1. Sarrera eta Overview
The Enthuze ENT-TD6000 is a versatile device designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank. It also includes integrated LED light functions for various situations.
Ezaugarri nagusiak hauek dira:
- Inflatable Function: Capable of inflating car tires, motorcycle tires, bicycle tires, air mattresses, water toys, and sports balls.
- Car Jump Start: Designed to jump-start 12V vehicle batteries using the included cables.
- Mobile Power Supply: Can charge/power cell phones, tablets, game consoles, cameras, and other digital smart devices.
- LED Light Functions: Features multiple LED light modes for illumination and signaling.
Figure 1: Enthuze ENT-TD6000 Jump Starter and included accessories.
2. Konfigurazioa eta hasierako erabilera
2.1 Gailua kargatzea
Before first use, fully charge the Enthuze ENT-TD6000. Connect the device to a suitable power source using the provided USB-C cable. The display will indicate the charging status. A full charge typically takes approximately 3.5 hours.
2.2 Connecting Jump Start Cables
To prepare for jump-starting, ensure the jump starter is adequately charged. Connect the smart battery clamp to the jump starter's designated port. The device will indicate readiness.
Video 1: Demonstration of connecting the smart battery clamp and jump-starting a vehicle.
3. Funtzionamendu-argibideak
3.1 Ibilgailu bat abiaraztea
- Ziurtatu abiarazlea guztiz kargatuta dagoela.
- Konektatu bateria adimenduna clamp to the jump starter.
- Erantsi gorria (+) clamp ibilgailuaren bateriaren terminal positiboan.
- Erantsi (-) cl beltzaamp to the negative terminal of the vehicle's battery or a solid, unpainted metal part of the engine block.
- Press the switch button on the jump starter to activate the jump-start function.
- Piztu ibilgailuaren motorra.
- Once the vehicle starts, immediately remove the clamps from the vehicle battery, then disconnect the smart battery clamp jauzi hasieratik.
This device is suitable for jump-starting vehicles with up to 8.0L gasoline engines and 6.0L diesel engines, including small cars, SUVs, pickup trucks, motorcycles, and boats.
3.2 Aire konpresorea erabiltzea
- Screw the air hose into the designated port on the jump starter.
- Connect the other end of the air hose to the tire valve or the item to be inflated.
- Use the '+' or '-' buttons to set the desired air pressure.
- Press and hold the switch button for 3 seconds to start the inflation process.
- The device will automatically stop when the set pressure is reached.
- Disconnect the air hose from the item and the jump starter.
3.3 Power Bank gisa erabiltzea
The Enthuze ENT-TD6000 features USB output ports to charge various electronic devices:
- USB irteera 1: 5V=3A, 9V=2A, 12V=1.5A
- USB irteera 2: 5V=2.1A
Connect your device to the appropriate USB port using a compatible charging cable.
3.4 LED argiaren funtzioak
The device includes multiple LED light modes:
- Argi egonkorra: Argiztapen orokorrerako.
- SOS modua: Larrialdi-seinaleetarako.
- Estroboko argia: For attracting attention.
Press the light button to cycle through the different modes.
4. Mantentzea
To ensure the longevity and optimal performance of your Enthuze ENT-TD6000, follow these maintenance guidelines:
- Ohiko karga: Bateriaren osasuna mantentzeko, kargatu gailua 3-6 hilabetero, erabiltzen ez baduzu ere.
- Biltegiratzea: Store the device in a cool, dry place. The recommended storage temperature should not be lower than -10°C or higher than 50°C. Extreme temperatures can shorten the product's life and damage the built-in battery.
- Garbiketa: Erabili zapi leun eta lehor bat gailuaren kanpoaldea garbitzeko. Ez erabili produktu kimiko gogorrik edo material urratzailerik.
- Kableen ikuskapena: Periodically inspect the jump start cables and air hose for any signs of wear, damage, or corrosion. Replace if necessary.
Figure 2: Product with accessories and important warnings.
5. Arazoak
Ikusi beheko taula arazo ohikoenak eta haien irtenbideak ikusteko:
| Errore-mezua | Kausa | Irtenbidea |
|---|---|---|
| ERROREA | Jumper cables connected with reversed polarity to the car battery. | Konektatu bateria clamps to the correct positive and negative terminals. |
| BAXUA | Behar bezala konektatuta autoaren bateria, baina bateria boltage is below 9V, and the core temperature is above 0°C/32°F. | BOOST button for 2 seconds to use the forced boost function. |
| IRTEERA | High-temperature protection activated, displaying core temperature overheating. | The product activates temperature protection below 50°C/122°F and resumes output when the temperature drops to 45°C/113°F. |
| IN | Low-temperature protection activated. | The product activates temperature protection below -10°C/-4°F and resumes output at 0°C/32°F-37°F. |
| HASI | Buzzer sounding, silence after 30 seconds. | Overcurrent detected, stop starting vehicle, disappear for 30S. |
| HASI | Vehicle start detected more than 5 times within 10 minutes, buzzer sounds buzzer mutes after 30S "START" continues to flash. | Stop starting the vehicle and the safety mode disappears after 10 minutes. |
6. Zehaztapenak
Detailed technical specifications for the Enthuze ENT-TD6000:
| Parametroa | Balioa |
|---|---|
| Produktuaren izena | Jump Starter Aire Konpresorearekin |
| Eredua | ENT-TD6000 |
| Tamaina | 193 x 110 x 53 mm |
| Inflazio-presioaren tartea | 0.2-8 bar / 3-120 psi |
| Funtzionamendu-tenperatura | Charge: 0°C~45°C, Discharge: -10°C~45°C |
| Biltegiratze Tenperatura | -10°C~50°C |
| Inflatable Hose Length | 435mm (including air nozzle) |
| Bateria Edukiera | 41.44Wh (14.8V, 2.8Ah) |
| Laneko Zarata | Metro 80etik 1 dB baino gutxiagora |
| Kargatzeko sarrera | 5V=3A |
| Kargatzeko Denbora | 3.5 ordu inguru |
| USB irteera 1 | 5V=3A, 9V=2A, 12V=1.5A |
| USB irteera 2 | 5V=2.1A |
| Air Pressure Sensor Accuracy | ± 1psi |
| Hasi Car Voltage | 12V |
| Start Car Current | 500A (1000A Peak) |
Figure 3: Basic Parameters of the Enthuze ENT-TD6000.
7. Segurtasun ohartarazpen garrantzitsuak
- Do not overcharge the internal battery. Refer to the instruction manual for proper charging procedures.
- Do not smoke, strike a match, or cause a spark in the vicinity of the power pack during operation.
- Kargatu barneko bateria ondo aireztatutako gune batean bakarrik.
- Turn off the 12V firing output when the remaining power of the device's battery cell is less than 20%. USB port can output normally.
- Pertsonentzako Lesio Arriskua. Ez erabili produktu hau elikatze-kablea edo bateria-kableak nolabait hondatuta badaude.
- Gailu hau ez da konponketa-instalazio komertzialetan erabiltzeko pentsatuta.
- Gailu hau erabiltzen ez denean barrualdean gordetzeko dago. Gailu hau ez da gordeko edo kanpoan utziko erabiltzen ez denean.
- Gailu hau aire librean aldi baterako erabiltzeko pentsatuta dago eta zentzuzko kontuz ibili behar da gailua hezeetan erabiltzean.
8. Bermea eta Laguntza
For warranty information or technical support, please contact Enthuze Automotive Products directly. Keep your purchase receipt as proof of purchase.
