ROCKBROS Adjustable Bike Floor Stand Instruction Manual

1. Sarrera

This manual provides instructions for the assembly, operation, and maintenance of your ROCKBROS Adjustable Bike Floor Stand. This stand is designed to securely hold bicycles with tire widths between 2.6 cm and 8 cm (1.02 inches - 3.15 inches), offering a stable solution for indoor bike storage.

Figure 1: ROCKBROS Adjustable Bike Floor Stand with a road bike, illustrating its design and key features like weight capacity and adjustable width.

2. Segurtasun informazioa

• Ensure the stand is placed on a flat, stable surface before use.
• Verify that the bike's tire width is within the adjustable range of 2.6-8 cm (1.02-3.15 inches).
• Ez gainditu 13 kg-ko (28.6 lb) gehienezko pisu-ahalmena.
• Always ensure the bike is securely seated in the stand before releasing it.
• Mantendu eskuak eta hatzak mugitzen diren piezetatik urrun muntaketa eta doikuntza bitartean.
• This stand is for storage and light maintenance; avoid heavy repairs that could destabilize the bike.

3. Paketearen edukia

Mesedez, egiaztatu paketea osagai guztiak daudela ziurtatzeko:

• 1x Parking Rack (main stand components)
• 1x Hex Wrench (for assembly/adjustment)

Figure 2: Included components: the bike parking rack and a hex wrench.

4. Konfigurazioa eta Muntaketa

The ROCKBROS Bike Floor Stand features a rapid assembly and dismantling structure for convenience.

1. Osagaiak identifikatzea: Separate the main curved support pieces from the base pieces.
2. Snap-in Installation: Align the designated slots on the curved support pieces with the corresponding tabs on the base pieces. Gently push until they snap securely into place. Look for matching numbers (e.g., L1 to L1, R1 to R1) to ensure correct orientation.
3. Konexio segurua: Ensure all connections are firm and there is no wobbling.

Figure 3: Snap-in installation process, aligning components using matching numbers for easy assembly.

Figure 4: The stand's components separated, demonstrating its portable design for easy assembly and dismantling.

5. Funtzionamendu-argibideak

To use the bike stand:

1. Zabalera egokitu: Before placing your bike, ensure the stand's width is adjusted to comfortably fit your tire (refer to Section 6 for adjustment details).
2. Position Bike: Roll your bike's wheel into the stand. For optimal stability, insert the wheel with the taller end of the holder facing towards the pedals.
3. Kokapen segurua: The stand's 3D force relief structure and anti-slip silicones are designed to evenly disperse force and provide stability. Ensure the tire is fully seated within the stand's cradle.

Figure 5: A bicycle secured in the stand, demonstrating the anti-slip silicones that enhance stability.

Figure 6: Visual representation of the 3D force relief structure, designed to distribute the bike's weight evenly for maximum stability.

6. Egokitzapena

The stand's width is adjustable to accommodate various tire sizes from 2.6 cm to 8 cm (1.02 inches to 3.15 inches).

1. Measure Tire Width: Before adjustment, measure your bike's tire width to determine the required setting.
2. Aurkitu doikuntza-botoia: Find the adjustment knob located on the base of the stand.
3. Zabalera egokitu: Loosen the knob, slide the adjustable part to the desired width, and then tighten the knob to secure the setting. The stand has markings (e.g., 30, 40, 80mm) to guide your adjustment.

Figure 7: The adjustable mechanism, allowing the stand to fit tire widths between 30mm and 80mm.

Figure 8: Guide on measuring your bike's tire width and checking tire specifications for compatibility with the stand.

7. Mantentzea

Regular maintenance ensures the longevity and proper function of your bike stand.

• Garbiketa: Garbitu standa iragarkiarekinamp hautsa eta zikinkeria kentzeko zapia. Saihestu produktu kimiko gogorrak.
• Ikuskapena: Periodically check all connections and adjustment points to ensure they are secure. Tighten any loose screws or knobs.
• Biltegiratzea: When not in use, especially for extended periods, the stand can be disassembled for compact storage (refer to Section 4).

8. Arazoak

• Bike is unstable:
  • Ensure the stand's width is correctly adjusted to your tire size. A loose fit can cause instability.
  • Verify the bike's weight does not exceed 13 kg (28.6 lbs).
  • Check that the stand is on a flat, level surface.
  • Ensure the wheel is fully inserted and properly oriented within the stand. The taller end of the holder should face towards the pedals for maximum stability.
• Muntatzeko zailtasuna:
  • Refer to Section 4 and ensure matching numbers on components are aligned for snap-in installation.
  • Apply gentle, even pressure during assembly.
• Stand slides on floor:
  • Ensure the anti-slip silicones on the base are clean and intact.
  • Place the stand on a surface that provides good grip.

9. Zehaztapenak

10. Bermea eta Laguntza

ROCKBROS offers a lifetime warranty for all quality problems associated with this product. For warranty claims, technical support, or any inquiries, please contact ROCKBROS customer service through the retailer where the product was purchased or visit the official ROCKBROS webgunea.