Norton Reserve A296 6" P120 Grit Aluminum Oxide Non-Vacuum Hook-and-Loop Discs User Manual

Produktua amaituview

This manual provides essential information for the safe and effective use of Norton Reserve A296 6" P120 Grit Aluminum Oxide Non-Vacuum Hook-and-Loop Discs. These discs are designed for various sanding applications, offering durability and consistent performance.

The Norton Reserve A296 sanding disc is a 6-inch diameter abrasive disc featuring P120 grit aluminum oxide. It utilizes a non-vacuum hook-and-loop attachment system, making it suitable for a wide range of sanding tasks. Each package contains 50 discs.

Konfigurazioa eta Instalazioa

Proper installation of the sanding disc is crucial for safety and optimal performance. These discs are designed for use with compatible sanding tools, such as angle grinders, that feature a hook-and-loop backing pad.

1. Inspect the Backing Pad: Ensure the hook-and-loop backing pad on your sanding tool is clean and free from debris. A worn or damaged pad may not securely hold the disc.
2. Align the Disc: Carefully align the Norton Reserve A296 sanding disc with the backing pad. The hook-and-loop system allows for easy attachment and removal.
3. Sakatu irmo: Press the disc firmly onto the backing pad, starting from the center and working outwards, to ensure full adhesion and prevent wobbling during operation.
4. Segurtasuna egiaztatu: Before starting the tool, gently pull on the edges of the disc to confirm it is securely attached and will not detach during use.

Oharra: Always refer to your power tool's instruction manual for specific safety guidelines and attachment procedures.

Funtzionamendu-argibideak

The Norton Reserve A296 P120 grit disc is suitable for medium sanding applications. Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, and a dust mask, when operating sanding tools.

• Azalera prestatzea: Ensure the workpiece is clean and securely clamped.
• Abiarazi tresna: Turn on your sanding tool before making contact with the workpiece.
• Presio uniformea ​​aplikatu: Move the sander smoothly and consistently across the surface, applying even, moderate pressure. Avoid excessive pressure, which can lead to premature disc wear or an uneven finish.
• Gainjarritako paseak: Overlap each pass by approximately one-third of the disc's width to ensure uniform material removal.
• Monitor Disc Wear: Replace the disc when it becomes dull or clogged to maintain sanding efficiency and quality.

Grit and Application Guide

The P120 grit of these discs is classified as a medium grit, ideal for preparing surfaces for painting, removing minor imperfections, or light stock removal. Refer to the following guides for optimal application.

Irudiaren deskribapena: This image displays two tables. The top table, "Material/Application-to-Product Recommendation Guide," suggests optimal Norton abrasive products (e.g., SG H920, Blaze A995, BlueFire H875P, Gold Reserve A296) for various materials and applications (Heavy-Medium Stock Removal, Light Stock Removal, Finishing). The bottom table, "Application/Grit Recommendation Guide," illustrates the range of grit numbers (from 36 to 1500) and their corresponding applications, from "Coarser (Grinding)" to "Finer (Finishing)," indicating that P120 grit falls within the "Intermediate to Finishing" range.

Mantentzea eta biltegiratzea

Proper maintenance and storage will extend the life and effectiveness of your Norton sanding discs.

• Garbitasuna: After use, remove the disc from the sander. If the disc is reusable (e.g., for light clogging), gently clean off any accumulated dust or debris.
• Ikuskapena: Regularly inspect discs for signs of wear, tears, or excessive clogging. Discard damaged or excessively worn discs to prevent poor performance or potential hazards.
• Biltegiratzea: Store unused discs in their original packaging or a clean, dry environment away from direct sunlight, extreme temperatures, and humidity. This helps prevent degradation of the abrasive and the hook-and-loop backing.
• Manipulazioa: Saihestu tolestura edo zimurtzeaasing the discs, as this can compromise their structural integrity and lead to uneven sanding.

Ohiko arazoak konpontzea

Produktuaren zehaztapenak

Irudiaren deskribapena: Gertu bat view of a single Norton Reserve A296 6-inch P120 Grit Aluminum Oxide Non-Vacuum Hook-and-Loop Sanding Disc. The disc is circular and features a uniform yellow-orange abrasive surface, indicating its P120 grit texture. The hook-and-loop backing is not visible in this view.

• Produktuaren izena: Norton Reserve A296 6" P120 Grit Aluminum Oxide Non-Vacuum Hook-and-Loop Discs
• Modelo zenbakia: 63642506234
• Marka: Norton
• Diskoaren diametroa: 6 hazbetekoa
• Harea mota: Aluminio oxidoa
• Ale zenbakia: P120 (Medium)
• Eranskin-sistema: Hook-and-Loop (Non-Vacuum)
• Gailu bateragarriak: Angle Grinder (and other compatible sanding tools)
• Pakete kopurua: 50 pieza
• Produktuaren neurriak: 7.1 x 6.6 x 0.05 inches (packaging); 6"L x 6"W (disc)
• Fabrikatzailea: Norton Abrasives
• Jatorrizko herrialdea: Kanadan egina

Bermea eta Laguntza

Specific warranty information for this product is not provided in the available documentation. For details regarding product warranty, returns, or technical support, please contact Norton Abrasives directly or refer to their official webgunea.

Fabrikatzailea: Norton Abrasives

Laguntza gehiago behar baduzu, bisitatu Norton Store on Amazon or the official Norton Abrasives webgunea.