AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Segurtasun informazioa

Irakurri produktu honekin emandako segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Behean zerrendatzen diren argibide guztiak ez betetzeak deskarga elektrikoa, sutea edo/edo lesio larriak eragin ditzake.

• Erabili beti begien babesa bateriekin lan egitean.
• Ez erabili abiarazlea hondatuta badago.
• Mantendu abiarazlea haurren eskura ez dagoen lekuan.
• Ez busti produktua eurira edo hezeetara.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Gorde gailua leku fresko eta lehor batean, eguzki-argitik urrun.

2. Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Jumper kable adimenduna
• 1 x USB-A USB-C kablea
• 1 x garraiatzeko poltsa
• 1 x Ponpa-hodia
• 3 x Aire-tobera
• 1 x Erabiltzailearen eskuliburua

3. Produktua amaitu daview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Ezaugarri nagusiak hauek dira:

• 3000A Peak Current: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI aire konpresorea: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Power Bankaren funtzionaltasuna: USB-A output and USB-C input for charging electronic devices.

4. Konfigurazioa

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Funtzionamendu-argibideak

5.1. Ibilgailu bat martxan jartzea

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Lotu cl gorriaamp ibilgailuaren bateriaren terminal positiboari (+) eta kli beltzariamp (-) terminal negatibora.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Aire konpresorea erabiltzea

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Use the '+' and '-' buttons to set the target pressure.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Power Bank-aren funtzionalitatea

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Gailua automatikoki kargatzen hasiko da.

5.4. LED linterna

The 400-lumen LED light offers multiple modes for different situations.

• Sakatu lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Eutsi lamp switch button to turn off the light.

6. Mantentzea

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Garbitu gailua zapi lehor eta leun batekin. Ez erabili produktu kimiko gogorrik edo material urratzailerik.
• Leku fresko eta lehor batean gorde. Saihestu muturreko tenperaturak.

7. Arazoak

• Gailua ez da pizten: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Ibilgailua ez da martxan jartzen: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Aire konpresorea ez da puzten: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Zehaztapenak

9. Produktu Ofizialen Bideoak

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.