LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower User Manual

1. Segurtasun informazioa

Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.

• Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
• Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
• Ez erabili sega-makina belar bustian edo euripean.
• Clear the area of objects such as rocks, toys, and wires before mowing.
• Never allow children or untrained individuals to operate the lawn mower.
• Bete erregaia ondo aireztatutako leku batean, motorra itzalita eta hoztuta. Ez erre erregaia hartzen ari zaren bitartean.
• Always disconnect the spark plug wire before performing any maintenance or cleaning.

2. Konfigurazioa eta Muntaketa

Follow these steps to prepare your lawn mower for first use.

2.1 Paketatzea

Kontu handiz atera osagai guztiak paketetik. Ziurtatu pieza guztiak daudela pakete-zerrendan adierazitakoaren arabera.

2.2 Heldulekua

1. Unfold the handle and secure it in the operating position using the provided knobs or levers.
2. Ziurtatu kable guztiak behar bezala bideratuta daudela eta ez daudela estututa.

2.3 Motor-olioa gehitzea

The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.

• Jarri segadora gainazal maila batean.
• Aurkitu olio-betetzeko tapoia/maila-varilla.
• Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.

2.4 Erregaia gehitzea

Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

• Ziurtatu motorra itzalita eta hoztuta dagoela.
• Ireki erregai deposituaren tapa.
• Fill the fuel tank, leaving a small space for expansion.
• Itxi ondo erregai-deposituaren tapoia.

2.5 Belarra biltzeko poltsaren eranskina

Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.

3. Funtzionamendu-argibideak

Motorra martxan jarri aurretik, ohitu zaitez kontrolak eta funtzionamendu-prozedurak ezagutzen.

3.1 Motorra martxan jartzea

1. Ensure the fuel tank is filled and engine oil is at the correct level.
2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
3. Move the throttle lever to the 'START' or 'CHOKE' position.
4. Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
5. Once the engine starts, gradually move the throttle lever to the 'RUN' position.

3.2 Ebaketa-altuera doitzea

The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.

• Ensure the engine is off and the blade has stopped rotating.
• Locate the height adjustment levers, typically near the wheels.
• Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.

3.3 Autopropultsioa engaiatzea

This model features self-propulsion for easier operation.

• With the engine running, engage the self-propel lever (usually located on the handle).
• The mower will begin to move forward. Release the lever to disengage self-propulsion.

3.4 Emptying the Grass Bag

Regularly check and empty the grass collection bag to maintain optimal cutting performance.

• Stop the engine and wait for the blade to stop completely.
• Lift the rear discharge flap and carefully remove the grass bag.
• Empty the grass clippings into a suitable container.
• Reattach the grass bag securely.

3.5 Motorra gelditzea

To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.

4. Mantentzea

Mantentze-lan erregularrak zure belarra mozteko makinaren iraupena eta errendimendu optimoa bermatzen ditu.

4.1 Garbiketa

• After each use, clean the underside of the mower deck to prevent grass buildup.
• This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
• Garbitu kanpoaldea iragarkiarekinamp cloth. Do not use high-pressure washers directly on the engine or electrical components.

4.2 Pala zaintzea

• Regularly inspect the blade for sharpness and damage. A dull blade tears grass, leading to an unhealthy lawn.
• If the blade is dull, have it sharpened or replaced by a qualified service technician.
• Always disconnect the spark plug wire before inspecting or working on the blade.

4.3 Motor-olioa aldatzea

Aldatu motorraren olioa lehenengo 5 funtzionamendu orduen ondoren, eta gero 25 orduro edo urtero, lehenengo gertatzen dena edozein dela ere.

• Run the engine for a few minutes to warm the oil.
• Gelditu motorra eta deskonektatu bujiaren kablea.
• Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
• Remove the drain plug (or fill cap) and allow the oil to drain completely.
• Replace the drain plug and refill with the recommended amount and type of new engine oil.

4.4 Air Filter Inspection and Cleaning

Inspect the air filter regularly and clean or replace it as needed to ensure proper engine performance.

4.5 Bujiaren ikuskapena

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.

4.6 Biltegiratzea

For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.

5. Arazoak

Atal honek zure belarra mozteko makinarekin izan ditzakezun arazo ohikoenak jorratzen ditu.

6. Zehaztapenak

Key technical details for the LEHMANN LGALM-2642 Lawn Mower.

7. Bermea eta Laguntza

LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.

7.1 Bezeroarentzako laguntza

If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN webharremanetarako datuak lortzeko gunea.

When contacting support, please have your model number (LGALM-2642) and purchase date available.