Produktua amaituview
The Zendure SuperBase Pro 1500 is a portable power station designed to provide reliable power for various applications, from outdoor adventures to emergency home backup. It features a 1440 Wh capacity and a 1500W output, capable of powering a wide range of electronic devices and appliances.
1. irudia: Aurrealdea view of the Zendure SuperBase Pro 1500, showing the main display and control buttons.
Konfigurazio Gida
1. Unboxing eta Hasierako Ikuskapena
Carefully remove the SuperBase Pro 1500 from its packaging. Inspect the unit for any signs of damage during transit. Ensure all accessories listed in the packing list are present.
2. Hasierako kargatzea
Before first use, it is recommended to fully charge the SuperBase Pro 1500. Connect the provided AC charging cable to the AC input port on the unit and then to a standard wall outlet. The display will indicate the charging status and battery percentage.
- Charging time may vary based on the input power source.
- Bateriaren iraupen optimoa lortzeko, saihestu bateria guztiz hustea kargatu aurretik.
2. irudia: Aldea view of the SuperBase Pro 1500, highlighting the AC output ports and DC output port.
Funtzionamendu-argibideak
1. Piztu/Itzaltzea
To power on the unit, press and hold the main power button for approximately 3 seconds. The display will illuminate. To power off, press and hold the main power button again until the display turns off.
2. Pantaila ulertzea
LCD pantailak zentral elektrikoaren egoerari buruzko informazioa denbora errealean ematen du:
- Bateria maila: Uneko bateriaren ehunekoa erakusten dutage.
- Sarrerako potentzia: Indicates the power (in Watts) being drawn into the unit during charging.
- Irteera potentzia: Konektatutako gailuek kontsumitzen duten potentzia (wattetan) erakusten du.
- Remaining Runtime/Recharge Time: Estimates how long the unit can power devices or how long until fully charged.
- Port Status Indicators: Icons for AC, DC, USB, and other ports indicate if they are active.
3. Gailuak konektatzea
The SuperBase Pro 1500 offers various output ports:
- CA irteera: Press the AC power button to enable the AC outlets. Connect your AC-powered devices (e.g., laptops, small appliances) to these ports. Ensure the total power consumption does not exceed 1500W.
- DC irteera: Press the DC power button to enable the DC output ports. These are suitable for devices requiring 12V DC power.
- USB irteera: Connect USB-powered devices (e.g., smartphones, tablets) to the USB-A or USB-C (PD 100W, PD 20W) ports. These ports are typically always active when the unit is on.
4. Charging the SuperBase Pro 1500
The unit can be charged using multiple methods:
- AC hormako entxufea: Konektatu korronte alternoko kargatzeko kablea hormako entxufe estandar batera.
- Solar Panels (Optional): Connect compatible solar panels to the solar input port. Ensure the solar panel voltage eta korrontea zehaztutako mugen barruan daude.
- Car Charger (Optional): Use a car charger adapter to charge the unit from your vehicle's 12V cigarette lighter port.
Figure 3: The SuperBase Pro 1500 with its retractable handle extended for easy transport.
Mantentzea
1. Garbiketa
Regularly clean the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all ports are free of dust and debris.
2. Biltegiratzea
When storing the SuperBase Pro 1500 for extended periods, ensure it is charged to approximately 50-80% capacity. Store it in a cool, dry place, away from direct sunlight and extreme temperatures. Recharge the unit every 3-6 months to maintain battery health.
3. Bateria zaintzea
The SuperBase Pro 1500 uses a lithium-ion battery. To maximize its lifespan:
- Avoid frequent full discharges.
- Do not expose the unit to temperatures below -10°C (14°F) or above 45°C (113°F) for prolonged periods.
- If the unit will not be used for a long time, charge it to 80% every 3 months.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Unitatea ez da pizten. | Bateria guztiz agortuta dago. | Connect to an AC outlet and charge for at least 10 minutes before attempting to power on. |
| KA irteerarik ez. | Korronte alternoko irteera ez dago gaituta; gainkarga-babesa aktibatuta. | Press the AC power button to enable. Reduce the load on AC outlets; restart the unit. |
| DC irteerarik ez. | DC output not enabled; Overload protection activated. | Press the DC power button to enable. Reduce the load on DC outlets; restart the unit. |
| Unitatea ez da kargatzen. | Charging cable not properly connected; Input source issue. | Ensure all charging cables are securely connected. Verify the wall outlet or solar panel is functioning correctly. |
| Pantailak errore kode bat erakusten du. | Barne sistemaren errorea. | Note the error code and refer to the Zendure support webgunean edo jarri harremanetan bezeroarentzako zerbitzura laguntza lortzeko. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | SUPERBASE PRO |
| Edukiera | 1440 Wh |
| CA irteerako potentzia | 1500 Watts (Rated) |
| Bateria mota | Litio-ioi |
| Neurriak (L x W x H) | 50 x 50 x 28 cm |
| Pisua | 10.89 kg |
| liburukiatage | 1.5E+3 Volts (DC) |
| Kolorea | Beltza |
| UPC | 850020422692 |
Bermearen informazioa
Zendure products typically come with a limited warranty. For detailed information regarding the warranty period, coverage, and terms and conditions for your SuperBase Pro 1500, please refer to the warranty card included with your product or visit the official Zendure webgunea.
Gorde erosketa-froga berme-erreklamazioetarako.
Bezeroarentzako Arreta
For technical assistance, troubleshooting not covered in this manual, or service inquiries, please contact Zendure customer support.
Contact information and support resources can typically be found on the official Zendure webgunea:
- Zendure Official Support Page (Adibampesteka, benetakoa URL alda daiteke)
- Refer to the product packaging or included documentation for specific regional contact details.
