Godox XProII-S TTL Wireless Flash Trigger for Sony User Manual

1. Bukatu daview

The Godox XProII-S is a TTL wireless flash trigger specifically designed for Sony cameras. It offers advanced features for controlling lighting in flash photography, including TTL autoflash, 1/8000s High-Speed Sync (HSS), and a robust 2.4G wireless system. This manual provides comprehensive instructions for the setup, operation, and maintenance of your XProII-S trigger, ensuring you can achieve professional lighting results with ease.

Ezaugarri nagusiak:

• TTL Autoflash and Manual Flash Modes
• 1/8000s High-Speed Sync (HSS) and Second-Curtain Sync
• TCM (TTL-Convert-Manual) Function for efficient workflow
• Integrated 2.4GHz Godox Wireless System for reliable control
• Bluetooth Connectivity for remote control via Godox Flash App
• New Quick-Release Lock for secure and easy mounting
• SCAN Function for automatic channel selection

Figure 1.1: The Godox XProII-S TTL Wireless Flash Trigger, a versatile tool for Sony camera users.

Figure 1.2: The XProII-S features an upgraded control system for an intuitive, efficient, and professional lighting experience.

2. Konfigurazioa

2.1 Bateriaren instalazioa

The XProII-S requires two AA batteries (not included). To install:

1. Bilatu bateriaren konpartimentuaren estalkia unitatearen behealdean.
2. Lerratu estalkia ireki.
3. Insert the two AA batteries, ensuring correct polarity as indicated inside the compartment.
4. Itxi bateriaren konpartimenduaren estalkia ondo.

2.2 Kameraren oinetakoan muntatzea

To attach the XProII-S to your Sony camera:

1. Irristatu abiarazlearen zapata-oina kameraren zapatan.
2. Push the quick-release lock lever forward until it clicks into place, securing the trigger firmly to the camera.

Figure 2.1: The quick-release lock ensures the trigger is securely mounted on the camera's hotshoe.

2.2. irudia: Zehaztutako irudia view of the quick-release lock, designed for efficient and convenient attachment.

2.3 Piztu/Itzali

Press and hold the power button located on the side of the unit to turn the XProII-S on or off.

2.4 Hasierako ezarpenak

Upon first use or after a factory reset, you may be prompted to configure basic settings. Follow the on-screen instructions to set parameters such as language and time. Navigate through menus using the control dial and confirm selections with the SET button.

2.5 Haririk gabeko parekatzea

The XProII-S utilizes a 2.4GHz Godox Wireless System. To establish communication with compatible flash units:

1. Ensure both the XProII-S and the flash unit are powered on.
2. Set the same Kanala (CH), Taldea (GR), and Haririk gabeko IDa (ID) on both the trigger and the flash unit. The XProII-S supports 32 channels and either 5 or 16 groups (selectable in the menu), with 99 wireless ID settings (OFF, 01-99).
3. Once settings match, the units will automatically pair.

3. Funtzionamendu-argibideak

3.1 Basic Flash Modes

• TTL flash automatikoa: The trigger supports Through-The-Lens (TTL) autoflash, allowing the camera to automatically determine the correct flash output for optimal exposure.
• Eskuzko flasha: For precise control, adjust the flash output power manually. This mode is ideal for consistent lighting in controlled environments.
• Abiadura Handiko sinkronizazioa (HSS): Achieve shutter speeds up to 1/8000s. This is useful for freezing fast motion or using wide apertures in bright ambient light conditions.
• Bigarren gortinako sinkronizazioa: Synchronize the flash with the closing of the shutter curtain. This creates a natural-looking light trail behind moving subjects.
• Stroboscopic Flash: Fire multiple flashes during a single exposure to capture sequential motion of a subject.

Figure 3.1: The extra-large LCD screen provides a real-time display of remote flash settings.

Figure 3.2: The XProII-S supports HSS (High-Speed Sync) up to 1/8000s and TTL (Auto Flash) modes.

