ANCEL TD700 All System OBD2 Scanner User Manual

1. Sarrera

The ANCEL TD700 is a professional-grade diagnostic scan tool designed to provide comprehensive system diagnostics for Toyota, Lexus, and Scion vehicles. It also supports full OBD-II functions for all OBD-II compliant vehicles manufactured from 1996 onwards. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. Segurtasun informazioa

• Beti egin automobilgintzako probak ondo aireztatutako gune batean.
• Wear safety eye protection and clothing that meets safety standards.
• Avoid placing the device near the engine or exhaust system to prevent damage from high temperatures.
• Ez erabili gailua gidatzen ari zaren bitartean.
• Keep the device dry and clean. Avoid contact with water, oil, or grease.
• Refer to your vehicle's service manual for specific diagnostic procedures and safety precautions.

3. Paketearen edukia

• 1x ANCEL TD700 All System OBD2 Scanner
• 1x ANCEL Protective Case

The ANCEL TD700 scanner neatly stored within its durable protective case.

4. Produktua amaitu daview

The ANCEL TD700 features a user-friendly interface with a clear display and intuitive button layout for easy navigation and operation.

The ANCEL TD700 scanner, showcasing its display and control buttons, alongside its protective carrying case.

Gailuaren osagaiak:

• Bistaratzeko pantaila: Shows diagnostic results, menu options, and live data.
• Nabigazio botoiak (Gora/Behera/Ezkerra/Eskuina): Menuetan zehar mugitzeko eta aukerak hautatzeko erabiltzen da.
• ENTER botoia: Aukeraketa edo ekintza baieztatzen du.
• EXIT/BACK Button: Aurreko pantailara itzultzen da edo eragiketa bat bertan behera uzten du.
• I/M botoia: I/M Prestutasun egoerara sarbide azkarra.
• IRAKURRI DTC botoia: Directly reads Diagnostic Trouble Codes.
• ERASE DTC Button: Directly clears Diagnostic Trouble Codes.
• OBD-II Connector: Connects the scanner to the vehicle's OBD-II port.

5. Konfigurazioa

1. Kokatu OBD-II ataka: The 16-pin Data Link Connector (DLC) is usually located under the dashboard on the driver's side of the vehicle.
2. Turn Off Ignition: Ensure the vehicle's ignition is turned off before connecting the scanner.
3. Connect Scanner: Konektatu ondo eskaneraren OBD-II konektorea ibilgailuaren DLCra.
4. Piztea: Turn the vehicle's ignition to the ON position (engine off). The scanner will power on automatically.
5. Diagnostikoa hasi: Follow the on-screen prompts to begin your diagnostic session.

6. Funtzionamendu-argibideak

6.1 General OBD-II Functions (for all OBD-II compliant vehicles)

The TD700 provides standard OBD-II diagnostic capabilities for engine systems.

The TD700's display showing various OBD-II diagnostic options, including Read Codes, Erase Codes, Live Data Stream, I/M Readiness, EVAP System Test, and Vehicle Information.

• Irakurri kodeak: Retrieves generic (P0, P2, P3, and U0) and manufacturer-specific (P1, P3, and U1) codes, as well as pending codes.
• Ezabatu kodeak: Clears Diagnostic Trouble Codes (DTCs) from the vehicle's computer and turns off the Malfunction Indicator Lamp (MIL/Check Engine Light).
• Zuzeneko datuak: Displays real-time operating parameters of the vehicle's engine in text or graph format.
• I / M prest egotea: Checks the status of emission-related monitoring systems to ensure they are operating correctly.
• Ibilgailuen informazioa: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CID), and Calibration Verification Number (CVN).

6.2 Toyota/Lexus/Scion Specific Functions

The TD700 offers advanced, manufacturer-level diagnostics and special functions tailored for Toyota, Lexus, and Scion vehicles.

The TD700's main menu showing options for OBDII, Toyota-specific diagnostics, Oil Reset, EPB Reset, BAT, BMS Reset, ETC Reset, and Tool Setup.

The TD700 displaying a menu for selecting various vehicle systems for diagnosis, such as Engine, Transmission, Airbag, TPMS, ABS, SAS, BMS, EPB, GPS, ESP, and A/C.

The TD700 showing a menu for selecting special functions like Oil Reset, EPB Reset, ETC Reset, TPMS Reset, BMS Reset, ABS Bleeding, SAS Calibration, DPF Regeneration, Throttle Learning, Battery Registration, and Injector Coding.

• Sistema guztien diagnostikoa: Accesses and diagnoses all available electronic control systems in compatible Toyota, Lexus, and Scion vehicles, including Engine, Transmission, ABS, Airbag (SRS), TPMS, SAS, BMS, EPB, A/C, and more.
• Olioaren berrezarpena: Olio-aldaketa baten ondoren olio-zerbitzuko argia berrezartzen du.
• EPB Berrezarri: Balazta-pastillak aldatu ondoren, aparkaleku-balazta elektronikoaren sistema berrezartzen du.
• BAT (Battery) Management System (BMS) Reset: Performs battery registration and reset functions.
• ETC Berrezarri: Resets the Electronic Throttle Control system.
• ABS odoljarioa: ABS balaztak husteko prozedurak egiten ditu.
• SAS Kalibrazioa: Zuzendaritza-angeluaren sentsorea kalibratzen du.
• DPFaren birsorkuntza: Diesel Partikula Iragazkiaren birsorkuntza abiarazten du.
• Throttle Learning: Performs throttle body relearn procedures.
• Bateriaren erregistroa: Bateria berri bat ibilgailuaren sisteman erregistratzen du.
• Injektorearen kodeketa: Injektore-zenbaki berriak ECUra kodetzen ditu.

7. Mantentzea

• Garbiketa: Erabili biguna, damp cloth with mild detergent to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
• Biltegiratzea: Store the device in its protective case in a dry, cool, and dust-free environment when not in use. Avoid direct sunlight or extreme temperatures.
• Software eguneraketak: Aldian-aldian egiaztatu ANCEL ofiziala website for available software updates to ensure optimal performance and compatibility with the latest vehicle models.

8. Arazoak

• Gailua ez da pizten:
  Ensure the OBD-II cable is securely connected to the vehicle's DLC. Verify the vehicle's ignition is in the ON position. Check the vehicle's battery for sufficient charge.
• Komunikazio errorea:
  Confirm the vehicle's ignition is ON and the engine is OFF. Ensure the OBD-II connector is firmly seated. Verify the vehicle is OBD-II compliant (1996 or newer).
• DTCs Not Clearing:
  Diagnostic Trouble Codes can only be cleared if the underlying fault has been rectified. Ensure the ignition is ON and the engine is OFF. If the issue persists, further diagnosis may be required.

9. Zehaztapenak

10. Bermea eta Laguntza

For technical support, product inquiries, or warranty information, please contact ANCEL customer service through their official channels. Details can typically be found on the ANCEL webgunean edo produktuaren ontzian.