Graco Ultra XT 490

Graco Ultra XT 490 Hi-Boy Airless ihinztagailu elektrikoaren argibideen eskuliburua

Model: Ultra XT 490 | Brand: Graco

1. Sarrera

This instruction manual provides comprehensive guidance for the safe and efficient operation, setup, maintenance, and troubleshooting of your Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The Graco Ultra XT 490 Hi-Boy is designed for professional painting applications, featuring advanced technologies for enhanced performance and durability. Key features include:

  • Xtreme Torque Motor Technology: Errendimendu indartsua eta koherentea eskaintzen du.
  • RapidResponse Control: Ensures quick and precise pressure adjustments.
  • Selectable Performance Modes: Allows optimization for various materials and applications.
  • Easy-to-Read LED Digital Display: Offers clear visibility of operational settings.
  • Endurance Vortex Piston Pump with ProConnect: Delivers extended pump life and easy on-the-job pump replacement.
  • TurboClean Cleaning System: Facilitates fast and thorough cleaning.
Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer, front-side view with hose and gun
Figure 1: Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer, showing the main unit, hose, and Contractor PC Gun.

2. Segurtasun informazioa

Always observe the following safety precautions to reduce the risk of injury or property damage. Failure to follow these instructions can result in serious injury or death.

  • Irakurri argibide guztiak ekipoa erabili aurretik.
  • Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a respirator.
  • Ziurtatu lan-eremua ondo aireztatuta dagoela eta su-iturrietatik libre dagoela.
  • Never point the spray gun at yourself or others. High-pressure fluid can cause serious injury.
  • Always relieve pressure before cleaning, servicing, or removing any parts.
  • Use only Graco-approved replacement parts and accessories.
  • Mantendu haurrak eta maskotak ekipotik urrun funtzionatzen ari diren bitartean.
  • Do not operate the sprayer if any part is damaged or malfunctioning.
  • Connect the sprayer to a properly grounded electrical outlet.

3. Paketearen edukia

Verify that all components are present in the package before beginning setup:

  • Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer Unit
  • Contractor PC Gun
  • Presio handiko mahuka
  • RAC X LP 517 SwitchTip
  • Argibide eskuliburua (dokumentu hau)

4. Konfigurazioa

Follow these steps for initial setup of your Graco Ultra XT 490 Hi-Boy sprayer:

  1. Despaketatzea: Kontu handiz atera osagai guztiak paketetik. Begiratu bidalketa-kalterik dagoen.
  2. Positioning the Sprayer: Place the sprayer on a stable, level surface in a well-ventilated area. Ensure adequate space for operation and movement.
  3. Hodia konektatzea:
    • Connect one end of the high-pressure hose to the fluid outlet on the sprayer. Tighten securely with a wrench.
    • Connect the other end of the high-pressure hose to the inlet of the Contractor PC Gun. Tighten securely.
  4. Installing the Spray Tip:
    • Ensure the spray gun trigger guard is engaged.
    • Insert the RAC X LP 517 SwitchTip into the tip guard on the Contractor PC Gun.
    • Rotate the tip 180 degrees to the spray position.
  5. Potentzia-konexioa: Connect the sprayer's power cord to a grounded 120V AC electrical outlet.
Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer, front view
2. irudia: Aurrealdea view of the Graco Ultra XT 490 Hi-Boy sprayer, illustrating the main unit and cart assembly.

5. Funtzionamendu-argibideak

This section outlines the general operating procedures for the Graco Ultra XT 490 Hi-Boy sprayer. Always refer to the specific instructions for your chosen coating material.

  1. Ihinztagailua prestatzea:
    • Place the suction tube into the paint container and the drain tube into a waste bucket.
    • Turn the prime valve to the "Prime" position.
    • Turn on the sprayer. The pump will begin to draw material.
    • Once material flows smoothly from the drain tube, turn off the sprayer.
    • Turn the prime valve to the "Spray" position.
  2. Presioa doitzea:
    • Ihinztagailua piztu.
    • Use the RapidResponse Control and Easy-to-Read LED Digital Display to set the desired pressure. Start with a lower pressure and gradually increase until a consistent spray pattern is achieved.
    • Select the appropriate performance mode for your material and application using the selectable performance modes feature.
  3. Ihinztadura teknika:
    • Hold the Contractor PC Gun perpendicular to the surface, maintaining a consistent distance.
    • Begin moving your arm before pulling the trigger and release the trigger before stopping your arm movement.
    • Overlap each pass by approximately 50% to ensure even coverage.
  4. Itzaltzea:
    • Ihinztagailua itzali.
    • Engage the trigger guard on the spray gun.
    • Relieve pressure by turning the prime valve to the "Prime" position and holding the gun over a waste bucket until pressure is released.
Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer, side view
3. irudia: Aldea view of the Graco Ultra XT 490 Hi-Boy sprayer, highlighting the motor and pump assembly.

