EBL 907 LCD AA/AAA bateria kargagarrien kargagailua eta 1100mAh AAA bateriak erabiltzeko argibideen eskuliburua

1. Sarrera eta Overview

This manual provides detailed instructions for the EBL 907 LCD AA/AAA Rechargeable Battery Charger and the accompanying 8-pack of 1100mAh Ni-MH AAA rechargeable batteries. This system is designed for efficient and safe charging of compatible batteries, offering a sustainable power solution for various electronic devices.

Ezaugarri nagusiak:

• Individual charging slots for 1, 2, 3, or 4 Ni-MH/Ni-CD AA/AAA rechargeable batteries.
• Includes 8 high-capacity 1100mAh Ni-MH AAA rechargeable batteries with Procyco 1200 Tech, supporting up to 500 deep charging/discharging cycles.
• Smart LCD display for each slot, showing individual charging progress. The battery icon stops flashing when fully charged.
• Advanced MCU control and -∆V function for optimized charging.
• Integrated safety features: over-heat protection, over-current protection, short-circuit protection, and detection for non-rechargeable or defective batteries.
• Worldwide compatibility with 100-240V AC, 50/60 Hz input.

Figure 1: EBL 907 LCD AA/AAA Rechargeable Battery Charger with included AAA batteries.

2. Konfiguratzeko argibideak

1. Unpack the Charger and Batteries: Carefully remove the EBL 907 charger and the 8 AAA rechargeable batteries from their packaging.
2. Ikuskatu Kargagailua: Ensure the charger is free from any visible damage. The foldable AC plug is located on the back of the unit.
3. Sartu bateriak: Insert 1 to 4 compatible Ni-MH/Ni-CD AA or AAA rechargeable batteries into the charging slots. Ensure correct polarity (+ and - ends) as indicated on the charger and batteries. The charger supports individual charging, so you can charge any number of batteries from one to four.
4. Konektatu energiara: Extend the foldable AC plug and plug the charger directly into a standard wall outlet (100-240V AC). The LCD display will illuminate, showing the current charge status of each inserted battery.

Figure 2: Proper insertion of batteries into the EBL 907 charger, highlighting individual slots.

3. irudia: Xehetasuna view of the LCD display and battery contact points.

3. Funtzionamendu-argibideak

The EBL 907 charger features an intelligent LCD display that provides real-time feedback on the charging status of each battery.

• Kargatzeko adierazpena: Once plugged in with batteries inserted, the LCD screen will show individual battery icons. These icons will flash to indicate that charging is in progress.
• Karga osoa adieraztea: When a battery is fully charged, its corresponding icon on the LCD display will stop flashing and remain solid.
• Erroreak hautematea: If a non-rechargeable or defective battery is inserted, the LCD will display an "ERROR" message for that specific slot. Remove the problematic battery immediately.
• Kargatzeko denbora: Charging times vary depending on the battery capacity and discharge level. For the included 1100mAh AAA batteries, a full charge typically takes a few hours.

4. Mantentzea

• Garbiketa: Disconnect the charger from the power outlet before cleaning. Use a dry, soft cloth to wipe the charger and battery contacts. Do not use abrasive cleaners or immerse the charger in water.
• Biltegiratzea: Store the charger and batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge batteries to about 50% capacity.
• Bateria zaintzea: Avoid fully discharging Ni-MH batteries frequently, as this can reduce their lifespan. Recharge them when they are low, rather than completely depleted.

5. Arazoak

• Bateriak ez kargatzen:
  • Ziurtatu bateriak polaritate zuzenarekin sartuta daudela.
  • Check if the charger is securely plugged into a working power outlet.
  • Verify that the batteries are rechargeable Ni-MH or Ni-CD types. The charger is not compatible with alkaline or lithium batteries.
  • If an "ERROR" message appears, the battery may be defective or incompatible. Remove and replace it.
• Karga motela:
  • Ensure the charger is not in an excessively hot environment, which can affect charging efficiency.
  • Check the battery capacity; higher capacity batteries will naturally take longer to charge.
• Kargagailua gainberotzea:
  • Disconnect the charger immediately. Allow it to cool down.
  • Ziurtatu kargagailuaren inguruan aireztapen egokia funtzionatzen ari den bitartean.

6. Zehaztapenak

7. Zer dago kutxan

• 1 x EBL 907 LCD AA/AAA Rechargeable Battery Charger
• 8 x EBL 1100mAh AAA Rechargeable Batteries

8. Segurtasun informazioa

Mesedez, irakurri eta jarraitu segurtasun neurri hauek lesioak edo kalteak saihesteko:

• Do not charge 1.5V alkaline or carbon batteries, as this may cause leakage or explosion.
• Do not disassemble or reassemble the charger for any reason.
• Use the charger only with compatible Ni-MH or Ni-CD rechargeable batteries.
• Kargagailua eta bateriak uretatik, sutik eta tenperatura altuetatik urrun eduki.
• Ez jarri zirkuitulaburra bateriaren terminalak.
• Mantendu haurren eskura.

9. Bermea eta Laguntza

EBL products are designed for reliability and performance. This product is covered by the manufacturer's warranty. For specific warranty details, technical support, or customer service inquiries, please refer to the official EBL webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin zuzenean. Gorde erosketaren egiaztagiria berme-erreklamazioetarako.