Arducam 64MP Hawkeye Ultra Bereizmen Handiko Autofoku Kamera Modulua Raspberry Pi-rako Erabiltzaile Eskuliburua

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your Arducam 64MP Hawkeye Ultra High-Resolution Autofocus Camera Module. This camera module is designed for use with various Raspberry Pi boards, offering high-resolution imaging capabilities and autofocus functionality.

Ezaugarri nagusiak:

• 64MP ultra-high resolution (9152 x 6944) for still images.
• Autofocus lens with up to 10x digital zoom.
• Compatible with Raspberry Pi 5/4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH.
• MIPI CSI-2 interface.
• Supports manual focus control via software.

2. Paketearen edukia

Mesedez, egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 1 x 64MP-AF Camera Board
• 1 x 15cm 15pin FPC Cable
• 1 x 15cm 15pin to 22pin FPC Cable

Image: The Arducam 64MP Hawkeye camera module shown with both the 15cm 15pin FPC cable and the 15cm 15pin to 22pin FPC cable, which are included in the package.

3. Konfigurazioa

Follow these steps to connect and prepare your Arducam 64MP Hawkeye camera module with your Raspberry Pi.

3.1 Hardware konexioa

1. Ensure your Raspberry Pi is powered off and disconnected from any power source.
2. Locate the MIPI CSI-2 camera interface on your Raspberry Pi board. This is typically a long, narrow connector.
3. Gently pull up the plastic clip on the camera connector.
4. Insert the FPC (Flexible Printed Circuit) cable from the camera module into the connector. Ensure the silver contacts on the FPC cable face the correct direction (towards the HDMI port on most Raspberry Pi models). Use the appropriate FPC cable (15pin or 22pin) based on your Raspberry Pi model.
5. Push the plastic clip back down to secure the FPC cable.
6. Connect the other end of the FPC cable to the Arducam 64MP Hawkeye camera module.

Image: The Arducam 64MP Hawkeye camera module with its flexible printed circuit (FPC) cable, ready for connection to a Raspberry Pi board.

Image: A visual comparison showing the Arducam 64MP Hawkeye camera module connected to both a Raspberry Pi 4B (left) and a Raspberry Pi 5 (right), illustrating compatibility.

3.2 Software konfigurazioa

The Arducam 64MP Hawkeye camera module requires specific software configuration on your Raspberry Pi. It is compatible with Raspberry Pi OS (Debian Bullseye) and utilizes the libcamera application framework.

1. Power on your Raspberry Pi after connecting the camera module.
2. Ensure your Raspberry Pi OS is updated to the latest version of Bullseye.
3. Install necessary camera drivers and libraries. Refer to the official Arducam documentation for the most up-to-date installation guide. A quick guide for Raspberry Pi is often available at bit.ly/64MP-Guide-for-Raspberry-Pi.
4. After installation, you can test the camera using libcamera commands or the provided pre-compiled program for easy access.

4. Funtzionamendu-argibideak

Once the camera module is successfully set up, you can begin capturing images and video.

4.1 Irudiak eta bideoak ateratzea

Erabili libcamera tools or Arducam's provided software to capture high-resolution images and video. The camera supports a maximum still image resolution of 9152 x 6944 pixels and video capture up to 1080p.

4.2 Autofokua eta eskuzko fokua

The 64MP Hawkeye module features a built-in autofocus motor. This allows for quick and automatic focusing. Additionally, manual focus can be controlled through software commands, providing precise control over the focal point.

• Fokatze automatikoa: The camera will automatically adjust its focus to achieve a clear image.
• Eskuzko fokua: Specific software commands can be used to set the focus distance manually. Refer to the Arducam autofocus guide (e.g., bit.ly/16MP-64MP-Autofocus-Guide) for detailed instructions.

4.3 Zoom digitala

The camera supports up to 10x digital zoom, which can be controlled via software. Digital zoom magnifies the image electronically, which may affect image quality at higher zoom levels.

Irudia: Collage erakusketa batasing various images captured using the Arducam 64MP Hawkeye camera module, demonstrating its high-resolution capabilities in different environments.

5. Mantentzea

Proper care and maintenance will ensure the longevity and optimal performance of your camera module.

• Keep the camera lens clean and free from dust and fingerprints. Use a soft, lint-free cloth specifically designed for optics.
• Avoid exposing the module to extreme temperatures, humidity, or direct sunlight for extended periods.
• Handle the FPC cable and connectors with care to prevent damage.
• Store the module in a dry, dust-free environment when not in use.

6. Arazoak

If you encounter issues with your Arducam 64MP Hawkeye camera module, refer to the following common troubleshooting steps:

• Kamera ez da detektatu:
  • Ensure the FPC cable is correctly inserted and securely latched on both the camera module and the Raspberry Pi. Verify the cable orientation.
  • Confirm that the Raspberry Pi is running a compatible operating system (e.g., Raspberry Pi OS Bullseye) and that camera support is enabled in the configuration.
  • Check for any loose connections or damage to the FPC cable.
• Irudiaren kalitate eskasa:
  • Clean the camera lens with a suitable optical cleaning cloth.
  • Verify that the camera is properly focused. If autofocus is not performing as expected, try manual focus adjustments.
  • Ziurtatu zure ingurunean argiztapen egokia dagoela.
• Softwarearen bateragarritasun arazoak:
  • Some users have reported compatibility challenges with newer Raspberry Pi OS versions (e.g., Bookworm) and libcamera. Always refer to the latest official Arducam documentation and community forums for updated drivers and solutions.
  • Ensure all necessary software packages for camera operation are installed and up-to-date.

For further assistance, please contact Arducam technical support.

7. Zehaztapenak

Detailed technical specifications for the Arducam 64MP Hawkeye Ultra High-Resolution Autofocus Camera Module:

8. Bermea eta Laguntza

Arducam provides technical support for its products. If you encounter any issues or require assistance with your 64MP Hawkeye camera module, please contact Arducam directly through their official support channels.

Informazio eta baliabide gehiago lortzeko, bisitatu Arducam Store edo haien ofiziala webgunea.