Sarrera
The Tiger Tool 15019 Pin and Bushing Adapter is designed to facilitate the removal and installation of pins and bushings in heavy-duty semi-trucks and equipment. This adapter is intended for use with the existing Tiger Tool 15000 Pin & Bushing Starter Kit. It allows for maintenance to be performed while the suspension remains on the vehicle, enhancing efficiency and convenience. The robust construction and corrosion-resistant finish ensure durability and reliability in demanding workshop environments.
Produktua amaituview
Image: The Tiger Tool 15019 Pin and Bushing Adapter components, including various sized adapters and a threaded rod.
The 15019 Adapter is engineered from high-grade metals and features a protective black oxide coating for enhanced durability and resistance to corrosive environments. It is specifically designed to integrate seamlessly with the Tiger Tool 15000 Pin & Bushing Starter Kit.
Image: A visual reminder that the Pin & Bushing Starter Kit is required and not included with this adapter.
Ohar garrantzitsua: The Tiger Tool 15019 Pin and Bushing Adapter requires the Tiger Tool 15000 Pin & Bushing Starter Kit to operate. This adapter is an accessory to the main starter kit.
Konfigurazioa
Before beginning any operation, ensure you have the complete Tiger Tool 15000 Pin & Bushing Starter Kit along with the 15019 Adapter. Always wear appropriate personal protective equipment, including safety glasses and gloves.
- Identify Bushing: Determine the specific pin and bushing to be serviced. Refer to the compatibility list in the Specifications section to ensure the 15019 Adapter is suitable for your application.
- Lan-eremua prestatu: Ensure the vehicle is stable and secured. The design of the Tiger Tool system allows for servicing while the suspension remains on the vehicle, eliminating the need for extensive disassembly.
- Muntatu tresna: Select the appropriate components from your 15000 Starter Kit and the 15019 Adapter. The system typically involves a threaded rod, a hydraulic cylinder (from the starter kit), and various adapters/receivers.
- Lubricate Components: Apply appropriate lubricant to the threaded rod and other moving parts of the tool to ensure smooth operation and prevent wear.
Funtzionamendu-argibideak
The following steps outline the general procedure for using the Tiger Tool 15000 Pin & Bushing Starter Kit with the 15019 Adapter for bushing removal and installation. Always refer to the detailed instructions provided with your complete starter kit for specific application guidance.
Butxak kentzea
- Kokatu tresna: Insert the threaded rod through the bushing to be removed. Attach the appropriate receiver and adapter from the 15000 Starter Kit and 15019 Adapter to securely engage the bushing and the suspension component.
- Connect Hydraulic Pump: Connect the hydraulic cylinder (from the starter kit) to the threaded rod and attach an air/hydraulic pump (e.g., OTC 2510A or similar, not included).
- Aplikatu presioa: Slowly apply hydraulic pressure using the pump. The hydraulic force will press the bushing out of its housing. Monitor the process to ensure smooth and controlled removal.
- Complete Removal: Continue applying pressure until the bushing is fully extracted. Release the hydraulic pressure and disassemble the tool components.
Video: Demonstration of the Tiger Tool 15019 Bushing Adapter in action, showing the removal process of a hanger bushing. (Source: Tiger Tool)
Buruen Instalazioa
- Prepare New Bushing: Ensure the new bushing is clean and free of debris. Apply a thin layer of appropriate lubricant to the outer surface of the new bushing.
- Position New Bushing: Place the new bushing into the housing, aligning it correctly.
- Assemble for Installation: Reassemble the threaded rod, hydraulic cylinder, and appropriate adapters/receivers from the 15000 Starter Kit and 15019 Adapter to facilitate the installation of the new bushing.
- Aplikatu presioa: Slowly apply hydraulic pressure. The hydraulic force will press the new bushing into its housing. Ensure the bushing is pressed in straight and fully seated.
- Instalazio osoa: Continue applying pressure until the bushing is fully installed. Release the hydraulic pressure and disassemble the tool components.
Bideoa: Amaitu daview of the Tiger Tool Pin & Bushing Service System, demonstrating the general process of removal and installation using a starter kit and adapter. (Source: Tiger Tool)
Bideoa: Orokorra amaitu daview of the Pin & Bushing System, illustrating its components and how they work together for servicing. (Source: Tiger Tool)
Mantentzea
To ensure the longevity and optimal performance of your Tiger Tool 15019 Pin and Bushing Adapter, follow these maintenance guidelines:
- Garbiketa: After each use, clean all components thoroughly to remove dirt, grease, and debris.
- Lubrifikazioa: Periodically lubricate threaded parts and moving components with a suitable lubricant to prevent rust and ensure smooth operation.
- Biltegiratzea: Store the adapter and all components of the starter kit in their designated case in a dry, clean environment to protect them from moisture and damage.
- Ikuskapena: Regularly inspect the adapter for any signs of wear, damage, or corrosion. Replace any worn or damaged parts immediately to maintain safety and effectiveness.
Arazoak konpontzea
If you encounter any issues while using the Tiger Tool 15019 Pin and Bushing Adapter, consider the following:
- Difficulty in Removal/Installation: Ensure all components are correctly aligned and adequately lubricated. Verify that the hydraulic pump is functioning correctly and providing sufficient pressure.
- Osagaien kalteak: Stop operation immediately if any component shows signs of stress or damage. Do not use damaged tools.
- Incorrect Adapter: Double-check that you are using the correct adapter for the specific pin and bushing being serviced. Refer to the compatibility list.
For further assistance or persistent issues, please contact Tiger Tool customer support.
Zehaztapenak
| Atributua | Xehetasuna |
|---|---|
| Modelo zenbakia | 15019 |
| Marka | Tigre tresna |
| Elementuaren pisua | 5 kilo |
| Produktuaren neurriak | 26 x 3 x 3 hazbete |
| Materiala | High-grade metals with black oxide coating |
| Bateragarritasuna | Requires Tiger Tool 15000 Pin & Bushing Starter Kit |
Compatible OEM Bushing Numbers
- Automann: MR752, MR752UB
- Clevite: 836540
- Dallas: RB253
- Dayton: RB-253
- Dyco: DT1807
- Euclid: 34511
- Flagg: RB253
- Ford: 4C4O5348BA, 4C4Z5348BA
- Gaff: GAFF34511
- Gaumers: 04253
- Hendrickson: 51648, 51648000
- International: 3525665C1
- Navistar: 3525665C1
- MPN: RB-253
- Uro: TD5510
Bermea eta Laguntza
Tiger Tool is committed to quality and customer satisfaction. This product is proudly made in North America, reflecting a dedication to exceptional performance and reliability. For any questions, technical support, or warranty inquiries, please refer to the contact information provided on the official Tiger Tool webgunea edo produktuaren ontziak.
