LANCOM R&S Unified Firewall UF-60 LTE Erabiltzailearen Eskuliburua

1. Sarrera

This manual provides essential information for the installation, operation, and maintenance of your LANCOM R&S Unified Firewall UF-60 LTE. Please read this manual thoroughly before using the device to ensure proper setup and functionality. Retain this document for future reference.

2. Segurtasun informazioa

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Ziurtatu gailua gainazal egonkor eta mailakatu batean jartzen dela.
• Ez jarri gailua hezetasunean, tenperatura altuetan edo eguzki-argiaren eraginpean.
• Erabili gailuarekin hornitutako korronte-egokigailua soilik.
• Ez ireki gailua casing. Konponketa guztiak langile kualifikatuen esku utzi.
• Mantendu aireztapen-zuloak garbi berotzea saihesteko.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• LANCOM R&S Unified Firewall UF-60 LTE device
• Elikatze-moldagailua
• Two LTE Antennas
• Ethernet kablea
• Hasierako gida azkarra

4. Gailua amaitu daview

Familiarize yourself with the physical components and indicators of the UF-60 LTE firewall.

Figure 4.1: Front Panel of LANCOM UF-60 LTE
This image displays the front panel of the LANCOM UF-60 LTE Unified Firewall. The device is white with two black external antennas connected at the rear, extending upwards. On the left side of the front panel, the 'LANCOM Systems' and 'ROHDE & SCHWARZ' logos are visible. On the right side, a series of LED indicators are present. These indicators include four for Ethernet ports (labeled ETH0, ETH1, ETH2, ETH3) and additional status indicators for LTE signal, Wi-Fi, and general system status.

4.1. Front Panel Indicators

• ETH0-ETH3 LEDs: Indicate activity and link status for the respective Ethernet ports.
• LTE LED: Shows the status of the LTE connection (e.g., signal strength, connection active).
• Sistemaren egoera LED: Indicates the overall operational status of the device.

4.2. Rear Panel Ports (Typical Configuration)

• Potentzia sarrera: Emandako korronte-egokigailura konektatzen da.
• Ethernet Ports (ETH0-ETH3): For connecting to your network devices (LAN) and WAN.
• LTE Antenna Connectors: For attaching the external LTE antennas.
• SIM txartelaren zirrikitua: For inserting a SIM card for LTE connectivity.
• Berrezarri botoia: Fabrika-ezarpen lehenetsiak berrezartzeko erabiltzen da.

5. Konfigurazioa

5.1. Hardware-instalazioa

1. Lotu antenak: Screw the two LTE antennas onto the connectors at the rear of the device.
2. Sartu SIM txartela: Open the SIM card slot cover and insert a valid SIM card. Ensure correct orientation.
3. Konektatu sareko kableak:
   • Connect your internet source (e.g., modem) to the designated WAN Ethernet port (typically ETH0).
   • Connect your local network devices (e.g., computer, switch) to the LAN Ethernet ports (ETH1-ETH3).
4. Konektatu energia: Plug the power adapter into the device's power input and then into an electrical outlet. The device will power on automatically.

5.2. Hasierako konfiguraziorako sarbidea

After powering on, wait for the system status LED to indicate readiness (refer to the Quick Start Guide for specific LED patterns).

1. Ensure your computer is connected to one of the LAN ports (ETH1-ETH3) of the firewall.
2. Ireki a web arakatzailea eta sartu IP helbide lehenetsia (adibidez, http://192.168.1.1) or the hostname of the device.
3. Follow the on-screen instructions to complete the initial setup wizard, which typically includes setting up administrator credentials, network settings, and basic firewall rules.

6. Gailuaren funtzionamendua

The LANCOM R&S Unified Firewall UF-60 LTE operates primarily through its web-based management interface. This interface allows for comprehensive configuration and monitoring.

6.1. Accessing the Management Interface

To access the management interface:

1. Ensure your computer is connected to the firewall's network.
2. Ireki a web browser and navigate to the device's IP address or hostname.
3. Enter your administrator username and password.

6.2. Key Features and Configuration Areas

• Sarearen konfigurazioa: Manage WAN (LTE, Ethernet), LAN, VLANs, and routing.
• Firewall arauak: Define security policies, access control lists, and intrusion prevention.
• VPN: Configure Virtual Private Network connections for secure remote access or site-to-site links.
• LTE Management: Monitor LTE signal strength, data usage, and connection status.
• Sistemaren ezarpenak: Manage user accounts, firmware updates, backups, and logging.

7. Mantentzea

7.1. Firmware eguneraketak

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically performed via the web management interface under the 'System' or 'Maintenance' section. Always back up your configuration before performing a firmware update.

7.2. Garbiketa

Clean the device periodically with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.

7.3. Configuration Backup

It is recommended to regularly back up your device configuration. This allows for quick restoration of settings in case of an issue or when migrating to a new device.

8. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei heltzen die.

• Potentziarik gabe:

  Ensure the power adapter is securely connected to both the device and a working electrical outlet. Verify the power outlet is functional.

• No Internet Connection (Ethernet WAN):

  Check the Ethernet cable connection between the firewall's WAN port and your modem/internet source. Verify that your modem is operational and receiving an internet signal. Check WAN configuration in the management interface.

• No Internet Connection (LTE):

  Ensure the SIM card is correctly inserted and active. Check LTE antenna connections. Verify LTE signal strength and connection status in the management interface. Contact your mobile network provider if the SIM card or service is suspected to be the issue.
• Ezin da Kudeaketa Interfazea atzitu:

  Verify your computer is connected to a LAN port of the firewall. Ensure your computer's IP settings are set to obtain an IP address automatically (DHCP). Try clearing your browser's cache or using a different browser. If the IP address was changed, use the new address. If all else fails, a factory reset might be necessary (refer to the Quick Start Guide for reset procedure).

9. Zehaztapen Teknikoak

Note: Specifications are subject to change without notice. For the most current information, please refer to the manufacturer's official website. The "Connectivity Technology: HDMI" might be a misclassification in the source data, as firewalls typically use Ethernet for primary network connectivity.

10. Bermea eta Laguntza

10.1. Bermearen informazioa

The LANCOM R&S Unified Firewall UF-60 LTE comes with a manufacturer's warranty. Specific warranty terms and conditions, including duration and coverage, are provided by Lancom Systems. Please refer to the warranty card included with your product or visit the official Lancom Systems webinformazio zehatza lortzeko gunea.

10.2. Laguntza Teknikoa

For technical assistance, product registration, or to download the latest drivers and firmware, please visit the official support portal of Lancom Systems. You may also find FAQs and additional resources there to help resolve common issues.

Fabrikatzailea Webgunea: www.lancom-systems.com