Sarrera
This manual provides detailed instructions for the ROCAM 1018i Loud Digital Alarm Clock. Please read this manual carefully before using the product to ensure proper operation and to maximize its features. Keep this manual for future reference.
Figure 1: ROCAM 1018i Loud Digital Alarm Clock (Black)
Ezaugarri nagusiak:
- 8.7-inch LED Digital Display with Mirror Effect
- Alarma bikoitzaren funtzionalitatea
- Adjustable Brightness (7 levels)
- Adjustable Alarm Volume (7 levels, 92dB to 110dB)
- Snooze Function (9 minutes)
- Includes Bed Shaker for heavy sleepers
- 12/24 orduko denbora bistaratzea
- USB kargatzeko ataka (5V 1A)
- DC Adapter and Backup Battery included
Konfigurazioa
1. Despaketatzea eta Hasierako Ikuskapena
Kontu handiz atera osagai guztiak paketetik. Ziurtatu elementu hauek daudela:
- ROCAM 1018i Digital Alarm Clock
- DC korronte egokitzailea
- USB kargatzeko kablea
- Bed Shaker (bibragailua)
- Erabiltzailearen eskuliburua (dokumentu hau)
Inspect the clock for any visible damage. If any components are missing or damaged, contact customer support.
2. Energia-konexioa
- Connect the DC power adapter to the power input port on the back of the alarm clock.
- Plug the DC power adapter into a standard electrical outlet. The clock display will illuminate.
- The alarm clock requires continuous power to operate. The included button cell battery serves as a backup to retain time and alarm settings during a power outage, but the display will not be active.
Figure 2: Power connection and USB charging port. The clock requires a DC adapter for operation.
3. Babes-filma kentzea
A protective film is applied to the mirror surface of the display. Gently peel off this film to reveal a clear mirror surface.
Funtzionamendu-argibideak
1. Ordua ezartzea
Refer to the buttons on the back or top of the clock. Typically, there is a "TIME SET" or similar button. Press and hold this button, then use the "+" or "-" buttons to adjust hours and minutes. Press "TIME SET" again to confirm.
To switch between 12-hour and 24-hour (military) time format, locate the "12/24H" button and press it.
Figure 3: The clock supports both 12-hour and 24-hour time display formats.
2. Alarmak ezartzea (Alarma bikoitza)
The clock supports two independent alarms (Alarm 1 and Alarm 2).
- Press the "ALARM 1" button (or "ALARM 2" for the second alarm). The alarm time will flash.
- Use the "+" or "-" buttons to set the desired alarm hour and minute.
- Press "ALARM 1" (or "ALARM 2") again to confirm the time.
- After setting the time, you can usually select the alarm mode (sound, vibrator, or both) and volume. Refer to the specific buttons for these settings, often labeled "MODE" or "VOL".
Figure 4: The dual alarm feature allows setting two distinct wake-up times.
3. Alarm Modes and Volume
The ROCAM 1018i offers three alarm modes:
- Alarm Sound Only: The clock will emit an audible alarm.
- Bed Shaker Only: The connected bed shaker will vibrate.
- Alarm Sound & Shaker: Both the audible alarm and bed shaker will activate simultaneously.
To select the alarm mode, press the "MODE" button after setting the alarm time. The alarm volume can be adjusted from 92 dB to 110 dB across 7 levels using the "VOL" or "+"/"-" buttons when the alarm is active or in setup mode.
Figure 5: Choose from three alarm modes for personalized wake-up experience. The bed shaker cable is approximately two meters long.
4. Errepikapen funtzioa
When an alarm sounds, press the large "SNOOZE" button located on the top of the clock. The alarm will pause for 9 minutes and then sound again. You can repeat the snooze function multiple times.
Figure 6: The convenient snooze button provides an additional 9 minutes of sleep.
5. Pantailaren distira doitzea
The LED display brightness can be adjusted to 7 levels to suit your preference, day or night. Locate the "DIMMER" or "BRIGHTNESS" button (often represented by a sun icon) and press it repeatedly to cycle through the brightness levels.
Figure 7: The display brightness can be adjusted across 7 levels for optimal visibility in any lighting condition.
6. USB kargatzeko ataka
The alarm clock features a 5V 1A USB charging port on the side. You can use this port to charge small electronic devices such as smartphones, smartwatches, or earphones. Connect your device's USB charging cable to this port.
Note: This port is for charging only and does not support data transfer.
Mantentzea
1. Garbiketa
To clean the alarm clock, gently wipe the surface with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.
Ensure the clock is unplugged from the power outlet before cleaning.
2. Battery Replacement (Backup Battery)
The alarm clock uses a Lithium-metal button cell battery (included) for backup power. This battery retains time and alarm settings during a power outage. If the clock consistently loses settings after a power interruption, the backup battery may need replacement. Refer to the battery compartment on the back of the unit for replacement instructions. Use only the specified battery type.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Erlojuaren pantaila itzalita dago. | Ez dago elikadura hornidurarik. | Ensure the DC power adapter is securely plugged into the clock and a working electrical outlet. |
| Alarmak ez du jotzen/bibratzen. | Alarm not activated, volume too low, or incorrect mode selected. | Verify alarm is set and enabled. Check alarm volume. Ensure correct alarm mode (sound, shaker, or both) is selected. Check bed shaker connection. |
| Time/settings are lost after power outage. | Babeskopiako bateria agortuta edo falta da. | Replace the Lithium-metal button cell backup battery. Ensure it is correctly installed. |
| USB kargatzeko ataka ez dabil. | Device not compatible, cable faulty, or clock not powered. | Ensure the clock is powered. Try a different USB cable and device. The port provides 5V 1A. |
| Pantaila oso distiratsua/iluna da. | Brightness setting is not optimal. | Press the "DIMMER" or "BRIGHTNESS" button to adjust through the 7 available levels. |
Zehaztapenak
| Modelo zenbakia | 1018i |
| Marka | ROCAM |
| Bistaratzeko mota | LED digitala (8.7 hazbetekoa) |
| Kolorea | Beltza |
| Produktuaren neurriak | Approx. 20.6 cm (W) x 9.2 cm (H) x 3.81 cm (D) |
| Pisua | Gutxi gorabehera. 130 g |
| Energia iturria | DC Adapter (Mains Powered) |
| Backup Bateria | 1 x Lithium-metal battery (included) |
| Alarmaren bolumena | 7 levels, 92 dB to 110 dB |
| Pantailaren distira | 7 maila erregulagarri |
| USB irteera | 5V 1A |
| Ezaugarri bereziak | Large screen, Snooze, Dual Alarm, Bed Shaker, USB Charging Port |
Bermearen informazioa
ROCAM offers an 18-month warranty for this product from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Bermearen erreklamazioetarako, gorde erosketaren egiaztagiria.
Bezeroarentzako Arreta
If you have any questions, encounter issues with your ROCAM 1018i Loud Digital Alarm Clock, or require technical assistance, please contact our customer support team.
Contact information for support is typically provided on the product packaging or through the retailer where the product was purchased. Please have your model number (1018i) and purchase details ready when contacting support.
We also offer a 30-day free return policy. For returns, please follow the procedure of your retailer.
