SENSEA Extensible Shower Curtain Rod

Sarrera

Thank you for choosing the SENSEA Extensible Shower Curtain Rod. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new shower rod. Please read these instructions carefully before use and retain them for future reference.

Segurtasun Informazioa

• Ensure the rod is securely installed between two stable surfaces.
• Do not hang excessive weight on the rod, as this may cause it to fall and result in injury or damage.
• Mantendu haurren eskura.
• Regularly check the rod's stability to ensure it remains firmly in place.

Paketearen edukia

Your SENSEA Extensible Shower Curtain Rod package should contain:

• 1 x SENSEA Extensible Shower Curtain Rod (Black Aluminum)

Note: Shower curtain and hooks are not included.

Konfigurazioa eta Instalazioa

The SENSEA extensible shower curtain rod is designed for quick and easy installation without the need for drilling or tools, thanks to its integrated spring mechanism. It adapts perfectly to your wall width without causing damage.

1. irudia: The SENSEA shower curtain rod, illustrating its no-drill installation and adjustable length range of 1.20 meters to 2.20 meters.

1. Neurtu espazioa: Determine the desired width for your shower curtain rod. The rod is adjustable from 120 cm to 220 cm.
2. Extend the Rod: Hold the rod with both hands. Twist one end of the rod to unlock the extension mechanism. Gently pull the rod to extend it slightly beyond the measured width of your installation area (approximately 2-3 cm longer).
3. Kokatu haga: Place one end of the rod against one wall at the desired height. Compress the rod slightly by pushing the other end against the opposite wall.
4. Lekuan seguru: Once positioned, release the pressure. The internal spring mechanism will exert tension, holding the rod firmly between the two walls. Ensure the rod is level and stable.
5. Azken egiaztapena: Gently tug on the rod to confirm it is securely installed and will not slip.

2. irudia: Detail of the rod's end cap, designed for secure, non-slip contact with wall surfaces.

Funtzionamendu-argibideak

Once the SENSEA shower curtain rod is securely installed, its operation is straightforward:

1. Hang Your Curtain: Attach your shower curtain to the rod using appropriate shower curtain hooks or rings.
2. Adjust Curtain Position: Slide the shower curtain along the rod as needed to open or close your shower area.

3. irudia: A shower curtain properly hung on the rod, demonstrating typical use.

Mantentzea

To ensure the longevity and appearance of your SENSEA shower curtain rod, follow these simple maintenance guidelines:

• Garbiketa: Wipe the rod regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
• Ikuskapena: Periodically check the rod for any signs of wear or damage. Ensure the end caps are intact and the rod remains securely tensioned between the walls.
• Herdoilaren prebentzioa: The aluminum construction is designed to resist rust, but wiping it dry after showering can help maintain its condition, especially in high-humidity environments.

Arazoak konpontzea

Zehaztapenak

• Marka: Sensea
• Modelo zenbakia: 3276000702214
• Mota: Extensible Shower Curtain Rod
• Materiala: Aluminioa
• Kolorea: Beltza
• Luzera erregulagarria: 120 cm eta 220 cm (47.2 hazbete eta 86.6 hazbete)
• Instalazio mota: Wall-mounted (tension-based, no drilling required)
• Produktuaren neurriak (L x W x H): Approximately 130 x 10 x 6 cm (collapsed); 200 grams

Laguntza eta Bermea

SENSEA products are designed for reliability and to meet your needs. For any questions or assistance regarding your shower curtain rod, please refer to the retailer where you purchased the product or visit the official SENSEA webbezeroarentzako laguntza-informaziorako gunea.

Ez da ordezko piezen eskuragarritasunari buruzko informaziorik ematen.