Sarrera
This manual provides detailed instructions for the safe installation and operation of your Pipishell Full Motion TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact customer support.

Irudia: Gainetikview of Pipishell Full Motion TV Wall Mounts, models PIMFK3 and PILFK4, showing their articulating arm designs and TV mounting plates.
Segurtasun informazio garrantzitsua
OHARRA: Argibide hauek irakurri eta jarraitzen ez badituzu, lesio pertsonal larriak, ondasunen kalteak edo bermea baliogabetu egin daitezke.
- Do not install this product on drywall alone. It must be mounted to a solid wood stud, concrete wall, or brick wall.
- Ziurtatu horma-egiturak euskarriaren eta telebistaren pisu konbinatua segurtasunez eutsi dezakeela.
- Do not exceed the maximum weight capacity specified for each model: 99 lbs (45 kg) for PIMFK3 and 132 lbs (60 kg) for PILFK4.
- Always use an assistant for lifting and positioning the television.
- Torloju guztiak ondo estutu, baina ez gehiegi estutu. Gehiegi estutzeak torlojuak eta osagaiak kaltetu ditzake.
- Aldian-aldian egiaztatu konexio guztiak seguru daudela ziurtatzeko.
Paketearen edukia
Instalatu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela. Piezarik falta bada edo akastuna badago, jarri harremanetan Pipishell bezeroarentzako arreta-zerbitzuarekin.
Muntatzeko osagaiak:
- Hormako plakaren muntaketa
- Telebistarako euskarriak (2x)
- Mounting Hardware Kit (various screws, washers, spacers)
- Burbuila Maila
- Kable Loturak

Irudia: Xehetasun handikoa view of the PIMFK3 mount, highlighting the security lock, compression hinges, and strong dual arms. Also shows the maximum weight capacity of 99 lbs and TV size range of 26-55 inches.

Irudia: Xehetasun handikoa view of the PILFK4 mount, showcasing its six-arm structure, safety lock, extra-wide TV plate, and ultra-strong wall plate for heavy-duty support.
Beharrezko tresnak (ez daude barne)
- Arkatza
- Zutabeen bilatzailea (egurrezko habeen instalaziorako)
- Zulagailu elektrikoa
- Drill Bits (appropriate size for wall type and lag bolts)
- Giltza giltza edo giltza erregulagarria
- Phillips buru bihurkina
- Neurketa Zinta
Instalazio-baldintzak
Telebista bateragarritasuna:
- PIMFK3: Fits most 26-55 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 99 lbs (45 kg).
- PILFK4: Fits most 37-75 inch flat or curved LED, LCD, OLED TVs. Maximum weight capacity: 132 lbs (60 kg).
VESA bateragarritasuna:
This mount supports VESA patterns from 100x100mm up to 600x400mm. Measure the horizontal and vertical distance between the mounting holes on the back of your TV to determine its VESA pattern.
Horma motaren bateragarritasuna:
The mount is designed for installation on:
- Single Wood Studs (PIMFK3) or 16-inch Wood Studs (PILFK4)
- Hormigoizko horma sendoak
- Adreiluzko hormak
EZ muntatu pladur gainean bakarrik.

Image: Diagram illustrating VESA compatibility (Min 100mm, Max 400mm for PIMFK3) and suitable wall types: single wood stud, concrete wall, and brick wall.

