Behringer Edge Semi-modular Analog Percussion Synthesizer

1. Sarrera

The Behringer Edge is a powerful semi-modular analog percussion synthesizer designed to deliver a wide range of percussive and rhythmic sounds. It combines classic analog synthesis with modern sequencing capabilities, offering extensive sound design possibilities through its dual VCO architecture, multimode filter, and comprehensive patch matrix.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Behringer Edge. Please read it thoroughly to ensure proper use and to maximize your experience with this instrument.

Ezaugarri nagusiak:

• Analog Semi-modular Percussion Synthesizer with 15 x 10 I/O Patch Matrix
• Dual VCO architecture with PWM and triangle waves
• White/Pink Noise generation
• Multimode 24dB ladder filter
• 2 x 8-step Sequencer with velocity controls
• MIDI Channel Voice Priority Selection
• Three decay envelopes for precise control

2. Segurtasun-argibide garrantzitsuak

To reduce the risk of electric shock, fire, and/or injury, always follow the basic safety precautions listed below:

• Energia iturria: Connect the unit only to the specified power adapter. Ensure the voltage unitatearen eskakizunekin bat dator.
• Aireztapena: Ez blokeatu aireztapen-zulorik. Instalatu fabrikatzailearen argibideen arabera.
• Ura eta hezetasuna: Ez erabili aparatu hau uraren ondoan, ezta tantaka edo zipriztinen eraginpean jarri ere. Ez jarri likidoz betetako objekturik aparatuaren gainean.
• Beroa: Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
• Garbiketa: Garbitu zapi lehor batekin bakarrik.
• Zerbitzua: Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.

3. Konfigurazioa

3.1 Paketatzea

Carefully unpack your Behringer Edge and check for any signs of damage. Retain the packaging materials for future transport or storage.

3.2 Energia-konexioa

Connect the included power adapter to the DC input on the rear panel of the Edge, then plug the adapter into a suitable power outlet.

3.3 Audio-konexioak

The Edge features a 1/4" TS audio output. Connect this output to your mixer, audio interface, or ampTresna-kable estandarra erabiliz lider.

3.4 MIDI konexioak

Use standard 5-pin DIN MIDI cables to connect the Edge to other MIDI devices. The MIDI IN port receives MIDI data, while the MIDI OUT/THRU port can send MIDI data or pass through incoming MIDI data.

3.5 USB konexioa

Connect the USB Type B port on the Edge to your computer using a USB cable for MIDI over USB functionality and firmware updates.

3.6 Hasierako piztea

Once all connections are made, power on the Behringer Edge. The unit will perform a brief startup sequence.

4. Funtzionamendua

The Behringer Edge features a clearly laid out control panel. Below is an overview of the main sections and their functions.

Figure 4.1: Front Panel Layout of the Behringer Edge.

This image displays the entire front panel of the Behringer Edge synthesizer. It is organized into several distinct sections: MIDI and Patch Matrix at the top, Oscillator sections (VCO 1 and VCO 2) on the left, EG (VCO 1 & 2), Noise, Filter (VCF), and Output (VCA) sections on the right, and the Sequencer section at the bottom. Each section contains various knobs, switches, and patch points for sound shaping and control.

4.1 Top Panel: MIDI and Patch Matrix

The top section provides MIDI connectivity and a comprehensive 15x10 patch matrix for routing control voltages and audio signals.

• MIDI IN: 5-pin DIN input for receiving MIDI data.
• MIDI OUT/THRU: 5-pin DIN output for sending MIDI data or passing through incoming MIDI data.
• Patch Points (Top Row - Inputs): OSC1CV, OSC2CV, OSC DECAY, ADV/CLOCK, TRIGGER, VELOCITY, NOISE LEVEL, OSC1, OSC2, OSCEG, TRIGGER, VELOCITY, PHONES IN, PHONES OUT. These are control voltage (CV) inputs for modulating various parameters.
• Patch Points (Bottom Row - Outputs): 1-2 FM AMT, EXT AUDIO, TEMPO, PLAY/STOP, VCF MOD, VCF DECAY, VCA CV, VCA DECAY, PITCH, VCF EG, VCA, VCA EG. These are CV outputs or audio outputs for routing signals to other modules or inputs.

4.2 Oscillator Sections (VCO 1 & VCO 2)

The Edge features two Voltage Controlled Oscillators (VCOs) that generate the primary sound sources.

• MAIZTASUNA: Osziladorearen tonua doitzen du.
• FORMA: Selects the waveform (e.g., triangle, pulse).
• GUZTAILA: Controls the amount of envelope modulation applied to the oscillator's pitch.
• SEQ PITCH MOD (OSC 1): Modulates the pitch of OSC 1 based on the sequencer.
• HARD SYNC (OSC 2): Synchronizes OSC 2 to OSC 1, creating complex timbres.

4.3 EG (VCO 1 & 2)

This section controls the Envelope Generator for the VCOs.

• HAMARKADA: Sets the decay time of the envelope.
• MAILA: Adjusts the overall level of the envelope.
• 1-2 FM AMT: Controls the amount of frequency modulation from VCO 1 to VCO 2.

4.4 Zarata

Generates noise for percussive sounds or texture.

• KOLOREA: Selects between Pink and White noise.
• NOISE/EXT: Adjusts the level of the internal noise generator or an external audio input.

4.5 Filter (VCF)

Voltage Controlled Filter shapes the timbre of the sound.

• VCF (HP/LP): Selects between High-Pass and Low-Pass filter modes.
• MOZTU: Sets the filter's cutoff frequency.
• ERRESONAntzia: Boosts frequencies around the cutoff point.
• HAMARKADA: Controls the decay time of the filter envelope.
• GUZTAILA: Adjusts the amount of envelope modulation applied to the filter cutoff.
• NOISE/VCF MOD: Controls the amount of noise or VCF modulation.

4.6 Output (VCA)

Voltage Kontrolatua Amplifier controls the overall volume and dynamics.

• VCA MODE (FAST/SLOW): Selects between fast and slow VCA response times.
• HAMARKADA: Sets the decay time of the VCA envelope.
• bolumena: Irteera nagusiaren bolumena doitzen du.

4.7 Sequencer

The built-in 8-step sequencer allows for rhythmic pattern creation.

• TEMPOA: Adjusts the playback speed of the sequencer.
• CLOCK (MIDI/USB/INT/EXT): Selects the clock source for the sequencer.
• ESKALA: Sets the quantization scale for pitch steps.
• ZORROA: Adjusts the pitch for each sequencer step.
• PLAY/STOP/ADVANCE: Transport controls for the sequencer.
• VEL (Velocity): Adjusts the velocity for each sequencer step.

5. Mantentzea

5.1 Garbiketa

To clean the Behringer Edge, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish and controls.

5.2 Biltegiratzea

When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for safe storage and transport.

5.3 Firmware eguneraketak

Aldian-aldian egiaztatu Behringer-a website for available firmware updates. Firmware updates can provide new features, improvements, and bug fixes. Follow the instructions provided with the firmware update package carefully.

6. Arazoak

If you encounter issues with your Behringer Edge, refer to the following common problems and solutions:

7. Zehaztapenak

8. Bermea eta Laguntza

8.1 Bermearen informazioa

Behringer products are covered by a limited warranty. For detailed information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer webgunea.

8.2 Laguntza Teknikoa

If you require technical assistance or have questions not covered in this manual, please contact Behringer customer support. Support contact information can typically be found on the official Behringer webgunean edo produktuaren ontzian.

Before contacting support, please have your product model number (0718-ABM) and serial number ready, along with a clear description of the issue.