1. Sarrera
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
Paketearen edukia:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer

Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. Segurtasun informazioa
- UL zerrendatua: This product is UL-Listed, ensuring compliance with safety standards.
- Vol. Baxuatage: Operates on 5V DC, making it safe to touch for pets and children.
- Barruko erabilera soilik: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- Energia iturria: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- Instalazioa: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- Ebaketa: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- Beroa: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. Konfigurazioa eta instalazioa
- Prestatu gainazala: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- Neurtu eta moztu (aukerakoa): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).

Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- Itsasgarri kengarriaren euskarria: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- Lotu tira: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.

Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- Konektatu energia: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).

Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. Funtzionamendu-argibideak
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- Aktibatu/Desaktibatuta: Piztu edo itzali argiak.
- Distira doitzea: Increase or decrease brightness (5 levels).
- Tenporizadorearen funtzioak: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- Memoria Funtzioa: The lights will restore to their last brightness setting when turned back on.

Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.

Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- Pizteko botoia: Turns the lights on/off.
- Brightness Up (+): Distira handitzen du.
- Brightness Down (-): Distira gutxitzen du.

Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. Mantentzea
- Garbiketa: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- Itsasgarria: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- Biltegiratzea: Denbora luzez erabiltzen ez baduzu, gorde LED zerrenda leku fresko eta lehor batean, eguzki-argitik babestuta.
6. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argiak ez dira pizten. | No power, loose connection, faulty USB port. |
|
| Argiak dir-dir egiten ari dira. | Energia-hornidura nahikoa ez. |
|
| Urruneko kontrola ez dabil. | Battery issue, interference. |
|
| Bandaren atal batzuk ez dira argitzen. | Damage to the strip. |
|
7. Zehaztapenak
- Eredua: RF-SWW320COB-USB-2M-3000K-NEW
- Marka: PAUTIX
- Argi iturri mota: COB LED
- Kolore Tenperatura: 3000K Zuri Epela
- Luzera: 6.56 oinak (2 metro)
- LEDs per Meter: 320 LEDs/m (Total 640 LEDs)
- liburukiatage: 5 voltio (DC)
- Wattage: 9.5 watt
- Argi-fluxua: 1200 lumen
- Koloreen errendatze indizea (CRI): >90
- Ezaugarri bereziak: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- Bizi-iraupena: > 65,000 ordu
- Sarrera babesteko (IP) balorazioa: IP30 (Barruko erabilera soilik)
- Materiala: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- Elikatze-kablearen luzera: 2.6 oin
- UPC: 717994811924
8. Bermea eta Laguntza
PAUTIX is committed to customer satisfaction. This product comes with a 5 urteko bermea, kalitatea eta fidagarritasuna bermatuz.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
Harremanetarako informazioa: Please refer to the product packaging or the official PAUTIX webwebgunean bezeroarentzako arreta-zerbitzuko harremanetarako datu eguneratuenak lortzeko.



