Sarrera
Thank you for choosing the OnLyee CR1024 Projection Alarm Clock. This device is designed to provide convenient timekeeping, dual alarm functions, and environmental monitoring with a unique projection feature. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.
Kutxan dagoena
- OnLyee CR1024 Projection Alarm Clock Unit
- Energia egokitzailea (100-240V AC)
- USB korronte kablea
- Erabiltzailearen eskuliburua (dokumentu hau)
1. irudia: Contents of the product packaging, including the alarm clock, power adapter, and power cord.
Produktua amaituview
The OnLyee CR1024 features a large LED display and an integrated projector for time display on walls or ceilings. It includes various buttons for setting time, alarms, and adjusting display settings.
2. irudia: Aurrealdea view of the OnLyee CR1024 Projection Alarm Clock, showing the main display and a phone connected for charging.
Ezaugarri nagusiak:
- LED pantaila handia: 5.9-inch ultra-clear display for easy readability.
- Ultra-Clear Projection: 350° rotatable projector with 360° focus adjustment for time display on ceiling or wall (optimal distance 1.64-11.4ft).
- Distira erregulagarria: 5-level adjustable screen brightness and 5-level projection brightness.
- Alarma bikoitza: Set two independent alarms with four wake-up modes (weekend, workdays, all seven days, one-time).
- Temperature & Humidity Monitor: High-precision indoor temperature and humidity display.
- Atzeratzea Funtzioa: 9 minutuko errepikapena.
- Kargatzeko atakak: 1 USB and 1 Type-C charging port for external devices.
- Bateria babeskopia: Requires 2 AAA batteries (not included) for memory backup during power outages.
Konfigurazioa
- Potentzia-konexioa: Connect the provided power adapter to the DC input port on the back of the alarm clock and plug it into a standard 100-240V AC outlet. The display will light up.
- Battery Backup (Optional but Recommended): Open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve your time and alarm settings in case of a power interruption. Note: The display will not show time and alarms will not sound on battery power alone.
- Hasierako orduaren ezarpena:
- Press and hold the "TIME SET" button to enter time setting mode.
- Use the "+" or "-" buttons to adjust the hour, then press "TIME SET" to confirm.
- Errepikatu minutuetarako, urterako, hilabeterako eta egunerako.
- Press "TIME SET" again to exit.
- 12/24 Hour Format & DST:
- Short press the "12/24H & DST" button to switch between 12-hour and 24-hour time formats.
- Press and hold the "12/24H & DST" button to activate or deactivate Daylight Saving Time (DST).
3. irudia: Adjusting 12/24 hour format and DST.
Funtzionamendu-argibideak
Setting Alarms (Dual Alarm Function)
The clock supports two independent alarms (Alarm 1 and Alarm 2).
- Ezarri alarma 1:
- Press and hold the "AL1" button. The hour will flash.
- Use "+" or "-" to adjust the hour, then press "AL1" to confirm.
- Errepikatu minutuz.
- Select the alarm mode (Mon-Sun, Mon-Fri, Sat-Sun, One-Time) using "+" or "-". Press "AL1" to confirm.
- The alarm icon for Alarm 1 will appear on the display, indicating it is active.
- Ezarri alarma 2: Follow the same steps as Alarm 1, using the "AL2" button.
- Alarmaren bolumena doitzea: While an alarm is sounding or in alarm setting mode, use the "VOL" button to adjust the 7-level progressive buzzer volume (45-116dB).
4. irudia: Setting up dual alarms for different schedules.
Errepikatzeko funtzioa
When an alarm sounds, press the large "SNOOZE/OK/+" button on top of the clock to activate the 9-minute snooze function. The alarm will sound again after 9 minutes.
5. irudia: Activating the snooze function by pressing the top button.
Proiekzio Ezaugarria
- Proiekzioa aktibatu/desaktibatu: Press the "PROJECTOR" button to turn the projection on or off.
- Doitu proiekzio angelua: The projector arm can be rotated 350° to direct the time display where desired.
