Inkbird ITC-C216T Thermostat Instruction Manual

Sarrera

Thank you for choosing the Inkbird ITC-C216T Thermostat. This device is a versatile plug-and-play temperature controller designed for precise temperature management in a wide range of applications. It features three control modes: temperature, cycle time, and countdown, along with safety features like high/low temperature alarms and a child lock. This manual will guide you through the setup, operation, and maintenance of your thermostat to ensure optimal performance and safe use.

Segurtasun Informazioa

• Ensure the thermostat is connected to a grounded power outlet.
• Do not exceed the maximum load capacity of 10A, 220V AC (2200W).
• Keep the device away from water, except for the IP67 rated probe.
• Ez saiatu unitatea zeuk desmuntatzen edo konpontzen. Jarri harremanetan bezeroarentzako arreta-zerbitzuarekin arazorik izanez gero.
• Deskonektatu beti gailua garbitu edo mantentze-lanak egin aurretik.

Produktua amaituview

Osagaiak

Irudia: Detailed diagram of the Inkbird ITC-C216T thermostat with labeled components.

1. LCD with White Backlight: Displays current and set temperatures/times.
2. Operational Buttons: MODE, UP, SET, DOWN for navigation and setting adjustments.
3. Irteera: Max 10A (2200W at 220Vac) for connecting heating or cooling devices.
4. Tenperatura-zunda: 2m/79in long, IP67 waterproof for accurate temperature detection.
5. Sarrera: 100~240Vac 50/60Hz max 10A.
6. Berogailuaren ikonoa: Indicates heating operation.
7. Cooling Icon: Indicates cooling operation.
8. Timing Icon: Indicates timing function is active.
9. Haurren blokeoaren ikonoa: Haurren blokeoa aktibatuta dagoela adierazten du.
10. HASIERA: Displays start temperature or time.
11. GELDITU: Displays stop temperature or time.

Ezaugarri nagusiak

Irudia: The Inkbird ITC-C216T thermostat showcasing bere ezaugarri nagusiak.

• Argiztatutako LCD pantaila: Easy to read current and set values, even in low light.
• Three Control Modes: Temperature, Cycle Time, and Countdown.
• Tenperatura sorta zabala: Controls temperatures from -40°C to 100°C.
• Tenperatura altu/baxuko alarmak: Alarma-balio pertsonalizagarriak, txistea isilarazteko aukerarekin.
• Tenperatura-kalibrazioa: Allows for fine-tuning temperature readings.
• Cooling Delay: Protects cooling equipment from short cycling.
• Haurrentzako blokeoa: Ezarpenetan ustekabeko aldaketak saihesten ditu.
• Memoria Funtzioa: Retains all settings after a power interruption.
• IP67 iragazgaitza den zunda: Suitable for use in soil or submerged in water.

Konfigurazioa

1. Desegin: Carefully remove the thermostat and its components from the packaging.
2. Konektatu: Insert the thermostat into a standard 220V AC grounded power outlet. The LCD display will light up.
3. Konektatu gailua: Plug your heating or cooling device (e.g., heater, fan, refrigerator) into the output socket of the thermostat.
4. Posizio-zunda: Place the waterproof temperature probe in the environment where temperature control is needed (e.g., terrarium, water, soil). Ensure the probe is securely positioned and not directly exposed to heating elements or strong air currents that could affect readings.

Funtzionamendu moduak

The ITC-C216T thermostat supports three main control modes: Temperature Mode, Cycle Time Mode, and Countdown Mode. Please note that Temperature Mode and Timing functions cannot be used simultaneously.

1. Tenperatura Modua

Irudia: Visual representation of the thermostat's cooling and heating functions.

In Temperature Mode, the thermostat automatically controls your connected device (heater or cooler) to maintain a desired temperature range. The device will operate in heating or cooling mode based on your set START and STOP temperatures.

• Sakatu MODUA button repeatedly until the display shows the temperature mode (usually indicated by a thermometer icon).
• Sakatu EZARTU to enter setting mode. The START temperature will flash. Use the UP eta BEHERA buttons to adjust the desired START temperature.
• Sakatu EZARTU again to confirm and move to the STOP temperature. Adjust the STOP temperature using UP eta BEHERA.
• Sakatu EZARTU one more time to save the settings and exit.
• If START temperature is lower than STOP temperature, the thermostat operates in berokuntza modua.
• If START temperature is higher than STOP temperature, the thermostat operates in hozte modua.

2. Cycle Time Mode (P01)

Irudia: Diagram explaining the Cycle Time Mode (P01) operation.

This mode allows you to set a repeating ON/OFF cycle for your connected device. The time range is 0 to 99 hours and 59 minutes.

• Sakatu MODUA until P01 is displayed.
• Sakatu EZARTU. The ON time will flash. Adjust using UP/BEHERA.
• Sakatu EZARTU. The OFF time will flash. Adjust using UP/BEHERA.
• Sakatu EZARTU to save and exit. The device will now cycle ON and OFF according to your settings.

