LevelOne FCS-5202 Gemini 4 MP IP kamera finkoaren erabiltzailearen eskuliburua

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera. The FCS-5202 is an outdoor fixed camera designed for reliable and cost-effective IP surveillance networks. It is built to withstand various environmental conditions, including rain, extreme heat, snow, dust, and humidity. This camera delivers clear 4-megapixel resolution images and supports 802.3af Power over Ethernet (PoE) for combined power and data transmission over a single Cat.5 cable.

2. Produktua amaitu daview

2.1 Ezaugarri nagusiak

• 4 Megapixel High-Definition Resolution for clear and sharp images.
• Supports H.264, H.265, and MJPEG video compression for efficient storage and streaming.
• Integrated 802.3af Power over Ethernet (PoE) for simplified installation with a single cable.
• IP67 Weather-Resistant Casing ensures durability in outdoor environments.
• Advanced Motion Detection capabilities, including intrusion, camera tampering, and line crossing detection.
• Event notification support for immediate alerts.

2.2 Paketearen edukia

• LevelOne FCS-5202 IP Camera
• Installation Guide (refer to this manual)
• Muntatzeko Osagarriak

2.3 Kameraren diagrama

1. irudia: Aurrealdea eta alboa view of the LevelOne FCS-5202 Gemini 4 MP Fixed IP Camera, showing the lens, IR LEDs, and mounting bracket.

3. Konfigurazioa eta instalazioa

3.1 Segurtasun-neurriak

• Ziurtatu energia deskonektatuta dagoela instalazioa edo mantentze-lanak egin aurretik.
• Install the camera in a location that provides optimal viewing and is protected from direct impact.
• Use appropriate tools and follow local electrical codes.

3.2 Instalazio fisikoa

1. Aukeratu muntaketa-kokapen bat: Select a suitable outdoor location, preferably under an overhang, that offers a clear field of view and is within reach of a network cable with PoE.
2. Muntatu euskarria: Use the provided mounting accessories to securely attach the wall mount bracket to the chosen surface. Mark and drill pilot holes as necessary.
3. Erantsi kamera: Secure the camera to the mounting bracket. Adjust the camera's angle and orientation for the desired coverage.

3.3 Sarearen eta energiaren konexioa

1. Konektatu Ethernet kablea: Connect a Cat.5 or higher Ethernet cable from your PoE-enabled switch or PoE injector to the camera's Ethernet port. This single cable will provide both power and data.
2. Piztu: Once the Ethernet cable is connected to a PoE source, the camera will power on automatically. Allow a few minutes for the camera to boot up.

3.4 Hasierako konfigurazioa

1. Ezagutu Kamera: Use the LevelOne IP Camera Finder tool (available on the LevelOne website) or a network scanner to locate the camera's IP address on your network.
2. Sarbidea Web Interfazea: Ireki a web browser and enter the camera's IP address. You will be prompted to enter a username and password. Refer to the default credentials provided in the camera's packaging or on the manufacturer's webgunea.
3. Aldatu lehenetsitako kredentzialak: For security purposes, immediately change the default username and password to strong, unique credentials.
4. Sarearen ezarpenak: Configure network settings such as static IP address (recommended for surveillance devices), subnet mask, gateway, and DNS servers as per your network requirements.
5. Data eta ordua: Set the correct date and time, preferably by synchronizing with an NTP server.

4. Funtzionamendu-argibideak

4.1 Bizi View

After logging into the camera's web interfazea, joan "Live" atalera View" section to see the real-time video feed from the camera. You can typically adjust stream quality and view options here.

4.2 Bideo-grabaketa

• Grabaketa jarraitua: Configure the camera to record video continuously to a Network Video Recorder (NVR) or network-attached storage (NAS).
• Gertaerak eragindako grabaketa: Set up recording to activate only when specific events occur, such as motion detection.
• Programatutako grabazioa: Define specific time periods for recording.

4.3 Motion Detection and Event Management

1. Konfiguratu detekzio-eremuak: In the camera's settings, define specific areas within the camera's view non mugimenduaren detekzioa aktibo egon behar den.
2. Sentikortasun ezarpenak: Mugimendu-detekzioaren sentsibilitatea doitu alarma faltsuak gutxitzeko.
3. Gertaeren ekintzak: Specify actions to be taken when an event is detected, such as:
   • Sending email notifications.
   • Uploading recorded video clips to an FTP server.
   • Triggering an alarm output (if available).

4.4 Urruneko sarbidea

To access your camera remotely, you may need to configure port forwarding on your router or use a cloud-based service provided by LevelOne or a third-party NVR. Consult your router's manual or network administrator for port forwarding instructions.

5. Mantentzea

5.1 Kamera garbitzea

• Garbitu kameraren lentea eta karkasa aldizka zapi leun eta lehor batekinamp cloth to remove dust, dirt, and water spots.
• Do not use harsh chemicals or abrasive cleaners, as these can damage the lens or casing.
• Ziurtatu kamera itzalita dagoela garbitu aurretik.

5.2 Firmware eguneraketak

Periodically check the LevelOne official website for firmware updates. Firmware updates can provide new features, improve performance, and enhance security. Follow the instructions provided with the firmware update package carefully.

6. Arazoak

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information, please refer to the documentation provided with your purchase or contact your reseller. LevelOne provides technical support for its products. For assistance, please visit the official LevelOne webwebgunean edo jarri harremanetan bere bezeroarentzako arreta zerbitzuarekin.

Sareko baliabideak:

• LevelOne Official Webgunea: www.level1.com
• Produktuaren laguntza orria: Bilatu FCS-5202 on the LevelOne website for drivers, firmware, and FAQs.