1. Sarrera
Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.
Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.
2. Segurtasun informazioa
Bete beti segurtasun neurri hauek gailuari edo ibilgailuari lesioak edo kalteak saihesteko:
- Ez saiatu bateria izoztuta bat martxan jartzen.
- Ziurtatu konexioaren polaritate egokia (giltza gorria)amp positiboari, beltza clamp to negative). Reverse polarity can cause damage.
- Do not allow the smart clamps to touch each other when connected to the jump starter.
- Mantendu gailua haurrengandik urrun.
- Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
- Ez desmuntatu edo aldatu gailua.
- Erabili emandako giltza adimenduna bakarrik.amps and charging cables.
- If the device becomes excessively hot during use, disconnect it immediately.
Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.
3. Paketearen edukia
Egiaztatu elementu guztiak paketean daudela:
- FLYLINKTECH BD10 Jump Starter Unit
- Bateria adimenduna Clamps
- USB-C USB-C kablea
- USB-A USB-C kablea
- 12V DC Car Charger Adapter
- Erabiltzailearen eskuliburua
- Biltegiratze-zorroa
Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.
4. Konfigurazioa eta kargatzea
4.1 Hasierako karga
Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.
- Connect the provided USB-C cable to the jump starter's USB-C input port.
- Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
- The LED screen will display the charging status and battery percentage.
4.2 Kargatzeko denborak
| Kargagailuaren balorazioa | Gutxi gorabeherako kargatze-denbora |
|---|---|
| 5W | 18 ordu |
| 18W | 7 ordu |
| 45W | 2 ordu |
Note: A 45W wall charger is not included in the package.
Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.
5. Funtzionamendu-argibideak
5.1 Ibilgailu bat abiaraztea
The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.
- Ensure Sufficient Charge: Check the jump starter's LED screen to ensure it has at least 50% charge.
- Connect Smart Clamps: Insert the blue plug of the smart clamps into the jump starter's 12V output port. Ensure a firm connection.
- Autoaren bateriara konektatu:
- Erantsi gorria (+) clamp to the vehicle's positive battery terminal.
- Erantsi beltza (-) clamp ibilgailuaren bateriaren terminal negatiboan.
- Egiaztatzeko adierazlea: Smart clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
- Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
- Abiarazi ibilgailua: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
- Kendu Clamps: Once the vehicle starts, immediately remove the smart clamps from the car battery, then disconnect them from the jump starter.
Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.
Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.
5.2 Energia Bankuaren Funtzioa
The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.
- USB1 irteera: Up to 18W (max)
- USB2 irteera: Up to 18W (max)
- USB-C irteera: 45W arte (PD)
Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.
Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.
5.3 LED linterna
The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.
- Press and hold the flashlight button to turn on the constant light.
- Press the button again to cycle through SOS and strobe modes.
- Luze sakatu berriro itzaltzeko.
Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.
5.4 Informative LED Screen
The 6.0-inch LED screen provides real-time information about the device's status:
- Bateria maila: Gainerako bateriaren ehunekoa bistaratzen dutage.
- IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
- Wattage Pantaila: Indicates the power (W) being drawn or supplied.
- Erroreen abisuak: Displays specific error codes or symbols if an issue occurs.
Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.
6. Mantentzea
- Kargatu aldizka: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
- Biltegiratzea: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
- Garbiketa: Garbitu gailua zapi leun eta lehor batekin. Ez erabili produktu kimiko gogorrik edo material urratzailerik.
- Clamp Zaintza: Ziurtatu klipa adimendunaamps are clean and free of corrosion before and after each use.
7. Arazoak
The device features multiple alarm situations indicated by audible signals and screen displays:
- Vol. Baxuatage Babesa: Audible signal "3". Recharge the device.
- Kanpoko liburukiatage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
- Zirkuitu laburren babesa: Audible signal "5". Check clamp connections for short circuits.
- Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
- Gainkorrontearen babesa: Audible signal "7". Reduce load or check connections.
- Tenperatura altuko/baxuko alarma: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
- Reverse Connection: Audible signal "9". Correct the clamp polaritatea.
7.1. irudia: Amaituview of the device's multi-alarm system, indicating various protection states with unique audible signals.
Urrats hauek jarraitu ondoren arazoak konpontzen ez badira, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | FLYLINKTECH |
| Eredua | BD10 |
| Irteerako korronte gailurra | 6000 Ampere |
| Bateria Edukiera | 26800mAh |
| Irteera boltage | 12V |
| USB-C sarrera/irteera | PD 45 W |
| USB-A irteera | 18 W (gehienez) |
| Applicable Engine Types | All Gas, up to 12.0L Diesel |
| Funtzionamendu-tenperatura | -20 °C eta 60 °C (-4 °F eta 140 °F) |
| Produktuaren neurriak | 23.95 x 10 x 5.69 cm |
| Elementuaren pisua | 920 g |
Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).
9. Bermea eta Laguntza
FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webgunea. Gorde erosketaren egiaztagiria bermearen ondorioetarako.
