Whadda WPK05 I/O Module Instruction Manual

Sarrera

The Whadda WPK05 I/O module is a versatile, stackable shield designed to expand the capabilities of your Arduino UNO (not included). It provides 6 relay outputs and 6 analog/digital inputs, enabling a wide range of automation projects. This module is suitable for both beginners and experienced makers. An example program is available for download to facilitate immediate use. The WPK05 is designed for easy self-assembly and seamless integration with your Arduino UNO.

Whadda WPK05 I/O module stacked on an Arduino UNO board — This image shows the Whadda WPK05 I/O module, a blue circuit board with multiple green terminal blocks and black relays, stacked on top of an Arduino UNO board. The module provides expanded input/output capabilities for Arduino projects.

Konfigurazio Argibideak

Despaketatzea eta ikuskatzea

Carefully unpack the Whadda WPK05 I/O module. Inspect all components for any visible damage. Ensure all parts listed in the product packaging are present.

Assembly (if kit version)

If you have the kit version, follow the detailed assembly instructions provided separately with the kit. Ensure all solder joints are clean and secure. The WPK05 is also available as a fully assembled module.

Connecting to Arduino UNO

The WPK05 is a shield designed to stack directly onto an Arduino UNO board.

Align the header pins on the underside of the WPK05 module with the corresponding female headers on your Arduino UNO board.
Gently press the WPK05 module down until it is firmly seated on the Arduino UNO. Ensure all pins are correctly aligned and inserted.
Connect your Arduino UNO to a power source and your computer via USB.

Close-up of Whadda WPK05 I/O module connected to an Arduino UNO — Xehetasun bat view of the Whadda WPK05 I/O module, showing its green terminal blocks, black relays, and various electronic components, securely connected to an Arduino UNO board. This illustrates the physical connection for operation.

Funtzionamendu-argibideak

Software konfigurazioa

To operate the WPK05 I/O module, you will need the Arduino IDE and the appropriate libraries.

Deskargatu eta instalatu Arduino IDEa Arduino ofizialetik webgunea.
Connect your Arduino UNO with the WPK05 shield attached to your computer.
Install any necessary libraries for relay control and analog/digital input handling. Refer to the Whadda product page or documentation for specific library recommendations.
Deskargatu example program (sketch) provided by Whadda for the WPK05 module.
Ireki example program in the Arduino IDE, select your Arduino UNO board and the correct COM port.
Upload the program to your Arduino UNO.

Using Relay Outputs

The WPK05 features 6 relay outputs. These can be used to control higher voltage or current devices (e.g., lights, motors) that cannot be directly driven by the Arduino's digital pins.

Connect the devices you wish to control to the green terminal blocks associated with the relay outputs. Observe proper wiring and safety precautions for the voltage and current ratings of your devices.
In your Arduino code, use the appropriate digital pins to activate or deactivate the relays.

Using Analog/Digital Inputs

The module also provides 6 analog/digital inputs. These can be used to read signals from sensors, switches, or other input devices.

Connect your input devices to the designated input terminals.
In your Arduino code, read the state of these pins using digitalRead() for digital inputs or analogRead() for analog inputs.

Potentzia-gogoetak

Ensure your Arduino UNO and connected devices receive adequate power. The WPK05 module itself draws power from the Arduino. If controlling high-power devices with the relays, ensure the external power supply for those devices is sufficient and correctly isolated.

Mantentzea

Mantendu modulua garbi eta hautsik eta hezetasunik gabe.
Saihestu modulua muturreko tenperaturetara edo eguzki-argitara zuzenean jartzea.
Regularly check connections for looseness or corrosion.
If the module is part of a permanent installation, consider housing it in a protective enclosure.

Arazoak konpontzea

Module Not Responding

Verify that the WPK05 module is correctly seated on the Arduino UNO.
Check all wiring connections for continuity and correct polarity.
Ensure the Arduino UNO is powered on and connected to your computer.
Confirm that the correct board and COM port are selected in the Arduino IDE.
Try uploading a simple "blink" sketch to the Arduino UNO without the shield to confirm the Arduino itself is functioning.

