation.

The GEWISS P-COMFORT GWD6916 is designed to manage electrical loads in an installation, optimizing energy consumption and preventing overloads. It is a wired version, ensuring reliable communication and control.

Segurtasun Informazioa

• Instalazio profesionala: Installation and maintenance must be performed by qualified personnel in accordance with local electrical codes and regulations.
• Deskonektatu energia: Always disconnect the main power supply before performing any installation, wiring, or maintenance procedures.
• liburukiatage: Ziurtatu hornidura boltage matches the device's specifications (250 Volt).
• Ingurumen-baldintzak: Ez jarri gailua hezetasunean, tenperatura altuetan edo ingurune korrosiboetan.

2. Paketearen edukia

Egiaztatu elementu guztiak bertan daudela eta kalterik gabe daudela paketea irekitzean:

• 1 x GEWISS P-COMFORT GWD6916 Wired Load Management Relay
• 1 x Argibide eskuliburua (dokumentu hau)

1. irudia: Aurrealdea view of the GEWISS P-COMFORT GWD6916 Wired Load Management Relay. The image shows the compact housing, terminal blocks for wiring, and indicator lights.

3. Instalazioa

Follow these steps for proper installation of the GEWISS P-COMFORT GWD6916 relay.

3.1 Muntaketa

1. Aukeratu kokapena: Choose a suitable location within an electrical enclosure, ensuring adequate ventilation and protection from environmental factors.
2. Muntaketa: The relay is designed for DIN rail mounting. Securely attach the device to the DIN rail until it clicks into place.

3.2 Kableatua

Abisua: Ensure power is disconnected before proceeding with wiring.

1. Elikatze-iturria: Connect the main power supply (250 Volt) to the designated input terminals as indicated on the device's wiring diagram.
2. Karga konexioak: Connect the loads to be managed by the relay to the output terminals. Ensure correct polarity and current ratings are observed.
3. Kontrol-sarrera: Connect the control signal (e.g., from a master load management unit or energy meter) to the dedicated control input terminals. This signal dictates when loads should be shed or reconnected.
4. Lurreratzea: Ensure proper grounding of the device and associated electrical components.

Refer to the detailed wiring diagram printed on the device or included in the packaging for specific terminal assignments.

4. Funtzionamendua

Once installed and wired correctly, the GEWISS P-COMFORT GWD6916 relay operates automatically based on the control input it receives.

4.1 Power-Up and Initial Check

1. Berrezarri boterea: After completing all wiring and safety checks, restore power to the installation.
2. Adierazle argiak: Observe the indicator lights on the relay. A power indicator should illuminate, confirming the device is receiving power. Other indicators will show the status of the loads being managed.

4.2 Load Management Function

The relay functions by switching connected loads ON or OFF in response to a control signal. Typically, this signal originates from a central load management system that monitors total energy consumption. When the total consumption exceeds a predefined threshold, the control system signals the relay to disconnect non-essential loads (load shedding) to prevent an overload. When consumption drops, the loads are reconnected.

4.3 Egoera-adierazleak

The relay features LED indicators to provide visual feedback on its operational status:

• Power LED: Indicates that the device is powered ON.
• Egoera LED: May indicate operational status, errors, or communication status with the control unit. Refer to the device's specific documentation for LED behavior.
• Load Status LEDs: Individual LEDs may indicate the ON/OFF status of each controlled load.

5. Mantentzea

The GEWISS P-COMFORT GWD6916 relay is designed for reliable, long-term operation with minimal maintenance.

• Garbiketa: Aldian-aldian garbitu gailuaren kanpoaldea oihal leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Ikuskapena: Annually, or as required by local regulations, have a qualified electrician inspect the wiring connections for tightness and signs of wear or damage.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: Gailuak ez dauka erabiltzaileak konpondu dezakeen piezarik. Ez saiatu unitatea irekitzen edo konpontzen.

6. Arazoak

If you encounter issues with your GEWISS P-COMFORT GWD6916 relay, refer to the following common problems and solutions:

For issues not listed above or if troubleshooting steps do not resolve the problem, contact a qualified electrician or Gewiss technical support.

7. Zehaztapenak

8. Bermea eta Laguntza

The GEWISS P-COMFORT GWD6916 is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Gewiss webwebgunean bermearen baldintza zehatzak ikusteko.

For technical assistance, product inquiries, or warranty claims, please contact Gewiss customer support through their official channels. Ensure you have your product model number (GWD6916) and purchase details available when contacting support.

Gewiss Ofiziala Webgunea: www.gewiss.com