- Doitu fokua: Rotate the focus ring on the projector lens to achieve a clear and sharp image.
- Irauli proiekzioa: If the projected image is upside down, short press the "Power" button (often integrated with the projector control) to flip it 180°.
- Adjust Projection Brightness: Press the "DIM" button to cycle through 5 levels of projection brightness.
6. irudia: Steps for adjusting the projection display.
7. irudia: Different brightness levels for the projected time.
Display Brightness and Night Light
The main LED display brightness can be adjusted to suit your preference.
- Doitu pantailaren distira: Press the "DIM" button (if separate from projection dimming, or the same button if it cycles both) to cycle through 5 levels of display brightness.
- Gaueko argia: The clock features an adjustable night light. Use the dedicated night light button (if available, or a long press on DIM/SNOOZE) to turn it on/off and adjust its brightness.
8. irudia: Adjusting the main display brightness.
9. irudia: The integrated night light with adjustable intensity.
Kanpoko gailuak kargatzea
The alarm clock is equipped with a USB-A and a Type-C charging port.
- Connect your device's charging cable to the appropriate USB-A or Type-C port on the back of the alarm clock.
- Ensure the alarm clock is powered via the AC adapter for charging functionality.
10. irudia: Using the dual charging ports for external devices.
Mantentzea
- Garbiketa: Erabili zapi leun eta lehor bat iratzargailuaren gainazala garbitzeko. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Lekua: Place the alarm clock on a stable, flat surface. Avoid direct sunlight, excessive heat, or moisture.
- Bateria ordezkatzea: If using battery backup, replace the AAA batteries annually or when the backup function is no longer reliable.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Erlojuaren pantaila itzalita dago. | Ez dago korronte konexiorik edo korronte irteerariktage. | Ensure the power adapter is securely plugged into the clock and a working outlet. Check for power outages. |
| Alarmak ez du jotzen. | Alarm not set, alarm volume too low, or battery backup only. | Verify alarm settings and ensure the alarm icon is displayed. Increase alarm volume. Ensure the clock is powered by AC for alarm function. |
| Aurreikusitako denbora lausoa da. | Fokua ez dago behar bezala doituta. | Biratu proiektorearen lentearen fokatze-eraztuna irudia garbi egon arte. |
| Projected time is upside down. | Projection orientation needs adjustment. | Short press the "Power" button (often near the projector) to flip the image 180°. |
| Temperature/Humidity readings are inaccurate. | External factors affecting sensors. | Ensure the clock is not placed near heat sources, direct sunlight, or in areas with extreme drafts. Allow time for readings to stabilize after relocation. |
Zehaztapenak
| Modelo zenbakia: | CR1024 |
| Bistaratzeko mota: | LED digitala |
| Energia iturria: | Corded Electric (AC 100-240V), Battery Powered (2 x AAA for backup, not included) |
| Produktuaren neurriak: | 7.87 x 2.36 x 3.43 hazbete (20 x 6 x 8.7 cm) |
| Elementuaren pisua: | 7 ontza (240 gramo) |
| Materiala: | Akrilonitrilo Butadieno Estirenoa (ABS) |
| Tenperatura tartea: | -50 °C eta 70 °C (-58 °F eta 158 °F) |
| Hezetasun-barrutia: | % 1 eta % 99 RH |
| Proiekzio distantzia: | 1.64-11.4 oin (0.5-3 metro) |
Bermea eta laguntza
OnLyee provides the following support for your CR1024 Projection Alarm Clock:
- Bermea: 18 Months Limited Warranty.
- Posta elektronikoko laguntza: Responses typically within 8 hours.
- Bizi osorako laguntza: Ongoing assistance for the product's lifespan.
Laguntza gehiago behar baduzu, bisitatu OnLyee Store on Amazon or refer to the official user manual PDF available at esteka hau.
Produktuen Bideoa
1. bideoa: Bat baino gehiagoview of the OnLyee CR1024 Projection Alarm Clock, demonstrating its features including the projection, dual alarms, and display brightness adjustments. This video provides a visual guide to the clock's main functionalities and ease of use.
