BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Sarrera

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produktuaren Ezaugarriak

• Mugimendu-sentsore integratua: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Hiru funtzionamendu modu:
  • AUTO MODUA: Light activates when motion is detected in dark conditions.
  • ON modua: Light remains constantly on.
  • G modua: Light activates when motion is detected in both daytime and nighttime conditions.
• Hiru kolore-tenperatura: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Diseinu ultramehea: Pro baxuafile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Instalazio polifazetikoa: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Argibide eskuliburua (dokumentu hau)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Segurtasun Informazioa

OHARRA: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ziurtatu energia-iturria itzalita dagoela kableatua manipulatu aurretik.
• This fixture is designed for 120V AC power supply.
• Ez saiatu muntaketa-elementua aldatzen.
• Mantendu haurrak instalazio eremutik urrun.

Konfigurazioa eta instalazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

1. Instalaziorako prestatu:
   • Itzali korrontea etengailu elektrikoan hasi aurretik.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Instalatu muntatzeko euskarria:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Hari-konexioak:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Argi-tresna muntatu:
   • Kontu handiz sartu hari guztiak lotura-kutxan.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Berrezarri boterea: Piztu berriro etengailuan.

4. irudia: Instalazio prozesuaren gida bisuala.

Funtzionamendu-argibideak

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Eragiketa modua hautatzea:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • AUTOA: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • ON: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 segundo
   • 120S: 120 segundo (2 minutu)
   • 180S: 180 segundo (3 minutu)

Figure 5: Switches for adjusting hold time and operating modes.

Mantentzea

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Garbiketa: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED bizitza: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Ikuskapena: Aldian-aldian egiaztatu aparatua kalterik edo konexio solterik dagoen. Arazoren bat aurkitzen baduzu, deskonektatu korrontea eta kontsultatu elektrizista kualifikatu bati.

Arazoak konpontzea

Argi-gailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

Zehaztapenak

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.