3.2 Funtzio aurreratuak

• TCM (TTL-Convert-Manual) Function: This two-way function allows instant conversion from TTL mode to Manual mode with retained parameters, and back again. This streamlines your workflow by allowing you to fine-tune manual settings based on an initial TTL reading without repetition.

Figure 3.3: TCM mode allows for quick conversion of TTL settings to manual power for fine adjustments.

• Bluetooth Connectivity & Godox Flash App: The XProII-S features built-in Bluetooth. Download the Godox Flash App on your iPhone, Android smartphone, or tablet to remotely adjust lighting parameters with a clear and user-friendly interface.

Figure 3.4: Control your XProII-S and connected flashes remotely using the Godox Flash App via Bluetooth.

• ESKANEATU funtzioa: In environments with potential signal interference, activate the SCAN function. The XProII-S will automatically search for and suggest spare channels and IDs, helping to avoid interference and improve connection stability.

Figure 3.5: Use the SCAN function to find the most stable wireless channel in busy environments.

• Flasharen Esposizioaren Konpentsazioa (FEC): Adjust flash output by ±3 EV in 1/3 EV increments to fine-tune exposure.
• ZOOM Setting: Control the zoom value of compatible flash units directly from the transmitter, from AUTO or 24mm to 200mm.
• L ereduaamp Kontrola: Enable or disable the modeling lamp on compatible flash units directly from the XProII-S.
• Beeper Control: Turn the beeper sound on or off for compatible flash units.
• Wireless Shutter: When used with an optional X1R-S receiver (sold separately) and a 2.5mm sync cord, the XProII-S can remotely trigger your camera's shutter.
• Sekonic Light Meter Integration: The XProII-S can integrate with Sekonic L-858 light meters (equipped with a built-in Godox 2.4G module) to adjust flash parameters directly after metering, enhancing precision and convenience.

Figure 3.6: The XProII-S can be used in conjunction with a Sekonic L-858 light meter for precise flash control.

Figure 3.7: The L-858 mode allows the light meter to prioritize control over connected lights.

4. Mantentzea

4.1 Garbiketa

Use a soft, dry cloth to clean the exterior of the XProII-S. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish or internal components.

4.2 Bateria zaintzea

If the trigger will not be used for an extended period, remove the AA batteries to prevent potential leakage and damage to the unit.

4.3 Firmware berritzea

Godox periodically releases firmware updates to improve performance and add new features. Check the official Godox website for the latest firmware. Upgrades can be performed via the Type-C USB port on the side of the unit.

5. Arazoak

If you encounter issues with your XProII-S, refer to the following common problems and solutions:

• Trigger not firing flash:
  • Ensure the XProII-S is securely mounted on the camera's hotshoe.
  • Check that both the trigger and the flash unit have sufficient battery power.
  • Verify that the flash unit is powered on and properly paired (same channel, group, and wireless ID).
  • Confirm the camera's flash settings are correctly configured.
• Flasharen irteera ez-koherentea:
  • Check for potential signal interference; use the SCAN function to find a clear wireless channel.
  • Ensure the flash unit is within the effective transmission range (approximately 0-100m).
  • Verify battery levels in both the trigger and the flash unit.
• Bluetooth konexio arazoak:
  • Ensure Bluetooth is enabled on both the XProII-S and your smart device.
  • Restart the Godox Flash App and the XProII-S.
  • Check for updates to the Godox Flash App.
• LCD pantaila ez da behar bezala bistaratzen:
  • Restart the trigger.
  • Egiaztatu bateriaren mailak.
  • If the issue persists, contact Godox customer support.

6. Zehaztapenak

7. Bermea eta laguntza

For detailed warranty information, product registration, and technical support, please refer to the warranty card included with your product or visit the official Godox webgunea. Gomendagarria da erosketa-agiria gordetzea erosketaren frogagiri gisa, berme-erreklamazioetarako.