Image: Diagram illustrating VESA compatibility (Max 600x400mm) and suitable wall types for PILFK4: 16-inch wood studs, concrete wall, and brick wall. A warning states: Do not mount on drywall alone.
Konfigurazioa eta Instalazioa
Step 1: Determine Mounting Location and Wall Type
- Use a stud finder to locate the center of a wood stud if installing on wood. Mark the stud edges.
- For concrete or brick walls, ensure the wall is solid and free of obstructions.
- Hold the wall plate against the wall at your desired height and use a pencil to mark the pilot hole locations. Use the included bubble level to ensure it is level.
2. urratsa: zulo pilotuak egin
- For wood studs: Drill pilot holes using a 7/32 inch (5.5mm) drill bit to a depth of 2.2 inches (55mm).
- For concrete/brick walls: Drill pilot holes using a 3/8 inch (10mm) masonry drill bit to a depth of 2.4 inches (60mm). Insert concrete anchors into the holes, ensuring they are flush with the wall surface.
3. urratsa: Lotu hormako plaka horman
- Lerrokatu hormako plaka zuloekin.
- Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly with a socket wrench.
4. urratsa: Lotu telebistarako euskarriak telebistari
- Lay your TV face down on a soft, clean surface.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use the provided spacers if the TV back is uneven or if screws are too long.
- Attach the two TV brackets to the back of your TV using the chosen screws and washers. Ensure the brackets are centered and level.
5. urratsa: Telebista hormako plakan muntatu
- With an assistant, carefully lift the TV and hook the TV brackets onto the wall plate.
- Ziurtatu telebista hormako euskarrian ondo finkatuta dagoela.
- Engage the safety locks on the bottom of the TV brackets to prevent accidental dislodging.
Funtzionamendua eta doikuntzak
Your Pipishell Full Motion TV Wall Mount allows for various adjustments to optimize your viewesperientzia.
Inklinazio doikuntza:
The mount allows for a tilt range of -15° to +5° (PIMFK3) or -15° to +5° (PILFK4). Loosen the tilt adjustment knobs on the TV brackets, adjust the TV to the desired angle, and then re-tighten the knobs to secure the position.
Birako doikuntza:
The articulating arm allows the TV to swivel up to 90° left or right (PIMFK3) or 120° (PILFK4), depending on TV size and wall distance. Gently push or pull the TV to the desired viewangelua.
Mailaren doikuntza:
After installation, you can adjust the TV's level by ±3°. Loosen the leveling screws on the TV brackets, adjust the TV to be perfectly level, and then re-tighten the screws.
Luzapena eta atzerakada:
The mount can extend the TV away from the wall up to 19.5 inches (PIMFK3) or 16 inches (PILFK4) and retract it to a minimum distance of 3.2 inches (PIMFK3) or 3.1 inches (PILFK4) from the wall. Gently pull or push the TV to adjust the distance.

Image: Demonstrates the PIMFK3 mount's ability to pull out to 19.5 inches, tilt ±5° for anti-glaring, swivel ±90°, and level ±3° for an optimal viewesperientzia.

Image: Illustrates the PILFK4 mount's tilt range from -15° to +5° and level adjustment of ±3° for fine-tuning the TV's position after installation.

Image: Shows the PILFK4 mount's swivel capability of 120° and its ability to retract to 3.1 inches and extend up to 16 inches from the wall, allowing for flexible viewing positions and space saving.
Mantentzea
- Periodically check that all screws and connections are secure. Re-tighten if necessary.
- Garbitu euskarria zapi leun eta lehor batekin. Saihestu garbitzaile edo disolbatzaile urratzaileak.
- Ensure cables are properly managed and not pinched by moving parts of the mount. Use the provided cable ties to keep cables tidy.
Arazoak konpontzea
Telebista ez dago maila berean instalatu ondoren:
Loosen the level adjustment screws on the TV brackets, adjust the TV to the desired level using a bubble level, and then re-tighten the screws.
Euskarriak solte sentitzen du horman:
Immediately remove the TV from the mount. Check that all lag bolts securing the wall plate to the wall are fully tightened. If the wall material is damaged, consult a professional for repair before re-mounting.
Difficulty adjusting tilt or swivel:
Ensure that the tilt adjustment knobs are sufficiently loosened before attempting to adjust the tilt. For swivel, ensure no cables are snagged or preventing movement. Do not force adjustments.
Falta diren piezak:
Refer to the 'Package Contents' section. If any parts are missing, contact Pipishell customer support for assistance.
Zehaztapenak
| Ezaugarri | PIMFK3 | PILFK4 |
|---|---|---|
| Telebistako Tamainen Barrutia | 26 - 55 hazbete | 37 - 75 hazbete |
| Gehienezko pisu-gaitasuna | 99 lb (45 kg) | 132 lb (60 kg) |
| VESA bateragarritasuna | 100x100mm-tik 400x400mm-ra | 200x100mm-tik 600x400mm-ra |
| Inklinazio angelua | -15°-tik +5°-ra | -15°-tik +5°-ra |
| Angelu birakaria | Up to ±90° | Up to ±120° |
| Mailaren Doikuntza | ±3° | ±3° |
| Hormarekiko distantzia (erretiratuta) | 3.2 hazbetekoa | 3.1 hazbetekoa |
| Hormarekiko distantzia (hedatua) | 19.5 hazbetekoa | 16 hazbetekoa |
| Materiala | Altzairu aleazioa | |
| Kolorea | Beltza | |
Bermea eta Bezeroarentzako Arreta
Pipishell products are manufactured with quality and care. For warranty information or technical assistance, please contact Pipishell customer support through the retailer's platform or the official Pipishell webgunea.
Please have your product model number (PIMFK3 or PILFK4) and purchase date available when contacting support.