3. Countdown Mode (P02, P03, P04)

The Countdown Mode offers three sub-modes for specific timed operations:

• P02: Countdown ON
  

  Irudia: Diagram explaining the Countdown ON Mode (P02).

  The device will turn ON after the set countdown period.
• P03: Countdown OFF
  

  Irudia: Diagram explaining the Countdown OFF Mode (P03).

  The device will turn OFF after the set countdown period.
• P04: Countdown ON & OFF
  

  Irudia: Diagram explaining the Countdown ON&OFF Mode (P04).

  The device will turn ON after the first countdown, then turn OFF after a second countdown.

To set any Countdown Mode:

• Sakatu MODUA until P02, P03, or P04 is displayed.
• Sakatu EZARTU. The countdown time(s) will flash. Adjust using UP/BEHERA.
• Sakatu EZARTU gorde eta irteteko.

Ezarpen aurreratuak

Tenperatura-kalibrazioa (CA)

Irudia: Thermostat screen showing temperature calibration setting.

If you find that the temperature reading is inaccurate compared to a known reference thermometer, you can calibrate the device:

• With the device powered on, press and hold the EZARTU button for approximately 3 seconds to enter the parameter settings.
• Erabili UP/BEHERA buttons to navigate to the 'CA' (Calibration) setting.
• Sakatu EZARTU, gero erabili UP/BEHERA to adjust the calibration value (e.g., +0.5°C or -0.5°C).
• Sakatu EZARTU berresteko eta irteteko.

Cooling Delay (Pt)

Irudia: Thermostat screen showing refrigeration delay setting.

The cooling delay function prevents rapid cycling of cooling equipment, which can extend its lifespan.

• Enter parameter settings (press and hold EZARTU 3 segundoz).
• Navigate to 'Pt' (Cooling Delay).
• Adjust the delay time in minutes using UP/BEHERA.
• Sakatu EZARTU berresteko eta irteteko.

High/Low Temperature Alarms (AH/AL)

Irudia: Thermostat screen showing high temperature alarm with mute option.

Set custom high (AH) and low (AL) temperature alarm values. If the detected temperature exceeds these limits, an audible alarm will sound.

• Enter parameter settings.
• Navigate to 'AH' (High Alarm) or 'AL' (Low Alarm).
• Adjust the alarm temperature using UP/BEHERA.
• Sakatu EZARTU baieztatzeko.
• To mute the buzzer, press any button when the alarm sounds.

Haurrentzako blokeoa

Irudia: Thermostat displaying the child lock icon.

To prevent accidental changes to settings, activate the child lock:

• Eduki sakatuta UP eta BEHERA buttons simultaneously for approximately 3 seconds. The child lock icon will appear on the display.
• Repeat the action to unlock the device.

Memoria Funtzioa eta Fabrika Berrezarri

• Memoria Funtzioa: The thermostat automatically saves all your settings. In case of a power outage, the device will resume operation with the last saved settings once power is restored.
• Fabrikaren berrezarpena: To restore the device to its default factory settings, consult the full user manual or contact Inkbird support for specific instructions.

Aplikazioak

Irudia: Diverse applications of the Inkbird ITC-C216T thermostat.

The Inkbird ITC-C216T thermostat is suitable for a wide range of temperature control needs, including but not limited to:

• Reptile Terrariums and Aquariums
• Greenhouses and Plant Propagation
• Incubators for Eggs
• Home Brewing and Fermentation
• Controlling Freezers and Refrigerators
• Managing Heating Mats and other Home Appliances

Zehaztapenak

Arazoak konpontzea

If you encounter issues with your Inkbird ITC-C216T thermostat, please refer to the following common solutions:

• Pantaila ez argitzen: Ensure the thermostat is securely plugged into a live power outlet. Check the power supply.
• Tenperatura-irakurketa okerra: Verify the probe is correctly placed and not damaged. Perform a temperature calibration (refer to Advanced Settings).
• Gailua ez da pizten/itzaltzen: Check if the connected heating/cooling device is functioning correctly. Ensure the thermostat is in the correct operating mode (Temperature, Cycle Time, or Countdown) and that settings are properly configured. Verify the child lock is not active.
• Alarma etengabe jotzen du: Check the high/low alarm settings (AH/AL) and the current temperature. Adjust alarm values if necessary or mute the buzzer by pressing any button.
• Settings Not Saving: The device has a memory function. If settings are not retained, try a factory reset (consult full manual) or contact support.

For more detailed troubleshooting or persistent issues, please contact Inkbird customer support.

Mantentzea

• Garbiketa: Disconnect the thermostat from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• Zunda zaintzea: Regularly inspect the temperature probe for any signs of damage. Clean the probe gently if it accumulates debris, especially if used in water or soil.
• Biltegiratzea: If storing the device for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Bermea eta Laguntza

Inkbird products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms, registration, or technical support, please visit the official Inkbird webgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin.

Informazio gehiago eta laguntza baliabideak aurki ditzakezu bisitatuz Inkbird denda Amazonen.