Relays Not Activating

Check the power supply to the devices connected to the relays.
Verify the digital pins controlling the relays are correctly defined and toggled in your Arduino code.
Ensure the relay coil voltage irteera bolumenarekin bat datortage from the Arduino (typically 5V).

Input Readings Incorrect

Check the wiring of your input sensors or switches.
Verify that the correct analog or digital pins are being read in your Arduino code.
Ensure the input signal voltage levels are compatible with the Arduino (e.g., 0-5V for analog, 0V/5V for digital).

Zehaztapenak

Ezaugarri	Xehetasuna
Modelo zenbakia	WPK05
Marka	Zera
Bateragarritasuna	Arduino UNO
Errele irteerak	6
Analog/Digital Inputs	6
liburukiatage	5 Volt
Kolorea	Urdina
Ezaugarri Berezia	Eramangarria
Batzarra	Kit (self-assembly) or pre-assembled module

Bermearen informazioa

Specific warranty details for the Whadda WPK05 I/O module are not provided in the available product data. Please refer to the manufacturer's official website or contact your retailer for warranty terms and conditions.

Laguntza

For technical support, additional documentation, or to download example programs, please visit the official Whadda website or the Velleman Group support portal. You may also contact your point of purchase for assistance.

Whadda is a brand of Velleman Group nv.

Velleman Group Official Webgunea

	Whadda WPM464 4 kanaleko egoera solidoko errele modulua - Eskuliburua eta zehaztapenak Whadda WPM464 4 kanaleko egoera solidoko errele moduluari buruzko gida osoa, sarrera, segurtasun argibideak, zehaztapenak, kableatu xehetasunak eta adibide bat biltzen dituena.ampArduino programa. Ikasi nola aldatu segurtasunez 240V AC / 2A arteko korronte alternoko kargak.
	Whadda WPM463 2 kanaleko egoera solidoko errele modulua - Arduinorekin bateragarria Erabiltzailearen eskuliburua eta xehetasun teknikoakview Whadda WPM463rako, Arduino proiektuetarako diseinatutako 2 kanaleko egoera solidoko errele modulua. Ikasi zehaztapenak, kableatuak eta ex-ri buruz.ampprogramazioa.
	Whadda WPM461 Txip-giltza bistaratze-moduluaren eskuliburua - Arduinorekin bateragarria Whadda WPM461 txiparen giltza bistaratze moduluaren eskuliburu osoa, bere ezaugarriak, zehaztapenak, kableatuak eta exekuzioa zehaztuz.ampArduino programak. Ikasi modulu hau zure elektronika proiektuetan nola integratu.
	Whadda WPM352 RTC DS3231 modulua - Erabiltzailearen eskuliburua Whadda WPM352 RTC DS3231 modulurako erabiltzailearen eskuliburu osoa, zehaztapenak, kableatuak, segurtasun jarraibideak eta Arduino programazio ex zehaztuz.ampdenbora zehatza neurtzeko les.
	Whadda WPI474 Logika Maila Aldatzeko Modulua - Eskuliburua eta Zehaztapenak Whadda WPI474 Logika Maila Aldatzaile Moduluaren erabiltzailearen eskuliburua eta zehaztapen teknikoak. Ikasi bere ezaugarriei, kableatuari eta logika bolumen desberdineko mikrokontrolagailuen artean komunikatzeko erabilerari buruz.tages.
	Whadda WPB109 ESP32 Garapen Plakaren Erabiltzaile Eskuliburua Whadda WPB109 ESP32 garapen-plakaren erabiltzailearen eskuliburua. Gida honek produktuaren inguruko informazioa biltzen du.view, zehaztapenak, funtzioen xehetasunak, Arduino IDEarekin hasteko urratsak, zirriborroak igotzea eta WiFi konexioaampSegurtasun-argibideak eta arazoak konpontzeko aholkuak barne hartzen ditu.

Whadda WPK05