SPI 31-040-9 PRO3600 angelu-garraiatzaile digitalaren erabiltzailearen eskuliburua

1. Sarrera

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

Ezaugarri nagusiak:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. Produktua amaitu daview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. Konfigurazioa

3.1 Bateriaren instalazioa

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Aurkitu bateriaren konpartimentuaren estalkia, normalean unitatearen azpialdean edo alboan.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. Itxi bateriaren konpartimenduaren estalkia ondo.

3.2 Hasierako piztea

After battery installation, press the ON/OFF button to power on the device. The LCD display should illuminate and show a reading.

4. Funtzionamendu-argibideak

4.1 Piztu/Itzali

• Unitatea pizteko ON, sakatu ON/OFF botoia.
• Unitatea pizteko OFF, sakatu ON/OFF botoia berriro.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. Sakatu ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO botoia berriro.

4.3 Holding a Reading

Uneko irakurketa pantailan izozteko:

• Sakatu EUTSI button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the EUTSI botoia berriro.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Measuring Angles

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. Mantentzea

5.1 Garbiketa

• Garbitu unitatea zapi leun eta lehor batekin.
• Zikinkeria egoskorrerako, pixka bat damp xaboi leun batekin oihal bat erabil daiteke, eta ondoren berehala lehortu.
• Ez erabili garbitzaile urratzailerik edo disolbatzailerik, eta ez murgildu unitatea uretan.

5.2 Biltegiratzea

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• Denbora luzez gordetzen baduzu, kendu bateriak isuriak saihesteko.

6. Arazoak

• Unitatea ez da pizten: Egiaztatu bateriaren instalazioa eta ziurtatu bateriak ez daudela agortuta. Ordeztu behar izanez gero.
• Irakurketa zehaztugabeak: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Unitatea ustekabean itzaltzen da: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• Pantaila ilun edo dir-dir egiten du: Bateriak agortuta egon daitezke. Ordeztu itzazu.

7. Zehaztapenak

8. Bermea eta Laguntza

8.1 Bermearen informazioa

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 Bezeroarentzako laguntza

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webgunea edo produktua erosi diozun dendaria.