Dirt Devil Multi-Surface Rewind+ Upright Bagless Vacuum Cleaner

1. Muntaketa eta hasierako konfigurazioa

Before operating your Dirt Devil Multi-Surface Rewind+ vacuum cleaner, ensure all components are correctly assembled. Refer to the 'What's in the Box' diagram to identify all parts.

1. irudia: barne dauden osagaiak

1. Heldulekuaren muntaia: Insert the upper handle into the main vacuum body until it clicks securely into place.
2. Hodi-konexioa: Connect the flexible hose to the designated port on the vacuum body. Ensure a tight fit to maintain suction.
3. Tresnen biltegiratzea: Attach the included cleaning tools (Pet Upholstery tool, Turbo tool, 2-in-1 Dusting Brush and Crevice tool) to the onboard storage clips for easy access.

Figure 2: Assembled Vacuum with Tools

2. Funtzionamendu-argibideak

2.1 Piztu/Itzaltzea

Plug the power cord into a suitable electrical outlet. To turn the vacuum on, step on the power pedal located near the base. Step on it again to turn the vacuum off.

2.2 Azalerak garbitzea

The Multi-Surface Rewind+ is designed for effective cleaning on both carpets and hard floors. The PowerPass Technology helps prevent dust and dirt from scattering on hard surfaces.

Figure 3: Multi-Surface Cleaning

Figure 4: Debris Containment

2.3 Eranskinak erabiltzea

The removable wand and Click Lock tool kit allow for versatile cleaning. Detach the wand and attach the desired tool for above-floor cleaning, upholstery, or tight spaces.

• Maskota Tapizatzeko Tresna: Ideal for removing pet hair from furniture and stairs.
• Turbo tresna: Provides concentrated suction for stubborn dirt and debris.
• 2-in-1 Dusting Brush and Crevice Tool: Use the brush for dusting delicate surfaces and the crevice tool for narrow gaps.

Figure 5: Above-Floor Cleaning

Figure 6: Pet Hair Cleaning

2.4 Cord Management

The vacuum features a one-touch cord rewind system. To retract the power cord, gently press the cord rewind pedal located on the side of the vacuum.

Figure 7: One-Touch Cord Rewind

3. Mantentzea

3.1 Zikinkeria-ontzia hustea

For optimal performance, empty the dirt cup regularly, especially when debris reaches the 'Max Fill' line. The large, easy-release dirt cup features a one-touch button for convenient emptying.

1. Ziurtatu xurgagailua deskonektatuta dagoela.
2. Sakatu zikinkeria-ontzia askatzeko botoia zikinkeria-ontzia xurgagailutik askatzeko.
3. Jarri zikinkeria-ontzia zaborrontzi baten gainean.
4. Press the one-touch button on the bottom of the dirt cup to open the lid and release debris.
5. Close the lid and reattach the dirt cup to the vacuum until it clicks into place.

Figure 8: Emptying the Dirt Cup

3.2 Iragazkien mantentze-lanak

The vacuum features extended life filtration with a washable filter. Regularly check and clean the filter to maintain suction power and reduce dust particles released into the air.

1. Desentxufatu xurgagailua eta kendu zikinkeria katilua.
2. Locate and remove the filter assembly from the dirt cup.
3. Tap the filter over a trash can to remove loose dirt.
4. Rinse the filter under running water until the water runs clear. Do not use detergent.
5. Allow the filter to air dry completely for at least 24 hours before reinserting it into the vacuum. Do not operate the vacuum with a wet filter.

3.3 Eskuila-erroiluaren garbiketa

Periodically inspect the brush roll for tangled hair or debris. Unplug the vacuum before attempting to clean the brush roll. Use scissors to carefully cut away any tangled hair or threads.

4. Arazoak

Zure xurgagailuarekin arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

If the problem persists after attempting these solutions, please contact Dirt Devil customer support.

5. Produktuaren zehaztapenak

6. Bermea eta Laguntza

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Dirt Devil website. For additional support, parts, or service, you may also visit the Dirt Devil Store on Amazon.