YOUNGDO Pneumatikoen Puzgailu Eramangarriaren Aire Konpresorea (0166 Modeloa) Erabiltzailearen Eskuliburua

Sarrera

This manual provides detailed instructions for the safe and efficient operation of your YOUNGDO Portable Tire Inflator Air Compressor, Model 0166. Please read this manual thoroughly before use and retain it for future reference. This device is designed for inflating various items such as car tires, motorcycle tires, bicycle tires, and sports balls.

Segurtasun Informazioa

• Always read and understand this instruction manual before operating the device.
• Mantendu gailua haurren eta maskoten eskura.
• Ez jarri gailua euripean, hezetasunean edo muturreko tenperaturetan.
• Erabili gailua ondo aireztatutako leku batean gehiegi berotzea saihesteko.
• Do not over-inflate items. Always refer to the manufacturer's recommended pressure for the item being inflated.
• Disconnect the device from the power source and the item being inflated when not in use or during maintenance.
• Ez saiatu gailua zeuk desmuntatzen edo konpontzen. Jarri harremanetan zerbitzu-langile kualifikatuekin laguntza jasotzeko.
• Ensure the inflation hose and nozzles are securely attached before starting inflation.

Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• Portable Air Compressor (Model 0166)
• Braided Inflation Tube
• 4 Nozzles (various types for different valves and inflatables)
• 1 Safety Hammer Head
• USB kargatzeko kablea
• Cigarette Lighter Charging Cable (12V DC)
• Garbigailua
• Argibide eskuliburua

Image: YOUNGDO Portable Tire Inflator with all included accessories, including various nozzles, charging cables, and inflation tube.

Produktua amaituview

Familiarize yourself with the components and controls of your tire inflator:

Image: Labeled diagram of the tire inflator highlighting the digital display, control buttons (SOS, +, Power, -, Mode/Unit), LED light, and heat dissipation holes.

• Bistaratze digitala: Shows current pressure, target pressure, battery level, and selected mode/unit.
• SOS botoia: Activates the LED light with SOS, bright, and strobe modes.
• '+' botoia: Helburuko presioa handitzen du.
• Pizteko botoia: Long press to power on/off. Short press to start/stop inflation.
• '-' botoia: Helburuko presioa murrizten du.
• Mode/Unit Button: Short press to cycle through preset inflation modes (Car, Bicycle, Motorcycle, Ball). Long press to change pressure units (Bar, Psi, Kpa, Kg/cm²).
• Inflazio-portua: Located at the top, where the inflation tube connects.
• USB-C kargatzeko ataka: Barneko bateria kargatzeko.
• USB-A irteerako ataka: For using the device as a power bank.
• 12V DC Input Port: For direct power from a car cigarette lighter.
• LED argia: Provides illumination and emergency signaling.
• Beroa xahutzeko zuloak: Located on the sides to prevent overheating during operation.

Konfigurazioa

Gailua kargatzen

The inflator features a built-in 6000mAh lithium polymer battery. Before first use, it is recommended to fully charge the device. Connect the provided USB charging cable to the USB-C charging port on the inflator and a compatible USB power adapter (not included). The battery level indicator on the digital display will show charging progress. A full charge ensures optimal performance and portability.

Image: The tire inflator highlighting its 6000mAh battery capacity and estimated number of inflations for various items.

Energia-iturri bikoitzeko aukerak

Your inflator can be powered in two ways:

• Barne bateria: For cordless operation, rely on the built-in 6000mAh battery. Ensure it is sufficiently charged.
• 12V DC Car Power: Connect the provided cigarette lighter charging cable to the 12V DC input port on the inflator and your vehicle's cigarette lighter socket. This method allows the pump to operate directly from your car's power. Oharra: This method powers the pump but does not charge the internal battery due to voltage desberdintasunak.

Image: Illustration of the two power supply options: internal 6000mAh battery for cordless use and 12V DC car cigarette lighter connection.

Funtzionamendu-argibideak

General Inflation Steps

1. Konektatu mahuka: Screw the braided inflation tube securely into the inflation port on the top of the device.
2. Aukeratu pita: Choose the appropriate nozzle for your item (e.g., Schrader valve for car/motorcycle/mountain bike, Presta valve adapter for road bike, needle for balls, other adapters for inflatables). Attach it to the end of the inflation tube.
3. Piztu: Press and hold the Power button for approximately 3 seconds to turn on the inflator. The digital display will illuminate, showing the current pressure.
4. Aurrez ezarritako presioa: Use the '+' and '-' buttons to set your desired target pressure. The device supports Bar, Psi, Kpa, and Kg/cm². Press the Mode/Unit button to cycle through preset modes (Car, Bicycle, Motorcycle, Ball). Long-press the Mode/Unit button to change pressure units.
5. Hasi inflazioa: Press the Power button again to start the inflation process. The pump will automatically stop once the preset pressure is reached.
6. Deskonektatu: Once inflation is complete, quickly disconnect the nozzle from the item to minimize air loss, then unscrew the inflation tube from the device.

Image: Step-by-step visual guide demonstrating how to install the hose, select the correct connector, set parameters, and inflate an item.

Preset Modes and Units

The inflator is designed with 4 preset inflation modes and 4 pressure units for convenience:

• Moduak: CAR, BICYCLE, MOTORCYCLE, BALL. Each mode has a default pressure range.
• Unitateak: Bar, Psi, Kpa, Kg/cm².

Press the Mode/Unit button to switch between modes. Long-press the Mode/Unit button to change pressure units. The device will remember your last selected preset air pressure.

Image: Display of preset inflation modes for various items like cars, bicycles, motorbikes, and basketballs, along with their typical pressure settings.

LED Light and Power Bank Function

The built-in LED light offers three modes:

• Distiratsua: Argiztapen orokorrerako.
• SOS: A flashing signal for emergency situations.
• Strobe: A rapid flashing light.

Press the SOS button to cycle through these lighting modes. This feature is useful for nighttime use or as an outdoor emergency light.

The inflator can also function as an emergency power bank. Connect your digital device (e.g., smartphone) to the USB-A output port using a compatible charging cable to charge it. The 6000mAh battery provides sufficient power for emergency charging.

Image: Demonstrates the inflator's dual functionality as a power bank for charging devices and an emergency lamp for illumination in dark environments.

Mantentzea

• Garbiketa: Garbitu gailua leun batekin, damp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Biltegiratzea: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures.
• Bateria zaintzea: For optimal battery life, charge the device at least once every three months if not used regularly.
• Mahuka eta toberak: Periodically inspect the inflation hose and nozzles for any signs of wear, cracks, or damage. Replace if necessary.
• Portuak: Keep all charging and inflation ports free from dust and debris.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

Bermea: This YOUNGDO product comes with a 2-year manufacturer's warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or further assistance, please contact YOUNGDO customer service through your purchase platform or visit the official YOUNGDO website. Provide your model number (0166) and a detailed description of the issue for efficient support.