Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator User Manual

1. Sarrera

This manual provides comprehensive instructions for the safe and effective use of the Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator, model ID-C0550NXB. This precision instrument is designed for accurate linear measurements and features a clear digital display, tolerance judgment capabilities, and data output functionality. Please read this manual thoroughly before operating the device to ensure proper handling and to maximize its performance and longevity.

2. Segurtasun informazioa

Observe the following safety precautions to prevent injury and damage to the instrument:

• Handle the indicator with care. Avoid dropping or subjecting it to strong impacts.
• Do not disassemble or modify the instrument. Unauthorized modifications can lead to malfunction and void the warranty.
• Keep the instrument away from direct sunlight, high temperatures, high humidity, and excessive dust.
• Avoid exposing the instrument to strong magnetic fields or static electricity.
• Use only the specified battery type if replacement is required.
• Ensure the measuring surface is clean before taking measurements to maintain accuracy.

3. Produktua amaitu daview

The Mitutoyo 543-730B is a high-precision digital indicator designed for various measurement applications. It features an ABSOLUTE encoder, eliminating the need for zero-setting after power-on or battery replacement. The clear LCD displays measurements and an analog bar for quick visual reference.

1. irudia: Mitutoyo 543-730B ABSOLUTE Digimatic Digital Indicator. The image shows the main unit with its digital display, control buttons (MODE, ZERO/SET, PRESET/ABS, DATA, ON/OFF), and the measuring spindle extending downwards.

Funtsezko osagaiak:

• LCD pantaila digitala: Shows measurement values, units (mm/inch), and an analog bar indicator.
• MODE Button (F1): Used to switch between various display modes or functions.
• ZERO/SET Button (F2): Sets the current position to zero or confirms settings.
• PRESET/ABS Button: Toggles between ABSOLUTE and incremental measurement modes, or sets a preset value.
• DATA Button (F3): Used for data output to external devices.
• ON/OFF botoia: Unitatea pizten edo itzaltzen du.
• Measuring Spindle: The movable rod that contacts the workpiece for measurement.
• Zurtoina: The cylindrical part used for mounting the indicator.

4. Konfigurazioa

4.1 Battery Installation (If Required)

The indicator typically comes with a battery pre-installed. If battery replacement is necessary:

1. Carefully remove the battery cover, usually located on the back or side of the unit.
2. Insert a new SR44 (or equivalent) silver oxide button cell battery with the positive (+) side facing up.
3. Jarri bateriaren estalkia ongi.

4.2 Adierazlea muntatzea

Mount the indicator securely using its stem into a suitable stand or fixture. Ensure the mounting is rigid to prevent any movement during measurement, which could affect accuracy.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzali

• Pizteko, sakatu ON/OFF botoia.
• Itzaltzeko, luze sakatu ON/OFF button until the display turns off. The ABSOLUTE position is retained even when powered off.

5.2 Zeroa ezartzea

The ABSOLUTE system eliminates the need for repeated zero-setting. However, for incremental measurements:

1. Bring the measuring spindle into contact with the reference surface or workpiece.
2. Sakatu ZERO/EZARRI button to set the display to zero at that position.

5.3 ABSOLUTE and Incremental Modes

Sakatu PRESET/ABS button to toggle between ABSOLUTE (ABS) and incremental (INC) measurement modes. In ABS mode, the origin is maintained even after power off. In INC mode, you can set a temporary zero at any point.

5.4 Unitateen bihurketa (mm/hazbete)

Sakatu MODUA button to cycle through available display options, which may include unit conversion between millimeters (mm) and inches (in), depending on the model configuration.

5.5 Tolerance Judgment

This indicator allows for Go/No-Go judgments by setting upper and lower tolerance limits. Refer to the detailed instructions in the full product manual for setting these limits using the MODUA eta ZERO/EZARRI buttons. The analog bar indicator assists in visualizing the measurement relative to these limits.

5.6 Datuen irteera

The indicator is equipped with a data output port. To transmit measurement data to an external device (e.g., computer, data processor), connect a compatible Mitutoyo data cable to the port and press the DATUAK button. Ensure the receiving device is properly configured to accept data.

6. Mantentzea

6.1 Garbiketa

Wipe the instrument with a soft, dry cloth. For stubborn dirt, a cloth lightly dampened with a neutral detergent may be used, followed by a dry wipe. Do not use organic solvents (e.g., thinner, benzene) as they may damage the finish or internal components.

6.2 Biltegiratzea

Store the indicator in its original case or a protective container in a clean, dry environment, away from direct sunlight, extreme temperatures, and humidity. Ensure the measuring spindle is retracted or protected to prevent damage.

6.3 Bateria ordezkatzea

Replace the battery when the low battery indicator appears on the display or when the display becomes dim or unresponsive. Refer to section 4.1 for battery installation instructions. Dispose of used batteries according to local regulations.

7. Arazoak

8. Zehaztapenak

9. Bermea eta Laguntza

Mitutoyo products are manufactured to high standards and typically come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Mitutoyo website. For technical support, service, or inquiries regarding your Mitutoyo 543-730B Digital Indicator, please contact your local Mitutoyo distributor or customer service center. Contact information can usually be found on the official Mitutoyo webgunea: www.mitutoyo.com.