Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight Instruction Manual

Sarrera

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight. Please read all instructions carefully before installation and retain this manual for future reference.

Irudia: Aurrealdea view of the Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight.

Segurtasun Informazioa

Sute, deskarga elektriko edo pertsonen lesioen arriskua murrizteko, jarraitu segurtasun neurri hauek:

• Always turn off power at the circuit breaker before beginning installation or performing any maintenance.
• Ziurtatu konexio elektriko guztiek tokiko kode eta ordenantzen araberakoak direla, baita Kode Elektriko Nazionalaren (NEC) araberakoak ere.
• Kableatzeari buruz ziur ez bazaude, kontsultatu elektrizista kualifikatu batekin.
• Ez instalatu gailuaren funtzionamendu-tenperatura nominala baino handiagoa den lekuetan.
• This fixture is suitable for damp locations and is IC Rated, meaning it is safe for direct contact with insulation.
• Ez aldatu gailuaren edukia eta ez erabili aurreikusitako erabileratik kanpo beste helburu batzuetarako.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• 1 x Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight
• 1 x Junction Box (J-Box) with integrated power supply
• Muntatzeko Hardwarea

Zehaztapenak

Konfigurazioa eta Instalazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

1. Itzali energia: Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker.
2. Sabaiaren irekidura prestatu: Cut a 4-inch diameter hole in the ceiling at the desired location. Ensure there are no obstructions such as joists or pipes.
3. Konektatu kableatzea: Open the junction box cover. Connect the supply wires to the wires inside the junction box using the provided wire nuts:
   • Connect the black wire from the supply to the black wire of the J-Box.
   • Connect the white wire from the supply to the white wire of the J-Box.
   • Connect the ground wire from the supply to the green wire of the J-Box.
   Secure the junction box cover.

Image: The LED downlight connected to its junction box.
4. Hautatu kolore-tenperatura (CCT): Before inserting the light into the ceiling, locate the CCT selection switch on the side of the junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Irudia: Gertuko planoa view of the CCT selection switch located on the side of the junction box.

5. Insert Junction Box: Place the wired junction box into the ceiling opening.
6. Beheko argia instalatu: Connect the downlight to the junction box via the male/female connector. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling hole. The clips will automatically secure the light in place.


Irudia: Albokoa view of the downlight showing the tension spring clips used for installation.

7. Berrezarri boterea: Piztu berriro etengailuan.

Funtzionamendu-argibideak

Kolore-tenperatura hautatzea

The Maxxima 4-inch LED Downlight features 5 CCT (Correlated Color Temperature) options, allowing you to customize the light output to your preference. The selection switch is located on the side of the junction box.

• 2700K: Soft White (Warm, inviting light)
• 3000K: Warm White (Slightly brighter, still warm)
• 3500K: Bright White (Neutral, balanced light)
• 4000K: Neutral White (Cooler, more energetic light)
• 5000K: Daylight (Brightest, closest to natural daylight)

To change the CCT, you must access the junction box. It is recommended to select your preferred CCT before final installation into the ceiling. If changing after installation, ensure power is off before accessing the J-Box.

Image: Visual representation of the five selectable color temperatures.

Iluntzeko funtzionaltasuna

This LED downlight is dimmable from 20% to 100% when used with a compatible LED dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage to the fixture.

Mantentzea

Maxxima LED Downlight-ak mantentze-lan minimoa behar du.

• Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Garbitu aparatua zapi leun, lehor edo apur bat lehor batekin.amp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik, akabera edo osagai elektrikoak kaltetu baitezakete.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: LED argi-iturria integratuta dago eta ezin da ordezkatu. Ez saiatu argi-tresna irekitzen edo konpontzen.

Arazoak konpontzea

If you encounter issues with your downlight, refer to the following table:

Bermea

Maxxima LED beheranzko argi hau estalita dago 3 urteko bermea erosketa-datatik aurrera. Berme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera normalaren pean. Berme-erreklamazioak edo xehetasun gehiago lortzeko, jarri harremanetan Maxxima bezeroarentzako arreta-zerbitzuarekin.

Bezeroarentzako Arreta

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webuneko harremanetarako informazioa lortzeko gunea.

Please have your model number (MRL-S40905) and date of purchase available when contacting support.