Domus Line 2011619

Domus Line Recessed Housing for Call Me Remote Control

Eredua: 2011619

Produktua amaituview

The Domus Line Recessed Housing Kit is an essential accessory designed for the 'Call Me' remote control. This kit provides a clean and integrated solution for installing both round and square 'Call Me' remote controls flush with a surface, ensuring a seamless aesthetic. It is crafted from durable plastic with a stainless steel effect finish, blending well with various interior designs.

Domus Line Recessed Housing Kit, showing both round and square components.

This image displays the two components of the Domus Line recessed housing kit: one round housing and one square housing, both in a stainless steel effect finish.

Ezaugarriak

Paketearen edukia

The Domus Line Recessed Housing Kit includes the following components:

Zehaztapenak

MarkaDomus Line
FabrikatzaileaDOMUS LERROA
Modelo zenbakia2011619
ASINB0C4V26LTJ
Produktuaren neurriak (L x W x H)4.5 x 3.2 x 1.8 cm (45L x 32W x 18H millimeters)
Elementuaren pisua2 kilogramo
KoloreaAltzairu herdoilgaitzezko efektua
MaterialaPlastikoa, altzairu herdoilgaitza
EstiloaEzarri
Elementu kopurua1 (kit containing two housings)
Kontrol-metodoaRemote Control (for the device it houses)
Energia iturriaElectric Cable (for the device it houses)
Jatorrizko HerrialdeaAlemania

Konfigurazioa eta Instalazioa

This section provides instructions for properly installing the Domus Line Recessed Housing.

  1. Aukeratu kokapena: Select a suitable flat surface for installation, ensuring there is sufficient depth behind the surface for the housing (minimum 14 mm recess depth).
  2. Prestatu Irekiera: Using appropriate tools, create a circular opening with a diameter of 40 mm (1.57 inches) in the chosen surface. Ensure the cut is clean and precise for a snug fit.
  3. Txertatu etxebizitza: Gently push the desired recessed housing (round or square) into the prepared opening until its outer flange sits flush with the surface. The housing is designed to be held in place by friction.
  4. Insert Remote Control: Once the housing is securely in place, insert your 'Call Me' remote control into the housing. Ensure it fits snugly and is oriented correctly.
Technical drawing of the square recessed housing with dimensions.

This technical drawing illustrates the dimensions of the square recessed housing. Key measurements include a 46mm side length for the outer frame and a 40mm mounting diameter for the circular opening.

Technical drawing of the round recessed housing with dimensions.

This technical drawing illustrates the dimensions of the round recessed housing. Key measurements include a 46mm outer diameter and a 40mm mounting diameter for the inner opening.

Funtzionamendu-argibideak

The Domus Line Recessed Housing is a passive component designed to hold a 'Call Me' remote control. It does not require any active operation itself. Once the remote control is placed within the housing, operate the remote control as per its own manufacturer's instructions.

Mantentzea

To ensure the longevity and appearance of your recessed housing:

Arazoak konpontzea

This section addresses common issues you might encounter during installation or use.

Bermea eta Laguntza

For information regarding warranty coverage, technical support, or replacement parts, please contact Domus Line customer service directly. Refer to the product packaging or the official Domus Line webharremanetarako datuak lortzeko gunea.

You may also refer to the product listing on Amazon.com.be for additional support information or to contact the seller.

Online Resource: Product Page on Amazon.com.be

Erlazionatutako dokumentuak - 2011619

Aurreview Domus Line CALL-ME V17 TW RF Remote Control and Receiver Installation Guide
Comprehensive installation guide for the Domus Line CALL-ME V17 TW RF remote control and the associated RECEIVER CONTROLLER TW, covering setup, programming, operation, battery replacement, and safety precautions.
Aurreview Domus Line CALL ME / CALL ME XD (XDM) Wireless Lighting Control System Instructions
Installation and pairing guide for the Domus Line CALL ME and CALL ME XD (XDM) wireless lighting control systems, including receiver modules and remote controls. Provides details on power requirements, connection, pairing procedures, and dimmer functionality.
Aurreview Domus Line X-Driver instalazio eskuliburua eta zehaztapenak
Domus Line X-Driver-aren gida osoa, instalazio-argibideak, zehaztapen teknikoak eta aukerako osagarriak barne. Ezaugarriak, funtzionamendua eta betetzeari buruzko informazioa biltzen ditu.
Aurreview Domus Line MIDI BK foku enpotratuaren instalazio eta mantentze gida
Domus Line MIDI BK foku hondoratuaren instalazio eta bonbilla ordezkatzeko gida osoa, segurtasun argibideak, zehaztapen teknikoak eta diagramak barne. 10W eta 20W-ko G4 12V-ko halogenozko l-etarako egokia.amps.
Aurreview DOMUS LINE O-LINE LED Lighting System Installation Guide
Comprehensive installation guide for the DOMUS LINE O-LINE and O-LINE (D-M) LED lighting systems, detailing mounting procedures, electrical connections, and safety information.
Aurreview Domus Line RC3 Multi-Channel Remote Control User Guide
Comprehensive guide to using the Domus Line RC3 multi-channel remote control for LED lighting, including setup, pairing with X-DRIVER, CM2-XD, Call Me Receiver, and Magic Tune Receiver, and battery replacement.