HOFTRONIC Q-Series LED Wet Room Lamp 150 cm

1. Sarrera

Thank you for choosing the HOFTRONIC Q-Series LED Wet Room Lamp. This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your new luminaire. Please read this manual thoroughly before installation and retain it for future reference.

The HOFTRONIC Q-Series LED Wet Room Lamp is designed for demanding environments, offering robust protection against water, dust, and impact. Its energy-efficient LED technology provides bright, neutral white light suitable for various applications.

2. Segurtasun informazioa

• Segurtasun elektrikoa: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Produktuaren osotasuna: Do not modify or disassemble the luminaire. Any modifications will void the warranty and may pose a safety risk.
• Ingurune operatiboa: Ensure the operating temperature range of -20°C to +40°C is respected. Do not expose the luminaire to corrosive chemicals not specified in its protection ratings.
• Kalteak: If the luminaire or its cable is damaged, do not use it. Contact a qualified technician for repair or replacement.
• Xedapena: Dispose of the product responsibly at the end of its lifespan, following local regulations for electronic waste.

3. Paketearen edukia

Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela:

• HOFTRONIC Q-Series LED Wet Room Lamp (integrated LED)
• Muntatzeko klipak (2x)
• Torlojuak eta tapoiak
• Argibide eskuliburua

4. Konfigurazioa eta instalazioa

4.1 Mounting the Luminaire

The luminaire is designed for wall or ceiling mounting. Use the provided mounting clips, screws, and wall plugs.

1. Markatzea: Determine the desired mounting location. Mark the positions for the mounting clips on the surface. Ensure the distance between the clips matches the luminaire's mounting points.
2. Zulaketa: Drill holes at the marked positions. Insert the wall plugs into the drilled holes.
3. Attaching Clips: Secure the mounting clips to the surface using the provided screws.
4. Mounting Luminaire: Carefully click the luminaire into the attached mounting clips. Ensure it is securely fastened.

Irudia: Mounting steps for the HOFTRONIC Q-Series LED Wet Room Lamp. The diagram illustrates drilling, inserting wall plugs, attaching mounting clips, and then clicking the lamp lekuan jarri.

4.2 Konexio elektrikoa

The HOFTRONIC Q-Series features a quick connect system for fast and tool-free electrical installation. It also supports linking multiple luminaires.

• Potentzia deskonexioa: Before making any electrical connections, ensure the main power supply is switched off.
• Accessing Quick Connect: Rotate the end cap of the luminaire to access the quick connect terminals.
• Kableatua: Insert the stripped ends of your power cable (220-240V AC) into the quick connect terminals. Ensure a secure connection for Live, Neutral, and Earth wires.
• Bermatzea: Once connected, rotate the end cap back to its original position to seal the connection and maintain the IP65 rating.

Irudia: The quick connect system allows for fast and secure electrical installation by rotating the end cap to reveal the terminals.

4.3 Linking Multiple Luminaires

Up to 8 HOFTRONIC Q-Series luminaires can be linked together using the integrated PG11 cable glands for a continuous lighting solution.

1. Prestatu kableak: Use appropriate electrical cables with a diameter between 5 mm and 9 mm for linking.
2. Connect First Luminaire: Connect the first luminaire to the main power supply as described in Section 4.2.
3. Link Luminaires: Connect the linking cable between the PG11 cable glands of the first and second luminaire. Ensure proper wiring (Live to Live, Neutral to Neutral, Earth to Earth).
4. Konexio seguruak: Tighten the PG11 cable glands to ensure a watertight seal and maintain the IP65 rating.
5. Errepikatu: Repeat the linking process for additional luminaires, up to a maximum of 8 units.

Irudia: Multiple HOFTRONIC Q-Series lamps can be linked together using a connecting cable through the PG11 cable glands, supporting up to 8 fixtures.

5. Funtzionamendu-argibideak

The HOFTRONIC Q-Series LED Wet Room Lamp is designed for straightforward operation.

• Piztu/Itzali: Once correctly installed and wired, the luminaire will turn on when power is supplied to its circuit and turn off when power is disconnected. This is typically controlled by a wall switch connected to the circuit.
• Erregulagarria ez: This luminaire is not dimmable. Do not connect it to a dimmer switch, as this may cause damage to the product and void the warranty.
• Diffuse Light: The Q-Series lamp provides diffuse light, which minimizes glare and creates a comfortable lighting environment, ideal for workshops, garages, and warehouses.

Irudia: The HOFTRONIC Q-Series provides diffuse light, which reduces glare compared to non-diffuse light sources, enhancing visual comfort.

6. Mantentzea

The HOFTRONIC Q-Series LED Wet Room Lamp mantentze minimoa behar du.

• Garbiketa: Ensure the power is off before cleaning. Wipe the luminaire with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or compromise the IP rating.
• Ikuskapena: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: The integrated LED light source is not replaceable by the user. Do not attempt to open the sealed unit.

7. Arazoak

If you encounter issues with your HOFTRONIC Q-Series LED Wet Room Lamp, ikusi hurrengo taula:

If the problem persists after attempting these solutions, please contact HOFTRONIC customer support or a qualified electrician.

8. Zehaztapenak

Detailed technical specifications for the HOFTRONIC Q-Series LED Wet Room Lamp:

Irudia: Dimensional drawing of the HOFTRONIC Q-Series LED Wet Room Lamp.

Irudia: EU Energy Label for HOFTRONIC Q-Series LED Wet Room Lamp, Model 2710033. The label indicates an energy efficiency class E and an energy consumption of 48 kWh/1000h.

For more detailed product information, please refer to the EPREL database: https://eprel.ec.europa.eu/qr/1783929

9. Aplikazioak

The HOFTRONIC Q-Series LED Wet Room Lamp is suitable for a wide range of indoor and outdoor applications due to its robust design and high protection ratings:

• Workshops and Garages
• Warehouses and Storage Facilities
• Basements and Cellars
• Cold Rooms and Refrigeration Units
• Industrial Kitchens
• Car Washes and Humid Environments
• Public Spaces (due to IK08 vandal resistance)

Irudia: Examples of the HOFTRONIC Q-Series LED lamp in use, including a car wash, warehouse, cold storage, and fruit storage.

Irudia: Aplikazio gehiago adibidezamples, demonstrating the lamp's versatility in a supermarket, workshop, home garage, and auto repair shop.

10. Bermea eta Laguntza

HOFTRONIC products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official HOFTRONIC webgunea.

For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or HOFTRONIC customer service. Ensure you have your model number (2710033) and proof of purchase available.

11. Ingurumenari buruzko informazioa

This product contains electronic components and should not be disposed of with general household waste. Please recycle it at designated collection points for electrical and electronic equipment (WEEE) in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.