SONICAKE Levitate Digital Delay Reverb 2-in-1 Guitar Effects Pedal

Sarrera

The SONICAKE Levitate is a versatile dual-effect pedal combining carefully selected digital delay and plate reverb effects. This pedal is designed to enrich your sound with expansive ambient textures. It features independent control over dry and wet signals for the delay, a large schedulable decay time for the reverb, and convenient trail and tap tempo functions for live performance. A special buffer bypass circuit ensures your guitar's tone remains pristine.

Ezaugarri nagusiak

• Digital Delay/Plate Reverb: Two effects integrated into one compact guitar pedal.
• Extended Delay Time: Offers a maximum of 2000ms delay time.
• Adjustable Reverb Decay: Plate reverb features a large schedulable decay parameter.
• Performance Functions: Includes Trail and Tap Tempo functions for enhanced live show control.
• Buffer Bypass: Specially designed buffer bypass circuit maintains sound clarity.
• Power Requirement: Operates with a 9V center negative regular pedal power supply (not included).

Kontrolak eta Funtzioak

The Levitate pedal features intuitive controls for both its delay and reverb sections. Each effect can be activated independently or simultaneously.

Delay Section Controls

• HEZETUA: Adjusts the level of the delayed (wet) signal.
• LEHORRAK: Adjusts the level of the original (dry) signal.
• IRITZIA: Controls the number of delay repeats.
• ORDUA: Sets the delay time, up to 2000ms.
• DELAY Footswitch: Tap to switch the delay effect on/off. Hold to enter Tap Tempo mode.

Reverb Section Controls

• Erreberbazioa: Adjusts the overall level of the reverb effect.
• HAMARKADA: Erreberberazio-buztanaren luzera kontrolatzen du.
• REVERB oin etengailua: Tap to switch the reverb effect on/off. Hold to toggle the Trail function.

Ikusizko Overview Kontrolak

Irudia: Goitik behera view of the SONICAKE Levitate pedal with each control knob and footswitch clearly numbered for easy identification.

Konfigurazioa

1. Potentzia-konexioa: Connect a standard 9V DC center-negative power adapter (not included) to the DC 9V input jack on the pedal.
2. Sarrerako konexioa: Connect your guitar or other instrument to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. Irteerako konexioa: Konektatu pedalaren ezkerraldeko OUTPUT jack zurera amplifizatzailea edo zure seinale-kateko hurrengo pedala 1/4 hazbeteko instrumentu-kable estandar bat erabiliz.
4. Hasierako ezarpenak: Start with all knobs at the 12 o'clock position for a neutral starting point.

Power Input Diagram

Image: Diagram illustrating the DC 9V center negative power input requirement for the pedal.

Funtzionamendu-argibideak

Activating Effects

• To activate the Delay effect, tap the right footswitch. The LED will illuminate.
• To activate the Reverb effect, tap the left footswitch. The LED will illuminate.
• Both effects can be used simultaneously.

Tap Tempo Function (Delay)

• Hold down the DELAY footswitch for approximately 2 seconds until the LED starts flashing.
• Tap the DELAY footswitch two or more times at your desired tempo. The pedal will automatically set the delay time to match your taps.
• Hold the DELAY footswitch again to exit Tap Tempo mode.

Trail Function (Reverb)

• Hold down the REVERB footswitch for approximately 2 seconds until the LED flashes. This toggles the Trail function.
• When Trail is ON, the reverb tail will naturally decay even after the effect is disengaged.
• When Trail is OFF, the reverb will cut off immediately when the effect is disengaged.

Demonstration Video: SONICAKE Levitate Guitar Effects Pedal

Demonstration Video: Sonicake LEVITATE - Digital Delay Reverb 2 Effects in 1 Pedal

Mantentzea

• Mantendu pedala garbi zapi leun eta lehor batekin garbituz.
• Saihestu pedala tenperatura altuen, hezetasunaren edo eguzki-argiaren eraginpean jartzea.
• Do not attempt to disassemble or modify the pedal, as this will void the warranty.
• Ensure proper power supply (9V DC center-negative) to prevent damage.

Arazoak konpontzea

• Soinurik ez: Check all cable connections (input, output, power). Ensure the power supply is correctly connected and functioning. Verify that your instrument and amplifikatzaileak behar bezala funtzionatzen du.
• Soinu ahula edo distortsionatua: Check the battery (if applicable) or power supply. Ensure all cables are in good condition. Adjust the WET/DRY and REVERB/DECAY knobs to appropriate levels.
• Efektua ez da erakargarria: Ensure the footswitch is fully pressed and the corresponding LED illuminates.
• Nahi gabeko zarata: Try using a different power supply or isolating the pedal from other noisy equipment. Ensure all cables are shielded.

Zehaztapenak

Kutxan dagoena

• LEVITATE Guitar Pedal

Bermea eta Laguntza

For warranty information and customer support, please refer to the official SONICAKE webwebgunearekin edo jarri harremanetan zure saltzailearekin. Gorde erosketa-agiria erosketaren frogagiri gisa.