6. Mantentzea

Regular maintenance ensures the longevity and optimal performance of your Graco Ultra XT 490 Hi-Boy sprayer.

  1. Erabilera bakoitzaren ondoren garbiketa:
    • Utilize the TurboClean Cleaning System for quick and efficient flushing of the system.
    • Flush the sprayer with an appropriate cleaning solution (water for latex, mineral spirits for oil-based paints) until the fluid runs clear.
    • Clean the spray gun, tip, and filter thoroughly.
  2. Ponpa mantentzea:
    • The Endurance Vortex Piston Pump with ProConnect allows for easy on-the-job pump replacement. Refer to the ProConnect instructions for detailed replacement procedures if necessary.
    • Regularly check the pump for wear and tear.
  3. Biltegiratzea:
    • Store the sprayer in a clean, dry, and frost-free environment.
    • Always relieve pressure before storing.
    • For long-term storage, circulate pump protector fluid through the system.

7. Arazoak

This section addresses common issues you might encounter with your Graco Ultra XT 490 Hi-Boy sprayer. For more complex problems, contact Graco customer support.

ArazoaKausa posibleaIrtenbidea
Ihinztadurarik ez edo ihinztadura ahulaClogged tip, low pressure setting, air in system, worn pump.Clean or replace tip, increase pressure, prime system, inspect pump.
Spray pultsatuaAir leak in suction hose, clogged filter, worn packings.Check hose connections, clean filters, replace packings.
Motorra martxan da baina presiorik gabePrime valve in wrong position, clogged inlet strainer, dry pump.Ensure prime valve is in "Spray", clean strainer, prime pump.

8. Zehaztapenak

EzaugarriXehetasuna
MarkaGraco
Ereduaren izenaUltra XT 490
Elementuaren eredu-zenbakia19D521
Energia iturria120V elektrikoa
Presio maximoa3300 PSI (Libra hazbete karratu bakoitzeko)
Gomendatutako ErabilerakPintura
MaterialaPlastic (housing components)
EstiloaCart-mounted, Hi-Boy
Elementuaren pisua78 kilo
Paketearen neurriak33 x 25.5 x 22 hazbete
UPC769946346305

9. Bermea eta Laguntza

Graco products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Graco website. For technical support, replacement parts, or service inquiries, please contact Graco customer service directly.

Informazio gehiago eta laguntza baliabideak aurki ditzakezu hemen: Graco Brand Store.

Erlazionatutako dokumentuak - Ultra XT 490

Aurreview Graco Electric Airless ihinztagailuen funtzionamendu eta piezen eskuliburua (3A6491L)
Graco Electric Airless ihinztagailuen (490, 495, 595, 650, 395EU modeloak) funtzionamendu eta piezen eskuliburu osoa. Erabilera profesionalerako konfigurazioa, segurtasuna, funtzionamendua, mantentze-lanak, arazoak konpontzea eta piezen identifikazioa biltzen ditu.
Aurreview Graco Ultra Max 795 Airless pintura-ihinztagailua: Argibideak eta piezen zerrenda
Graco Ultra Max 795 Airless Paint Sprayer-erako (232140, 232141 modeloak) argibide osoak, piezen zerrenda, arazoak konpontzeko gida eta konponketa prozedurak. Konfigurazioa, funtzionamendua, mantentze-lanak eta osagaien ordezkapena biltzen ditu.
Aurreview Graco 695 ihinztagailu elektriko airegabea: funtzionamendua, piezak eta konponketa eskuliburua
Graco 695 ihinztagailu elektriko airegabearen eskuliburu osoa, funtzionamendua, piezen identifikazioa, konfigurazioa, abiaraztea, mantentze-lanak, arazoak konpontzea eta konponketa-prozedurak biltzen dituena. Segurtasun-abisuak eta zehaztapen teknikoak barne hartzen ditu.
Aurreview Graco GX19 Airless Sprayer Operation Risk Assessment and User Guide
Comprehensive risk assessment and operational guide for the Graco GX19 Airless Sprayer, covering setup, startup, spraying techniques, cleanup, and storage. Includes safety warnings and material compatibility information.
Aurreview Graco 390 ihinztagailu elektriko airegabea: funtzionamendu eta piezen eskuliburua
Graco 390 ihinztagailu elektriko airlessetarako gida osoa, funtzionamendua, konfigurazioa, segurtasun argibideak, arazoak konpontzea eta piezen identifikazioa barne hartzen dituena erabilera profesionalerako.
Aurreview Graco Magnum GX19 Sprayer Quick Guide: Setup, Operation, and Maintenance
Concise guide for Graco Magnum GX19 sprayer, covering setup, startup, spraying, cleanup, and storage. Includes safety warnings and operational tips for airless spray painting.