CPVAN 3-in-1 Carbon Monoxide Detector User Manual

Sarrera

This user manual provides essential information for the proper installation, operation, and maintenance of your CPVAN 3-in-1 Carbon Monoxide Detector. This device is designed to detect carbon monoxide (CO) gas, and also displays ambient temperature and humidity. It features a 10-year electrochemical sensor and is powered by a 4-year replaceable battery, certified to EU standard EN50291. Please read this manual thoroughly before using the product to ensure safe and effective operation.

1. irudia: Aurrealdea view of the CPVAN 3-in-1 Carbon Monoxide Detector, showing the display and indicator light.

Segurtasun Informazioa

Garrantzitsua: This device is a carbon monoxide (CO) detector, not a smoke detector or a carbon dioxide (CO2) detector. It is designed to detect carbon monoxide gas from sources such as faulty combustion appliances.

• Do not paint the detector. Paint may clog the openings and interfere with the sensor's ability to detect CO.
• Do not block the ventilation openings on the detector.
• Aldian-aldian probatu detektagailua eskuliburu honetan azaltzen den bezala.
• Do not install the detector in areas with high humidity, extreme temperatures, or excessive dust.
• In case of an alarm, evacuate the premises immediately and call emergency services. Do not re-enter until the area has been declared safe.
• The device cannot replace a smoke or gas alarm.

Paketearen edukia

Irekitzean, egiaztatu paketearen edukia elementu guztiak daudela eta kalterik ez dagoela ziurtatzeko.

• 1 × CPVAN Carbon Monoxide Detector (Model: COS-X3 plus)
• 2 × 1.5V AA Alkaline Batteries
• 2 × Wall Plugs
• 2 × Torlojuak
• 1 × Erabiltzailearen eskuliburua

Produktua amaituview

The CPVAN 3-in-1 Carbon Monoxide Detector integrates CO detection with temperature and humidity monitoring.

2. irudia: The detector's display indicates Carbon Monoxide (CO) levels, relative humidity (%RH), and temperature (°C). When CO concentration is below 25 ppm, only temperature and humidity are displayed.

Funtsezko osagaiak:

• LCD pantaila: Shows CO concentration (PPM), relative humidity (%RH), and temperature (°C).
• Probatu/Berrezarri botoia: Used to test the alarm function and reset the device.
• Argi adierazlea: Displays device status (Green for normal, Yellow for fault, Red for alarm).
• Alarma burrunbagailua: CO alarma baten aurrean soinu ozen bat igortzen du.
• Bateriaren konpartimendua: Located on the back for AA batteries.

3. irudia: Visual representation of the indicator light states: Green for normal operation, Yellow for fault, and Red for CO alarm.

Konfigurazioa

1. Bateriaren instalazioa

The detector requires two 1.5V AA alkaline batteries (included).

1. Ireki detektagailuaren atzealdean dagoen bateriaren konpartimentuaren estalkia.
2. Remove the plastic insulating strip from the pre-installed batteries.
3. Sartu bi AA pilak, polaritate zuzena ziurtatuz (+ eta -).
4. Close the battery compartment cover securely. The device will automatically power on.

4. irudia: Illustration of the battery compartment on the back of the detector, showing where to insert the two AA alkaline batteries.

2. Muntaketa eta kokapena

Proper placement is crucial for effective CO detection. Install the detector in locations where CO may be produced. The closer it is to a potential CO source, the sooner the alarm will activate.

• Gomendatutako kokapenak: Near combustion appliances (furnaces, water heaters, fireplaces), in living areas, and bedrooms.
• Saihestu: Directly above heat sources, in direct sunlight, near windows or vents, in dusty or humid areas, or behind curtains/furniture that could obstruct the sensor.
• Instalazioaren altuera: For optimal detection, install the detector at a height between your waist and head level, or as per local regulations.

1. Aukeratu horma-kokapen egokia.
2. Mark the positions for the two screws using the detector's mounting holes as a guide.
3. Drill two holes and insert the wall plugs.
4. Insert the screws, leaving a small gap from the wall.
5. Align the detector's mounting slots with the screws and slide it down to secure it.

5. irudia: The detector can be easily mounted on a wall using the provided screws and wall plugs.

6. irudia: Example of optimal placement for CO detectors (red squares), heat alarms (green triangles), and smoke alarms (blue circles) within a typical home layout.

Funtzionamendua

1. Hasierako piztea

After battery installation, the device will perform a self-test. The display will show a brief sequence, and the green indicator light will flash. Once initialized, it will display temperature and humidity. The green light will flash approximately every 60 seconds in standby mode.

2. Bistaratu informazioa

LCD pantailak denbora errealeko informazioa ematen du:

• Tenperatura: Shown in degrees Celsius (°C).
• Hezetasuna: Shown as relative humidity (%RH).
• CO2-aren kontzentrazioa: Displayed in parts per million (PPM). If CO concentration is below 25 ppm, only temperature and humidity are shown. CO concentration is updated every 4 seconds.

7. irudia: The real-time display shows current humidity and temperature. CO concentration is displayed when it exceeds 25 PPM, with different alarm cycles based on CO levels.

3. Alarma probatzea

It is recommended to test the detector weekly to ensure proper function.

• Press and hold the Test/Reset button on the front of the detector.
• The alarm will sound loudly, and the red indicator light will flash. The display will show a high CO reading (e.g., "MAX 58 PPM CO").
• Askatu botoia proba gelditzeko.

Alternatively, you can test by holding the detector near burning materials like paper or cigarettes for 5-10 seconds. Incomplete combustion typically produces carbon monoxide. If the detector functions correctly, it will display CO concentration and sound an audible alarm.

8. irudia: When CO is detected above the alarm threshold, the red light flashes and the alarm sounds.

4. Alarm Conditions and Behavior

The detector is certified to EN-50291 standards. Alarm thresholds are as follows:

When an alarm occurs, the red indicator light will flash rapidly, and the buzzer will emit a loud, continuous alarm sound. The display will show the detected CO concentration.

What to do if the alarm sounds:

1. Atera berehala kanpoko aire freskora edo ireki ate eta leiho guztiak eremua aireztatzeko.
2. Egin buru-zenbaketa pertsona guztiak zenbatuta daudela egiaztatzeko.
3. Ez sartu berriro lokalera alarma gelditu eta eremua ondo aireztatu arte.
4. Deitu larrialdi zerbitzuei edo teknikari kualifikatu bati COaren iturria ikertzeko.

Mantentzea

1. Bateria ordezkatzea

The detector is designed with a 4-year replaceable battery life. When the batteries are low, the device will indicate this with a specific warning (e.g., a chirp or a low battery icon on the display). Replace both AA alkaline batteries promptly when this occurs. Refer to the "Battery Installation" section for replacement steps.

2. Garbiketa

Clean the detector regularly to prevent dust buildup from affecting its performance.

• Erabili biguna, damp zapi bat detektagailuaren kanpoaldea garbitzeko.
• Do not use cleaning sprays, solvents, or abrasive cleaners.
• Ez margotu detektagailua.

3. Ohiko probak

Test the detector weekly using the Test/Reset button to ensure the alarm and sensor are functioning correctly.

Arazoak konpontzea

Zehaztapenak

Bermea eta Laguntza

For warranty information and customer support, please refer to the documentation provided with your purchase or contact CPVAN customer service directly.

Manufacturer: SafeBay
Contact information may be available on the product packaging or the official CPVAN webgunea.

Produktu Ofizialaren Bideoak

No official product videos with "Seller" as creator type were found in the provided data.