hygger HG121-8W

hygger HG121-8W 5-in-1 Aquarium Internal Filter Instruction Manual

Model: HG121-8W

Sarrera

Thank you for choosing the hygger HG121-8W 5-in-1 Aquarium Internal Filter. This versatile filter is designed to provide comprehensive water purification and circulation for your aquarium, offering multiple functional modes to suit various aquatic environments. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

Produktuaren Ezaugarriak

Paketearen edukia

Mesedez, egiaztatu osagai guztiak daudela instalazioarekin jarraitu aurretik:

Konfigurazio Argibideak

  1. Deskargatu eta ikuskatu: Kontu handiz atera osagai guztiak paketetik. Egiaztatu kalterik dagoen.
  2. Assemble Filter Media: The filter unit typically comes with pre-installed media. If not, insert the biochemical sponge into the bottom compartment, followed by activated carbon, and then the bioceramic balls into the top compartment. Ensure they are seated correctly.
  3. Attach Output Accessories:
    Image showing different filter output accessories like rain shower, aeration, wave making, and fountain modes.

    This image illustrates the various output accessories and how they connect to the filter head for different functional modes.

    • Euria: Connect the rain shower bar to the filter's output nozzle.
    • Aireztapena: Attach the aeration tube to the designated air intake port on the filter head.
    • Fountain/Water Exchange: Attach the fountain nozzle or appropriate connector for water exchange.
  4. Secure Filter in Tank: Attach the four strong suction cups to the back of the filter unit. Submerge the filter completely in your aquarium water and press the suction cups firmly against the inner glass wall to secure it. Ensure the filter is positioned vertically and the water level is above the minimum water level mark indicated on the filter unit.
    Image showing the hygger internal filter installed in an aquarium, demonstrating the rain shower function.

    This image shows the filter unit securely attached to the aquarium wall, with the rain shower output positioned above the water surface.

  5. Konektatu energia: Plug the DC 5V adapter into a standard electrical outlet and connect the USB port to the filter's power cable.

Funtzionamendu-argibideak

  1. Piztu: Once the filter is properly installed and submerged, plug in the power adapter. The filter will begin operating immediately.
  2. Adjust Flow Rate: Use the adjustable flow knob located on the filter head to increase or decrease the water flow rate as desired.
  3. Adjust Airflow (if using aeration): If the aeration tube is connected, you can adjust the amount of air introduced into the water by manipulating the air intake valve on the tube.
  4. Change Functional Modes: To switch between functions (e.g., from rain shower to fountain), you may need to detach one accessory and attach another. Ensure the filter is unplugged before making any changes to accessories.

Mantentzea

Regular cleaning is crucial for maintaining the efficiency and longevity of your filter. It is recommended to clean the filter every 1-2 weeks.

  1. Deskonektatu energia: Always unplug the filter from the power source before performing any maintenance.
  2. Remove from Tank: Gently detach the filter from the aquarium wall.
  3. Desmuntatu iragazkia: Carefully separate the filter compartments. Note the order of the filter media for correct reassembly.
    Image showing the internal filter disassembled, highlighting the bioceramic balls, biochemical sponge, and activated carbon filter media.

    This image displays the filter's internal structure and the three types of filter media: bioceramic balls, biochemical sponge, and activated carbon.

  4. Clean Filter Media: Rinse the biochemical sponge and bioceramic balls with old aquarium water (from a water change) to preserve beneficial bacteria. Do not use tap water directly, as chlorine can harm these bacteria. Activated carbon should be replaced every 2-4 weeks, or as needed, as its adsorptive capacity diminishes over time.
  5. Clean Impeller and Housing: Use a small brush to clean the impeller and the impeller housing to remove any debris or algae buildup.
  6. Berriro muntatu eta instalatu: Reassemble the filter in the reverse order of disassembly, ensuring all parts are securely fitted. Reinstall the filter in the aquarium and reconnect power.

Arazoak konpontzea

ArazoaKausa posibleaIrtenbidea
Filter not starting or weak flowPower disconnected; Impeller jammed or dirty; Filter media clogged; Air in pump.Check power connection; Clean impeller and housing; Clean or replace filter media; Gently shake filter to release air.
Gehiegizko zarataImpeller dirty or damaged; Air in pump; Filter not securely mounted.Clean or replace impeller; Gently shake filter to release air; Re-secure filter to tank wall.
Water not clearFilter media saturated or dirty; Filter too small for tank size; Insufficient water changes.Clean or replace filter media; Ensure filter is appropriate for tank volume; Perform regular water changes.

Zehaztapenak

Image showing a table of specifications for different hygger filter models, including dimensions, power, flow rate, and recommended tank size.

This image provides a detailed specification table for the HG121-8W model, alongside other variants, outlining dimensions, power, flow, and tank suitability.

AtributuaBalioa
Modelo zenbakiaHG121-8W
Boterea8W
liburukiatage SarreraAC 110-240V
liburukiatage IrteeraDC 5V
Gehienezko Emaria61 GPH (230 L/H)
Gehienezko Burua2.6 oin (0.8 m)
Neurriak (L x W x H)2.0 hazbeteko x 1.6 hazbeteko x 8.7 hazbeteko
Elikatze-kablearen luzera4.92 oin
Gomendatutako Tankaren Tamaina2-13 galoi (8-50 litro)

Bermea eta Laguntza

For warranty information or technical support, please contact hygger customer service through the retailer where the product was purchased or visit the official hygger webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.