Sarrera
Thank you for choosing the WALI Triple Monitor Stand (GMF003). This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor stand. Please read this manual thoroughly before assembly and retain it for future reference.
Figure 1: WALI Triple Monitor Stand (GMF003) with three monitors.
Segurtasun Informazioa
Please ensure all instructions are read and understood before installation and use. If you have any doubts regarding any part of this installation, please contact customer support. This product is designed for indoor use only. Improper installation or use may cause damage or serious injury. Do not exceed the weight capacity of 22 lbs (10 kg) per arm. Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
Paketearen edukia
Paketeak honako elementu hauek ditu:
- 1 x WALI Free-standing Triple Monitor Mount (Black)
- 1 x Muntatzeko Hardware Kit
- 1 x Erabiltzailearen eskuliburua
Zehaztapenak
| Marka | WALI |
| Modelo zenbakia | GMF003 |
| Muntatze Mota | Tabletop Mount (Free-standing or Grommet) |
| Mugimendu Mota | Artikulatuz |
| Gailu bateragarriak | Monitoreak |
| Gehienezko pantailaren tamaina | 27 inches per screen |
| Pisu Edukiera | 22 lb (10 kg) beso bakoitzeko |
| VESA bateragarritasuna | 75x75mm, 100x100mm |
| Inklinazio angelu maximoa | 90 gradu |
| Kolorea | Beltza |
| Materiala | Metala |
| Elementuaren pisua | 13.59 kilo |
| Paketearen neurriak | 17.6 x 12.8 x 3.62 hazbete |
Figure 2: Display compatibility details including screen size, VESA, and weight capacity.
Figure 3: Overall product dimensions of the WALI Triple Monitor Stand.
Instalazioa
Follow these steps to assemble and install your WALI Triple Monitor Stand. Refer to the included mounting hardware kit for specific components.
- Attach Base Feet: Secure the rubber feet to the bottom of the weighted base to prevent scratching and ensure stability.
- Assemble Pole to Base: Attach the main pole to the weighted base using the provided screws and Allen key. Ensure it is tightened securely.
- Install Horizontal Arms: Slide the horizontal arm assembly onto the main pole. Secure it at the desired height using the locking mechanism.
- Install Top Monitor Arm: Slide the single monitor arm for the top display onto the main pole above the horizontal arms. Secure it at the desired height.
- VESA plakak monitoreei lotzea: Screw the VESA mounting plates onto the back of each monitor. Ensure the screws are appropriate for your monitor's VESA pattern (75x75mm or 100x100mm).
- Monitoreak muntatzea: Carefully slide the monitors (with VESA plates attached) onto the arms. Ensure they are securely seated.
The stand offers installation flexibility with both a weighted base for free-standing use and a grommet base option for desks with a suitable hole (0.4" - 3" thickness).
Figure 4: The stand can be used with a weighted base or a grommet base for varied desk setups.
Instalazio Bideo Gida
Video 1: Official WALI installation guide for the GMF003 Triple Monitor Stand, demonstrating assembly steps.
Funtzionamendua eta doikuntzak
The WALI GMF003 stand allows for various adjustments to achieve an ergonomic setup and optimize your viewesperientzia.
- Altuera doitzea: The monitors can be adjusted vertically along the main pole to your preferred viewing height. Loosen the locking mechanism, slide the arms to the desired position, and re-tighten.
- okertu: Each monitor can be tilted up to +/- 90 degrees to reduce glare and find the optimal viewangelua.
- Birakaria: Monitors can swivel +/- 90 degrees horizontally, allowing for flexible screen positioning.
- Errotazioa: Rotate monitors 360 degrees for landscape or portrait orientation.
- Arm Slide: Mounting holes parts can slide left and right on each arm, making it easier for monitors of different sizes to move side by side for perfect alignment.
Figure 5: Illustration of tilt, swivel, and rotation adjustments for individual monitors.
Kableen kudeaketa
Integrated cable management clips are provided to keep your workspace tidy and organized. Route monitor cables through these clips along the arms and down the main pole to reduce clutter.
6. irudia: Adibample of cables routed through the integrated cable management system.
Mantentzea
To ensure the longevity and proper function of your monitor stand:
- Aldian-aldian egiaztatu torloju eta konexio guztiak ondo estututa daudela ziurtatzeko.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Do not hang objects from the monitor arms or pole.
Arazoak konpontzea
If you encounter any issues with your WALI Triple Monitor Stand, refer to the following common solutions:
- Monitoreak ez daude maila berean: Ensure all VESA plates are securely attached and the horizontal arms are level. Adjust individual monitor tilt and rotation as needed.
- Zutik egotea ezegonkorra sentitzen da: Verify that the base is placed on a flat, stable surface. Re-tighten all connection points, especially the pole to the base. Ensure monitors do not exceed the weight capacity.
- Monitorearen posizioa doitzeko zailtasuna: Check if all locking mechanisms are sufficiently loosened before attempting to adjust. Re-tighten after adjustment.
For further assistance, please contact WALI customer support.
Bermea eta Laguntza
WALI provides experienced and friendly US-based customer support available to assist 7 days a week. For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official WALI webgunea.
