1. Sarrera
The Sans HEPA 13 Air Purifier is designed to provide cleaner, healthier air in your home or workplace. It features advanced filtration technology to effectively remove airborne particles and improve indoor air quality.
Ezaugarri nagusiak:
- Estaldura zabala: Purifies air in spaces up to 1560 sq. ft. every hour.
- Iragazte sistema aurreratua: Equipped with a pre-filter, medical-grade HEPA 13 filter, activated carbon filter, and a powerful internal UV-C light.
- Babes integrala: Removes over 99.9% of particles down to 0.1 microns, including pollutants, allergens, dust, dander, harmful chemicals, gases, odors, and smoke.
- Funtzionamendu isila: Designed for ultra-quiet performance, especially in sleep mode.
- Smart Auto-Mode: Utilizes precise sensors to measure air quality and automatically adjusts fan settings for optimal purification and energy efficiency.
- Air Quality Display: Features an easy-to-read display showing the Air Quality Index (AQI) in real-time.
2. Konfigurazioa
- Deskonprimitu arazgailua: Carefully remove the air purifier from its packaging. Ensure all packing materials are removed.
- Kokalekua: Place the air purifier on a flat, stable surface in the desired room. For optimal performance, ensure there is adequate space around the air intake and outlet vents.
- Iragazkien instalazioa: The filter is typically pre-installed but may require removal of protective packaging. Refer to the 'Maintenance' section for detailed filter access instructions. Ensure the filter is correctly seated before closing the cover.
- Potentzia-konexioa: Entxufatu korronte-kablea entxufe elektriko estandar batean.
3. Funtzionamendu-argibideak
The Sans HEPA 13 Air Purifier features an intuitive control panel located on the top of the unit.
- Piztu/Itzali: Sakatu ON/OFF botoia unitatea pizteko edo itzaltzeko.
- Modu aukeraketa: Sakatu MODUA button to cycle through different operating modes: Auto, Low, Medium, High.
- Modu automatikoa: In Auto-Mode, the purifier uses precise sensors to detect real-time air quality and automatically adjusts the fan speed to maintain optimal air purification.
- Tenporizadorearen funtzioa: Erabili tenporizadorea button to set the operating duration (e.g., 2, 4, or 8 hours). The unit will automatically shut off after the set time.
- Argiaren kontrola: The ARGIA button controls the ambient light feature. Press to turn the light on or off.
- Lo egiteko modua: When activated, Sleep Mode operates the purifier at its lowest, quietest setting and turns off all display lights to ensure an undisturbed sleeping environment.
- Airearen kalitatearen adierazlea (AQI): The digital display shows the current Air Quality Index (AQI) in your space. A lower number indicates cleaner air. The color of the top light ring may also change to reflect air quality (e.g., blue for good, red for poor).
- UV-C Argia: The internal UV-C light provides an additional layer of air purification. It can be toggled on or off via the control panel.
Produktuaren bideo ofiziala:
4. Mantentzea
Regular maintenance ensures the longevity and optimal performance of your Sans HEPA 13 Air Purifier.
Iragazkiaren ordezkoa:
The air purifier is equipped with a filter replacement indicator that will illuminate when it's time to change the filter. It is generally recommended to replace the filter every 3 months, depending on usage and air quality.
- Itzali: Always turn off and unplug the air purifier before performing any maintenance.
- Iragazkiaren konpartimenturako sarbidea: Locate the filter access panel, typically on the back or bottom of the unit. Open the panel by pressing the release tab or rotating the base as indicated in the diagram.
- Kendu iragazki zaharra: Carefully pull out the used filter by its tabs. Dispose of the old filter responsibly.
- Iragazki berria instalatu: Remove the new filter from its protective packaging. Insert the new filter into the compartment, ensuring it is seated correctly.
- Itxi panela: Itxi ondo iragazkiaren sarbide-panela.
- Berrezarri iragazkien adierazlea: After replacing the filter, press and hold the filter reset button (often combined with another function button) for a few seconds until the indicator light turns off.
Kanpoaldea garbitzea:
Garbitu aire-arazgailuaren kanpoaldea oihal leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
5. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Unitatea ez da pizten | No power; power cord not properly connected. | Ziurtatu kablea ondo konektatuta dagoela funtzionatzen duen entxufe batera. Egiaztatu etengailua. |
| Airearen arazketa-errendimendu eskasa | Clogged filter; incorrect mode setting. | Replace the filter if the indicator is on. Select a higher fan speed or Auto-Mode. |
| Ezohiko zarata | Oztopoa haizagailuan; unitatea ez dago gainazal egonkor batean. | Turn off and unplug the unit. Check for any foreign objects. Place on a stable surface. |
| Air Quality Index (AQI) remains high | High level of pollutants; unit not running long enough. | Allow the unit to run longer, especially in Auto-Mode. Ensure proper room size coverage. |
6. Zehaztapenak
- Modelo zenbakia: Sans Purificatore d'aria HEPA 13
- Produktuaren neurriak: 10" L x 11.5" W x 20" H
- Elementuaren pisua: 14 kilo
- Energia iturria: Kable elektrikoa
- Kolorea: Gauerdia
- Iragazki mota: Pre-Filter, Medical Grade HEPA 13, Activated Carbon, UV-C Light
- Estaldura-eremua: Up to 1560 sq. ft. per hour
7. Bermea eta Laguntza
For warranty information and customer support, please refer to the product packaging or contact Sans customer service directly. Keep your purchase receipt for warranty claims.
