1. Sarrera
This manual provides essential information for the installation, operation, and maintenance of your A-Tech 8GB Kit (2x4GB) DDR3 1600MHz PC3-12800 SODIMM memory upgrade. This kit is designed to enhance the performance of compatible Fujitsu LIFEBOOK laptop and all-in-one systems by expanding their memory capacity.
Image: Two A-Tech 4GB DDR3 SODIMM memory modules, packaged and ready for installation.
2. Konfigurazioa eta instalazioa
Installing new memory modules is a straightforward process, but requires careful handling to prevent damage to the components or your system. Always refer to your system's specific manual for detailed instructions on accessing and replacing memory modules, as procedures may vary by model.
2.1 Segurtasun-neurriak
- Itzali: Ensure your computer is completely powered off and unplugged from the wall outlet. Remove the battery if it's a laptop.
- Elektrizitate estatikoa: Static electricity can damage electronic components. Discharge any static electricity from your body by touching a grounded metal object (e.g., an unpainted metal part of your computer chassis) before handling the memory modules. Consider using an anti-static wrist strap.
- Kontuz maneiatu: Hold the memory modules by their edges, avoiding contact with the gold connectors or the chips on the module.
2.2 Instalazio-urratsak
- Prestatu zure sistema: Power down your computer, disconnect all cables, and remove the battery (for laptops).
- Sarbide Memoriaren Zirrikituak: Open your computer's case or access panel to locate the memory slots. Consult your system's manual for the exact location.
- Kendu modulu zaharrak (hala badagokio): If replacing existing modules, gently push the clips on both sides of the SODIMM slot outwards. The module will pop up at an angle. Carefully pull it out.
- Insert New Modules: Align the notch on the A-Tech SODIMM module with the key in the memory slot. Insert the module at a 45-degree angle, applying firm, even pressure until it is fully seated.
- Secure Modules: Push the module down until the clips on both sides snap into place, securing the module horizontally. Ensure both clips are fully engaged.
- Itxi sistema: Replace the access panel or close the computer case. Reconnect all cables and the battery.
- Piztu: Turn on your computer. The system should automatically detect the new memory. You may need to check your system's BIOS/UEFI settings to confirm the recognized memory amount.
Image: Visual representation of the compatibility of A-Tech memory with various laptop and all-in-one systems.
3. Eragiketa-onurak
Once installed, your A-Tech memory upgrade will immediately begin to improve your system's performance. RAM (Random Access Memory) is crucial for multitasking and running applications smoothly. With increased RAM, your computer can handle more tasks simultaneously without slowing down.
Image: Illustrates the benefit of expanded memory for seamless multitasking.
Image: Depicts the significant performance boost achieved by upgrading with A-Tech memory.
4. Mantentzea
A-Tech memory modules are designed for long-term reliability and generally require minimal maintenance. Proper handling and storage are key to their longevity.
- Manipulazioa: Always handle memory modules by their edges to avoid touching the gold contacts or integrated circuits.
- Garbiketa: If necessary, gently clean the gold contacts with a soft, lint-free cloth or a specialized electronics cleaner. Avoid using water or harsh chemicals.
- Biltegiratzea: When not in use, store memory modules in their original anti-static packaging or in an anti-static bag to protect them from static discharge and physical damage.
5. Arazoak
If you encounter issues after installing your A-Tech memory, consider the following common troubleshooting steps:
- Sistemak ez du abiarazten / Ez dago pantailarik:
- Ensure modules are fully seated in their slots. Gently push down on both ends of the module until the clips snap into place.
- Try installing one module at a time to identify if one module is faulty or if a specific slot is problematic.
- Verify compatibility with your system's manual.
- Memoria kopuru okerra detektatu da:
- Egiaztatu zure sistemaren BIOS/UEFI ezarpenak detektatutako memoria baieztatzeko.
- Ziurtatu zure sistema eragilea 64 bitekoa dela 4 GB baino gehiagoko RAM memoria guztiz erabiltzeko.
- Verify that your system's motherboard supports the total amount of RAM and the specific memory type (DDR3 1600MHz).
- Sistemaren ezegonkortasuna / Pantaila urdinak:
- Exekutatu memoria diagnostiko tresna bat (adibidez, Windows Memory Diagnostic edo MemTest86) erroreak egiaztatzeko.
- Ensure the memory modules are running at their specified voltage (1.5V for this kit).
If issues persist after following these steps, please contact A-Tech's technical support for further assistance.
6. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | A-Tech |
| Modelo zenbakia | ASQ294 |
| RAM Tamaina | 8 GB Kit (2 x 4 GB Modules) |
| RAM teknologia | DDR3 SODIMM |
| Memoria Abiadura | 1600 MHz (PC3-12800) |
| liburukiatage | 1.5 Volt |
| Akatsen zuzenketa | ECCrik gabeko bufferrik gabekoa |
| Pin zenbaketa | 204-Pin |
| Produktuaren neurriak | 2.66 x 1.18 x 0.15 hazbete |
| Gailu bateragarriak | Fujitsu LIFEBOOK A514, A552/F, A573/G, AH50/HN, AH55/H, AH76/HN, E744, E754, NH532, SH772, UH552 |
7. Bermea eta Laguntza
7.1 Bermearen informazioa
All A-Tech memory modules are backed by A-Tech's Limited Lifetime Warranty. This warranty covers defects in materials and workmanship for the lifetime of the product. For full details regarding warranty terms and conditions, please refer to the official A-Tech webgunea.
Image: Highlights A-Tech's commitment to reliability through rigorous quality control testing.
7.2 Laguntza Teknikoa
A-Tech provides a knowledgeable Tech Team available to assist you before and after your purchase. If you have any questions, require installation guidance, or need troubleshooting assistance, please do not hesitate to contact them.
For support and additional resources, visit the A-Tech webgunea: atechmemory.com/pages/qr
