IRRADIO Simplified Universal Remote Control with Learning Function

1. Sarrera

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. Produktua amaitu daview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

2.1. irudia: Aurrealdea view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

Botoiaren funtzioak:

• Pizteko botoia (gorria): Gailua pizten edo itzaltzen du.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+ / V-: Bolumena handitu edo txikitu egiten du.
• P+ / P-: Kanalak gora edo behera aldatzen ditu.
• A / B Buttons: Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. Konfigurazioa: Bateriaren instalazioa

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. Kokatu bateriaren konpartimendua urrutiko agintearen atzealdean.
2. Ireki bateriaren konpartimenduaren estalkia.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Itxi bateriaren konpartimenduaren estalkia ondo.

Oharra: The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

Programazioaren urratsak:

1. Prestaketa: Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. Sartu Ikasteko moduan: Eduki sakatuta Boterea botoia eta AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. Select Button to Program: Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. Seinale transmisioa: Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Program More Buttons: Repeat steps 3 and 4 for each button you wish to program.
6. Exit Learning Mode: Once all desired buttons are programmed, press the Boterea button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

Ohar garrantzitsuak:

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. Mantentzea

Bateria ordezkatzea:

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

Garbiketa:

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.

6. Arazoak

• Urrunekoek ez dute erantzuten:
  • Egiaztatu bateriak polaritate zuzenarekin behar bezala sartuta dauden.
  • Replace old batteries with new AAA/LR03 batteries.
  • Ziurtatu ez dagoela oztoporik urruneko gailuaren eta gailuaren artean.
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.