ZKTeco IN01-A/3G Hatz-markako denbora-kontrolerako eta sarbide-kontrolerako terminalaren erabiltzailearen eskuliburua

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of the ZKTeco IN01-A/3G Fingerprint Time Attendance and Access Control Terminal. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Produktua amaitu daview

The ZKTeco IN01-A/3G is a sophisticated 3-inch TFT screen terminal designed for both time attendance and access control applications. It integrates advanced fingerprint recognition technology to provide secure and efficient user identification.

1. irudia: Aurrealdea view of the ZKTeco IN01-A/3G terminal, showing the 3-inch TFT screen, numeric keypad, navigation buttons, and the fingerprint sensor with an illuminated ring.

Key components include a high-resolution TFT display for user interaction, a numeric keypad for data entry, navigation buttons for menu control, and a robust fingerprint sensor for biometric authentication.

3. Ezaugarriak

• Hatz-marken edukiera: Supports storage for up to 3000 fingerprints.
• Pantaila: Equipped with an LCD (3-inch TFT screen) for clear visual feedback.
• Identification Method: Primarily uses fingerprint recognition for user authentication.
• Iraunkortasuna: Features a scratch-proof design for enhanced longevity.
• Funtzionalitatea: Combines time attendance tracking with access control capabilities.

4. Konfigurazioa

4.1 Desontziratzea eta ikuskatzea

Carefully unpack the device and verify that all components are present and undamaged. Report any discrepancies to your supplier immediately.

4.2 Gailua muntatzea

1. Choose a suitable location for installation, ensuring it is protected from direct sunlight, extreme temperatures, and moisture.
2. Use the provided mounting template to mark drilling positions on the wall.
3. Zulatu zuloak eta sartu tapoiak.
4. Lotu muntaketa-plaka horman torlojuak erabiliz.
5. Attach the IN01-A/3G terminal to the mounting plate.

4.3 Energia-konexioa

Connect the provided power adapter to the device's power input port and then plug it into a standard electrical outlet. Ensure the power supply matches the device's requirements.

4.4 Sare konexioa (aukerakoa)

If network connectivity is required for data transfer or remote management, connect an Ethernet cable to the device's LAN port and to your network router/switch.

4.5 Hasierako konfigurazioa

Upon first power-up, the device may prompt for initial setup, including date, time, and administrator registration. Follow the on-screen instructions to complete these steps.

5. Funtzionamendu-argibideak

5.1 Administrator Registration

The first step is to register an administrator fingerprint. This user will have access to all device settings and user management functions.

1. Sakatu MENUA botoia.
2. Nabigatu Erabiltzaileen kudeaketa eta hautatu Erabiltzaile berria.
3. Enter a User ID and then select Erregistratu hatz-marka.
4. Place your finger on the sensor three times as prompted, ensuring full contact each time.
5. Set the user's privilege level to Administratzailea.
6. Gorde ezarpenak.

5.2 User Fingerprint Enrollment

To allow other users to record attendance or gain access, their fingerprints must be enrolled.

1. Access the menu as an administrator.
2. Nabigatu Erabiltzaileen kudeaketa eta hautatu Erabiltzaile berria or select an existing user to add a fingerprint.
3. Enter or confirm the User ID.
4. Hautatu Erregistratu hatz-marka and follow the on-screen prompts to scan the user's finger three times.
5. Gorde erabiltzailearen informazioa.

5.3 Recording Attendance

Users can record their attendance by simply placing their enrolled finger on the fingerprint sensor. The device will provide visual and audible confirmation of a successful scan.

5.4 Access Control Functionality

For access control, the device will verify the enrolled fingerprint against its database. Upon successful verification, it will trigger the connected access mechanism (e.g., door lock) according to the configured access rules.

6. Mantentzea

6.1 Gailua garbitzea

Regularly clean the fingerprint sensor and screen with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

6.2 Datuen babeskopia

It is recommended to regularly back up attendance records and user data to an external storage device (e.g., USB drive) or a connected server to prevent data loss.

6.3 Firmware eguneraketak

Periodically check the ZKTeco official website for firmware updates. Keeping the device's firmware up-to-date ensures optimal performance and access to new features.

7. Arazoak

• Gailua ez da pizten:
  • Ziurtatu korronte-egokitzailea ondo konektatuta dagoela bai gailura bai funtzionatzen duen entxufe batera.
  • Egiaztatu korronte-hartunea funtzionala dela.
• Hatz-marka ez da ezagutzen:
  • Ziurtatu hatza garbia eta lehorra dagoela.
  • Place your finger flat and centered on the sensor.
  • Try enrolling the fingerprint again if the issue persists.
  • Garbitu hatz-marken sentsorearen gainazala.
• Cannot access menu:
  • Ensure you are using an enrolled administrator fingerprint or password.
• Datuen transferentzia arazoak:
  • Egiaztatu sareko kableen konexioak.
  • Verify network settings on the device and server.

8. Zehaztapenak

9. Bermea eta Laguntza

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ZKTeco webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

For further assistance, you may contact ZKTeco customer service or your local distributor.