AEG Jumpstarter JS15 Instruction Manual

Sarrera

The AEG Jumpstarter JS15 is a versatile portable power station designed to provide emergency jump-starting for vehicles, act as a power bank for mobile devices, and offer illumination with its integrated LED lamp. This manual provides essential information for the safe and effective use of your device.

It is capable of delivering 400 A starting current and a peak current of 1500 A for 3 seconds, suitable for gasoline engines up to 4.0 L and diesel engines up to 2.0 L. The internal Li-ion battery has a capacity of 44.4 Wh (3 x 4000 mAh) and supports up to 1,000 charge cycles.

Segurtasun-argibideak

Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Do not expose the jump starter to rain or wet conditions. Water entering the device will increase the risk of electric shock.
• Do not use the jump starter if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Ez zirkuitulaburra egin bateriaren klipaz.amps. Ensure positive (+) and negative (-) clamps do not touch each other or the same metal object.
• Always connect the red (+) clamp to the positive (+) terminal of the vehicle battery and the black (-) clamp to a metal part of the vehicle chassis away from the battery.
• Wear eye protection and protective clothing when working with vehicle batteries.
• Mantendu haurren eskura.
• Ez saiatu salto izoztutako bateria bat abiarazten.
• Ensure the vehicle is in park (P) or neutral (N) and the parking brake is engaged before attempting to jump start.
• Deskonektatu abiarazlea ibilgailuaren bateriatik ibilgailua martxan jarri eta 30 segundoren buruan.

Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• AEG Jumpstarter JS15 unit
• Jump starter cables with clamps
• USB kargatzeko kablea
• Biltegiratzeko poltsa
• Erabiltzailearen eskuliburua (dokumentu hau)

Image: The AEG Jumpstarter JS15 alongside its included storage bag, emphasizing portability and protection.

Produktua amaituview

Familiarize yourself with the components of the AEG Jumpstarter JS15.

Image: AEG Jumpstarter JS15 front view, highlighting 12V vehicle voltage, 400A starting current, and 1500A peak power (3s.

Irudia: Gertuko planoa view of the AEG Jumpstarter JS15, showing its compact form factor and integrated LED light.

Image: Detail of the AEG Jumpstarter JS15's battery connection ports, protected by a cover.

Jump Starter kargatzen

Before first use, fully charge the AEG Jumpstarter JS15. It takes approximately 6 to 9 hours to fully charge from empty when charging via USB with 2A.

1. Connect the provided USB charging cable to the jump starter's input port.
2. Connect the other end of the USB cable to a suitable USB power source (e.g., car charger, wall adapter, computer USB port).
3. The display will indicate the charging status. Ensure the device is fully charged before storing or using for jump-starting.

Image: AEG Jumpstarter JS15 being charged via USB, car, or wall socket, also featuring a 70 lumen LED light and including a storage bag.

Setup: Connecting to Vehicle for Jump Start

Follow these steps to safely connect the jump starter to a vehicle battery:

1. Ziurtatu abiarazlea guztiz kargatuta dagoela.
2. Itzali ibilgailuaren piztea eta osagarri guztiak (argiak, irratia, etab.).
3. Konektatu gorria (+) clamp du positiboa (+) terminal of the vehicle's battery.
4. Konektatu beltza (-) clamp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative terminal of the battery unless specified by the vehicle manufacturer.
5. Ziurtatu bai clamps have a secure connection.

Image: AEG Jumpstarter JS15 showing direct battery connection clamps, suitable for gasoline engines up to 4.0L and diesel engines up to 2.0L.

Operating: Jump Starting a Vehicle

Once the jump starter is correctly connected to the vehicle battery:

1. Turn on the AEG Jumpstarter JS15. The display will show the battery status.
2. Attempt to start the vehicle's engine. If the vehicle does not start immediately, wait at least 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
3. Ibilgailua martxan jartzen denean, deskonektatu berehala beltza (-) clamp from the vehicle chassis, then disconnect the gorria (+) clamp ibilgailuaren bateriatik.
4. Allow the vehicle's engine to run for a few minutes to recharge its battery.

The AEG Jumpstarter JS15 is compatible with 12V vehicle systems.

Image: AEG Jumpstarter JS15 used in various vehicle types including cars, vans, motorcycles, quads, boats, and scooters.

Using as a Power Bank (USB & Wireless Charging)

The AEG Jumpstarter JS15 can also charge your mobile devices.

USB kargatzea:

1. Connect your device's USB charging cable to the USB output port on the jump starter.
2. Abiarazleak automatikoki hasiko da zure gailua kargatzen.

Haririk gabeko karga:

1. Place your Qi-compatible smartphone or other device on the wireless charging pad located on the top surface of the jump starter.
2. Ensure the device is centered on the pad for optimal charging. The jump starter provides up to 10W wireless charging.

Image: AEG Jumpstarter JS15 functioning as a power bank, charging a smartphone and camera, highlighting 44.4 Wh battery capacity, USB and wireless charging up to 10W, and Li-ion battery with up to 1,000 charge cycles.

LED L erabilizamp

LED integratua lamp provides 70 lumens of illumination for various situations.

• LED l piztekoamp, press the dedicated light button (refer to product overview kokapenagatik).
• Press the button again to cycle through different light modes (e.g., steady on, strobe, SOS, if available) or to turn it off.

Image: The bright 70 lumen LED lamp of the AEG Jumpstarter JS15 illuminated.

Mantentzea

Mantentze egokiak zure abiarazlearen iraupena eta errendimendua bermatzen ditu.

• Kargatzen: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health. Store it with at least 50% charge.
• Garbiketa: Garbitu unitatea zapi lehor eta leun batekin. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Biltegiratzea: Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Bateriaren iraupena: The high-quality lithium-ion battery is designed for up to 1,000 charge cycles.

Arazoak konpontzea

Zehaztapenak

Image: AEG Jumpstarter JS15 dimensions (190 x 85 x 28.5 mm) and weight (523g), demonstrating its compact and portable design.

Bermea eta Laguntza

Bermeari buruzko informazioa eta bezeroarentzako laguntza lortzeko, jo AEGren webgune ofizialera. webwebgunearekin edo jarri harremanetan zure saltzailearekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

Fabrikatzailea: AEG

Modelo zenbakia: 10736

ASIN: B0CC9N2FQQ