Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Produktua amaitu daview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Ezaugarri nagusiak:

• Aire-fluxu handiko diseinua: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Integrated D-RGB Lighting: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Aurrez instalatutako zaleak: Includes three high-performance M25-140 D-RGB fans.
• Hozte-laguntza zabala: Supports up to 420mm radiators in the front and 360mm in the top.
• Barrualde zabala: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Biltegiratze malgua: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Aurrealdeko S/I modernoa: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Konfigurazioa eta instalazioa

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Txasisa prestatzea

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Plaka amaierako instalazioa

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Energia hornitzeko unitatea (PSU) instalatzea

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Biltegiratze-gailuaren instalazioa

The case offers extensive storage options:

• 2.5 hazbeteko SSDak: Up to 9 dedicated 2.5" drive bays are included.
• 3.5 hazbeteko HDDak: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Txartel grafikoaren (GPU) instalazioa

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Hozte-sistemaren instalazioa

The chassis supports various fan and radiator configurations:

• Zaleen laguntza:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Atzekoa: 1x 120mm edo 1x 140mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Atzekoa: 120 mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Kableen kudeaketa

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Instalazio bideoak

3. Funtzionamendu-argibideak

3.1 Aurreko S/I panela

Aurreko S/I panelak portu eta kontrol garrantzitsuetarako sarbide erosoa eskaintzen du:

• Pizteko botoia: Zure sistema pizteko/itzaltzeko.
• USB 3.0 portuak (x2): USB 3.0 gailuak konektatzeko.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Mikrofono/Aurikularretarako Konbinazio Jack: Audio sarrera eta irteerarako.
• D-RGB moduko botoia: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB kolore botoia: D-RGB argiztapenaren kolorea aldatzen du.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB Lighting Control

The integrated D-RGB lighting can be controlled in two ways:

• Eskuzko kontrola: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Plaka basearen sinkronizazioa: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Mantentzea

Mantentze-lan erregularrak zure ordenagailuaren osagaien errendimendu optimoa eta iraupena bermatzen laguntzen du.

• Hautsaren iragazketa: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Barruko garbiketa: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Kanpoko garbiketa: Garbitu kanpoko gainazalak leun batekin, damp oihal. Saihestu garbitzaile edo disolbatzaile urratzaileak.

5. Arazoak

Atal honek zure ordenagailuaren kaxarekin izan ditzakezun arazo ohikoenei buruzkoa da.

5.1 Energia arazoak

• Sistemak ez du pizten:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Egiaztatu PSU etengailua 'ON' posizioan dagoela.
  • Egiaztatu aurrealdeko paneleko etengailuaren kablea plaka basearen F_PANEL goiburura behar bezala konektatuta dagoela.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Haizagailuaren zarata edo matxura

• Haizagailuaren zarata gehiegi:
  • Begiratu hauts-pilaketa dagoen haizagailuaren paletan eta garbitu behar izanez gero.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Haizagailua ez dabil biratzen:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Zehaztapenak

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Bermea eta Laguntza

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks webwebgunean edo jarri harremanetan bere bezeroarentzako zerbitzuarekin.

Harremanetarako informazioa:

• Webgunea: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., 150. zenbakia, Jian 1. kalea, Zhonghe Dist. Taipei Hiri Berria 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).